Article

Simulating Contact and Friction within the Discrete Body Dynamics Formalism

Franco Y, Degani A. Simulating Contact and Friction within the Discrete Body Dynamics Formalism. Journal of Engineering Mechanics. 2026 Nov 1;152(11):04026081. [DOI] [Link to publication in Scopus]
 

Contact and friction significantly influence the dynamics of mechanical systems. This study presents an approach for modeling contact and friction forces within the discrete body dynamics (DBD) framework, which solves the equations of motion as ordinary differential equations by replacing kinematic constraints with compliant elements. This formulation preserves the main advantages of DBD, body-wise force evaluation, and efficient element-wise computations, thereby avoiding costly matrix decompositions. The proposed model represents both normal contact and tangential friction forces using spring–damper elements defined between dynamically generated virtual contact points, so that relative tangential displacement reflects slip-related motion. The friction coefficient is defined over the entire range of motion as a function of tangential displacement and is governed by physically measurable parameters: static and kinetic friction coefficients, presliding displacement, and critical displacement. Unlike conventional regularized Coulomb models that depend on relative velocity, the present formulation relies on relative displacement and remains continuous and differentiable, ensuring stable behavior at zero velocity and during sticking phases. The method is assessed in three representative case studies: a box on an inclined plane (stiction and frictional lag), a slider–rod interaction (jamming), and a spring-driven box on a plane (stick–slip). Results are compared with simulations performed in a commercial multibody dynamics solver that uses a velocity-dependent friction law. In these comparisons, the DBD-based model maintains perfect stiction when expected, reproduces presliding and a delayed build-up of sliding velocity consistent with a frictional-lag-type response, captures the onset of jamming in the slider–rod system, and generates sustained stick–slip cycles with clear stick intervals. An additional application-oriented cart–obstacle case study is included to demonstrate the sphere-to-sphere contact/friction formulation. Overall, the proposed approach provides a simple and computationally efficient tool for simulating friction-dominated multibody systems, and, while naturally aligned with DBD, its displacement-based friction formulation can be adapted for use within conventional multibody dynamics methods.

@article{d314cda889464ec59d7cc1fb692cef0d,
title = "Simulating Contact and Friction within the Discrete Body Dynamics Formalism",
abstract = "Contact and friction significantly influence the dynamics of mechanical systems. This study presents an approach for modeling contact and friction forces within the discrete body dynamics (DBD) framework, which solves the equations of motion as ordinary differential equations by replacing kinematic constraints with compliant elements. This formulation preserves the main advantages of DBD, body-wise force evaluation, and efficient element-wise computations, thereby avoiding costly matrix decompositions. The proposed model represents both normal contact and tangential friction forces using spring{\textendash}damper elements defined between dynamically generated virtual contact points, so that relative tangential displacement reflects slip-related motion. The friction coefficient is defined over the entire range of motion as a function of tangential displacement and is governed by physically measurable parameters: static and kinetic friction coefficients, presliding displacement, and critical displacement. Unlike conventional regularized Coulomb models that depend on relative velocity, the present formulation relies on relative displacement and remains continuous and differentiable, ensuring stable behavior at zero velocity and during sticking phases. The method is assessed in three representative case studies: a box on an inclined plane (stiction and frictional lag), a slider{\textendash}rod interaction (jamming), and a spring-driven box on a plane (stick{\textendash}slip). Results are compared with simulations performed in a commercial multibody dynamics solver that uses a velocity-dependent friction law. In these comparisons, the DBD-based model maintains perfect stiction when expected, reproduces presliding and a delayed build-up of sliding velocity consistent with a frictional-lag-type response, captures the onset of jamming in the slider{\textendash}rod system, and generates sustained stick{\textendash}slip cycles with clear stick intervals. An additional application-oriented cart{\textendash}obstacle case study is included to demonstrate the sphere-to-sphere contact/friction formulation. Overall, the proposed approach provides a simple and computationally efficient tool for simulating friction-dominated multibody systems, and, while naturally aligned with DBD, its displacement-based friction formulation can be adapted for use within conventional multibody dynamics methods.",
keywords = "Contact forces, Discrete body dynamics (DBD), Friction modeling, Multibody dynamics, Simulation, Stick-slip",
author = "Yaron Franco and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2026 American Society of Civil Engineers.",
year = "2026",
month = nov,
day = "1",
doi = "10.1061/JENMDT.EMENG-9093",
language = "אנגלית",
volume = "152",
journal = "Journal of Engineering Mechanics",
issn = "0733-9399",
publisher = "American Society of Civil Engineers (ASCE)",
number = "11",

}

Biomimicry at the Landscape Scale: Agent-Based Model Simulating Beaver-Inspired Construction

Oliva F, Kennedy J, Werfel J, Bar-Sinai KL, Degani A. Biomimicry at the Landscape Scale: Agent-Based Model Simulating Beaver-Inspired Construction. Biomimetics. 2026 Jul;11(7):515. [DOI] [Link to publication in Scopus]
 

Natural landscape morphology emerges from continuous, reciprocal interactions between biological agents and their physical environment. Despite its broad application across diverse scientific fields, agent-based modeling remains underexplored in the context of non-human geomorphological change. This paper presents a bio-inspired multi-agent framework to investigate how individual animal behaviors, specifically those of the North American beaver, shape adaptive landscapes. To capture dynamic task specialization, we introduce an architecture that abstracts alternating behavioral preferences into two operational states: Explorers (focused on resource identification) and Builders (focused on localized engineering). Deployed in a dynamic environment characterized by seasonal vegetation mean-reversion and a dynamic hydrological proxy, our targeted parameter sweeps and Monte Carlo replications demonstrate that decentralized stigmergic heuristics drive emergent spatial patterns. Quantitative metric analysis across varying colony sizes shows that while smaller swarms maintain a stable ecological equilibrium, larger populations trigger an apparent non-linear expansion of the hydrological network via active bank erosion. By establishing this foundational framework, this work provides an open-source tool to further explore non-human agency and regenerative strategies in landscape architecture and environmental design.

@article{aa00421bf13d4e96a853823ff1906dda,
title = "Biomimicry at the Landscape Scale: Agent-Based Model Simulating Beaver-Inspired Construction",
abstract = "Natural landscape morphology emerges from continuous, reciprocal interactions between biological agents and their physical environment. Despite its broad application across diverse scientific fields, agent-based modeling remains underexplored in the context of non-human geomorphological change. This paper presents a bio-inspired multi-agent framework to investigate how individual animal behaviors, specifically those of the North American beaver, shape adaptive landscapes. To capture dynamic task specialization, we introduce an architecture that abstracts alternating behavioral preferences into two operational states: Explorers (focused on resource identification) and Builders (focused on localized engineering). Deployed in a dynamic environment characterized by seasonal vegetation mean-reversion and a dynamic hydrological proxy, our targeted parameter sweeps and Monte Carlo replications demonstrate that decentralized stigmergic heuristics drive emergent spatial patterns. Quantitative metric analysis across varying colony sizes shows that while smaller swarms maintain a stable ecological equilibrium, larger populations trigger an apparent non-linear expansion of the hydrological network via active bank erosion. By establishing this foundational framework, this work provides an open-source tool to further explore non-human agency and regenerative strategies in landscape architecture and environmental design.",
keywords = "complex adaptive systems, ecological engineering, geomorphology, landscape architecture, multi-agent systems",
author = "Federico Oliva and Jordan Kennedy and Justin Werfel and Bar-Sinai, \{Karen Lee\} and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2026 by the authors.",
year = "2026",
month = jul,
doi = "10.3390/biomimetics11070515",
language = "אנגלית",
volume = "11",
journal = "Biomimetics",
issn = "2313-7673",
publisher = "Multidisciplinary Digital Publishing Institute (MDPI)",
number = "7",

}

Discrete Body Dynamics: A Numerical Method for Multibody Systems Investigated on Closed-Chain Problems

Franco Y, Degani A. Discrete Body Dynamics: A Numerical Method for Multibody Systems Investigated on Closed-Chain Problems. Applied Sciences (Switzerland). 2026 Mar;16(5):2297. [DOI] [Link to publication in Scopus]
 

Discrete Body Dynamics (DBD) is a recently developed approach for solving multibody dynamics problems that aims to improve the numerical treatment of systems with joint compliance. Conventional multibody formulations typically rely on kinematic constraints, which can increase numerical complexity and sensitivity, particularly in closed-chain systems. In this work, DBD is presented as a unified framework that combines a new modeling approach with a new numerical solution strategy. Mechanical joints are modeled explicitly using sets of springs and dampers, replacing ideal constraints and transforming the governing equations from a differential-algebraic system into a purely differential one. Based on this modeling framework, the numerical solution avoids global matrix operations and relies on element-wise computations, resulting in linear computational complexity with respect to the number of bodies. The numerical performance of the DBD method is investigated using a set of closed-chain benchmark systems, which are known to be challenging for conventional constraint-based solvers. The analysis examines the influence of joint stiffness, system dynamics, time-step selection, and mechanism topology on numerical stability, energy dissipation, and computational efficiency. The results show that DBD maintains robust and accurate solutions across the examined scenarios and exhibits a well-defined operating region with low numerical dissipation. Across the examined compliant-joint benchmarks, DBD shows the potential for up to three orders of magnitude lower energy drift at comparable simulation-time-to-real-world time (SRT), or up to about one order of magnitude higher SRT at comparable energy drift, relative to ADAMS/View. These findings indicate that DBD is well suited for the simulation of realistic multibody systems with compliant joints, including closed-chain configurations.

@article{8485ab2147f94dfb95633dbeff07f232,
title = "Discrete Body Dynamics: A Numerical Method for Multibody Systems Investigated on Closed-Chain Problems",
abstract = "Discrete Body Dynamics (DBD) is a recently developed approach for solving multibody dynamics problems that aims to improve the numerical treatment of systems with joint compliance. Conventional multibody formulations typically rely on kinematic constraints, which can increase numerical complexity and sensitivity, particularly in closed-chain systems. In this work, DBD is presented as a unified framework that combines a new modeling approach with a new numerical solution strategy. Mechanical joints are modeled explicitly using sets of springs and dampers, replacing ideal constraints and transforming the governing equations from a differential-algebraic system into a purely differential one. Based on this modeling framework, the numerical solution avoids global matrix operations and relies on element-wise computations, resulting in linear computational complexity with respect to the number of bodies. The numerical performance of the DBD method is investigated using a set of closed-chain benchmark systems, which are known to be challenging for conventional constraint-based solvers. The analysis examines the influence of joint stiffness, system dynamics, time-step selection, and mechanism topology on numerical stability, energy dissipation, and computational efficiency. The results show that DBD maintains robust and accurate solutions across the examined scenarios and exhibits a well-defined operating region with low numerical dissipation. Across the examined compliant-joint benchmarks, DBD shows the potential for up to three orders of magnitude lower energy drift at comparable simulation-time-to-real-world time (SRT), or up to about one order of magnitude higher SRT at comparable energy drift, relative to ADAMS/View. These findings indicate that DBD is well suited for the simulation of realistic multibody systems with compliant joints, including closed-chain configurations.",
keywords = "Discrete Body Dynamics, closed-chain systems, compliant joints, multibody dynamics, numerical methods, simulation",
author = "Yaron Franco and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2026 by the authors.",
year = "2026",
month = mar,
doi = "10.3390/app16052297",
language = "אנגלית",
volume = "16",
journal = "Applied Sciences (Switzerland)",
issn = "2076-3417",
publisher = "Multidisciplinary Digital Publishing Institute (MDPI)",
number = "5",

}

Designing like Beavers: A Multi‑Agent, Data‑Coupled Approach to Process‑First Landscape Design for Resilience

Kennedy JRM, Oliva F, Degani A, Bar-Sinai KL. Designing like Beavers: A Multi‑Agent, Data‑Coupled Approach to Process‑First Landscape Design for Resilience. Journal of Digital Landscape Architecture. 2026;(11):693-701. [DOI] [Link to publication in Scopus]
 

This paper presents a DEM-coupled multi-agent prototype that explores beaver-inspired trail formation and canalization as a process-first landscape design method. In NetLogo, the DEM provides slope/aspect fields, and water-tracer particles provide wetness cues during periodic reflooding. Agents generate trails as an intensity field via repeated movement, then excavate on wet cells, accumulating an excavation field that can deepen reinforced corridors into canals. The tool supports scenario comparison rather than prediction: users vary exploration bias, reinforcement/decay, excavation thresholds, slope limits, and reflooding timing, then assess corridor patterns in maps. In a representative case study, simulated trail-and-canal concentrations align with patterns in time-stamped imagery. Limitations include proxy hydrology and no terrain or hydraulic updating; future work couples excavation to flow and morphodynamics.

@article{93a364c95e164470aca8e7888b769b6d,
title = "Designing like Beavers: A Multi‑Agent, Data‑Coupled Approach to Process‑First Landscape Design for Resilience",
abstract = "This paper presents a DEM-coupled multi-agent prototype that explores beaver-inspired trail formation and canalization as a process-first landscape design method. In NetLogo, the DEM provides slope/aspect fields, and water-tracer particles provide wetness cues during periodic reflooding. Agents generate trails as an intensity field via repeated movement, then excavate on wet cells, accumulating an excavation field that can deepen reinforced corridors into canals. The tool supports scenario comparison rather than prediction: users vary exploration bias, reinforcement/decay, excavation thresholds, slope limits, and reflooding timing, then assess corridor patterns in maps. In a representative case study, simulated trail-and-canal concentrations align with patterns in time-stamped imagery. Limitations include proxy hydrology and no terrain or hydraulic updating; future work couples excavation to flow and morphodynamics.",
keywords = "Agent‑based modelling, DEM, NetLogo, beaver, canals, process-based design, trails",
author = "Kennedy, \{Jordan R.M.\} and Federico Oliva and Amir Degani and Bar-Sinai, \{Karen Lee\}",
note = "Publisher Copyright: {\textcopyright} Wichmann Verlag, VDE VERLAG GMBH.",
year = "2026",
doi = "10.14627/537770066",
language = "אנגלית",
pages = "693--701",
journal = "Journal of Digital Landscape Architecture",
issn = "2367-4253",
publisher = "V D E Verlag GmbH",
number = "11",

}

Trajectory based observer design: A framework for lightweight sensor fusion

Oliva F, Shaked T, Carnevale D, Degani A. Trajectory based observer design: A framework for lightweight sensor fusion. Control Engineering Practice. 2025 Dec;165:106592. [DOI] [Link to publication in Scopus]
 

Efficient observer design and accurate sensor fusion are key in state estimation. This work proposes an optimization-based methodology, termed Trajectory Based Optimization Design (TBOD), allowing the user to easily design observers for general nonlinear systems and multi-sensor setups. Starting from parametrized observer dynamics, the proposed method considers a finite set of pre-recorded measurement trajectories from the nominal plant and exploits them to tune the observer parameters through numerical optimization. This research hinges on the classic observer's theory and Moving Horizon Estimators methodology. Optimization is exploited to ease the observer's design, providing the user with a lightweight, general-purpose sensor fusion methodology. TBOD's main characteristics are the capability to handle general sensors efficiently and in a modular way and, most importantly, its straightforward tuning procedure. The TBOD's performance is tested on a terrestrial rover localization problem, combining IMU and ranging sensors provided by Ultra Wide Band antennas, and validated through a motion-capture system. Comparison with an Extended Kalman Filter is also provided, matching its position estimation accuracy and significantly improving in the orientation.

@article{83b7510877554cd7a62ad68cad78ece7,
title = "Trajectory based observer design: A framework for lightweight sensor fusion",
abstract = "Efficient observer design and accurate sensor fusion are key in state estimation. This work proposes an optimization-based methodology, termed Trajectory Based Optimization Design (TBOD), allowing the user to easily design observers for general nonlinear systems and multi-sensor setups. Starting from parametrized observer dynamics, the proposed method considers a finite set of pre-recorded measurement trajectories from the nominal plant and exploits them to tune the observer parameters through numerical optimization. This research hinges on the classic observer's theory and Moving Horizon Estimators methodology. Optimization is exploited to ease the observer's design, providing the user with a lightweight, general-purpose sensor fusion methodology. TBOD's main characteristics are the capability to handle general sensors efficiently and in a modular way and, most importantly, its straightforward tuning procedure. The TBOD's performance is tested on a terrestrial rover localization problem, combining IMU and ranging sensors provided by Ultra Wide Band antennas, and validated through a motion-capture system. Comparison with an Extended Kalman Filter is also provided, matching its position estimation accuracy and significantly improving in the orientation.",
keywords = "Estimation based on sensor data, Optimization, Robotics and automation, Sensor data fusion",
author = "Federico Oliva and Tom Shaked and Daniele Carnevale and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2025 The Authors",
year = "2025",
month = dec,
doi = "10.1016/j.conengprac.2025.106592",
language = "אנגלית",
volume = "165",
journal = "Control Engineering Practice",
issn = "0967-0661",
publisher = "Elsevier Ltd.",

}

Multi-Agent target allocation and safe trajectory planning for artificial pollination tasks

Manasherov O, Degani A. Multi-Agent target allocation and safe trajectory planning for artificial pollination tasks. Smart Agricultural Technology. 2024 Aug;8:100461. [DOI] [Link to publication in Scopus]
 

This paper presents an autonomous multi-agent drone system utilized for an artificial pollination task to address the declining bee population and its impact on natural pollination. The main goal is to visit all the targets (flowers) by drones. The system receives the position of the targets located on a vertical fruiting wall from a single sensor mounted on an unmanned ground vehicle (UGV). Then, it determines the sequence of target allocation to minimize the task time and to minimize the accumulated distance each drone travels. The limited payload capacity of each drone and the need to refill stock carried by the UGV are also considered. After allocating the targets, a safe trajectory is generated for each drone to avoid collision with other drones, considering uncertainty in the drones’ positions. When a drone reaches a target, the system allocates a new target, and the cycle repeats until the task is completed. The system is reactive to the evolution of the task and adjusts accordingly. An additional tested factor is the impact of the positioning error on the task time. The system was evaluated through dynamic simulations using real datasets of peach and pear orchards and finally in a laboratory proof-of-concept experiment using a micro-drone system.

@article{7cbd693626a349b2ad13e084a93388bb,
title = "Multi-Agent target allocation and safe trajectory planning for artificial pollination tasks",
abstract = "This paper presents an autonomous multi-agent drone system utilized for an artificial pollination task to address the declining bee population and its impact on natural pollination. The main goal is to visit all the targets (flowers) by drones. The system receives the position of the targets located on a vertical fruiting wall from a single sensor mounted on an unmanned ground vehicle (UGV). Then, it determines the sequence of target allocation to minimize the task time and to minimize the accumulated distance each drone travels. The limited payload capacity of each drone and the need to refill stock carried by the UGV are also considered. After allocating the targets, a safe trajectory is generated for each drone to avoid collision with other drones, considering uncertainty in the drones{\textquoteright} positions. When a drone reaches a target, the system allocates a new target, and the cycle repeats until the task is completed. The system is reactive to the evolution of the task and adjusts accordingly. An additional tested factor is the impact of the positioning error on the task time. The system was evaluated through dynamic simulations using real datasets of peach and pear orchards and finally in a laboratory proof-of-concept experiment using a micro-drone system.",
keywords = "Agricultural automation, Artificial pollination, Multi-agent task allocation, Multi-robot systems, Task and motion planning",
author = "Ori Manasherov and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2024",
year = "2024",
month = aug,
doi = "10.1016/j.atech.2024.100461",
language = "אנגלית",
volume = "8",
journal = "Smart Agricultural Technology",
issn = "2772-3755",
publisher = "Elsevier B.V.",

}

Online as-Built Building Information Model Update for Robotic Monitoring in Construction Sites

Spinner A, Degani A. Online as-Built Building Information Model Update for Robotic Monitoring in Construction Sites. Journal of Intelligent and Robotic Systems: Theory and Applications. 2024 Jun;110(2):50. [DOI] [Link to publication in Scopus]
 

Today, automated techniques for the update of as-built Building Information Models (BIM) make use of offline algorithms restricting the update frequency to an extent where continuous monitoring becomes nearly impossible. To address this problem, we propose a new method for robotic monitoring that updates an as-built BIM in real-time by solving a Simultaneous Localization and Mapping (SLAM) problem where the map is represented as a collection of elements from the as-planned BIM. The suggested approach is based on the Rao-Blackwellized Particle Filter (RBPF) which enables explicit injection of prior knowledge from the building’s construction schedule, i.e., from a 4D BIM, or its elements’ spatial relations. In the methods section we describe the benefits of using an exact inverse sensor model that provides a measure for the existence probability of elements while considering the entire probabilistic existence belief map. We continue by outlining robustification techniques that include both geometrical and temporal dimensions and present how we account for common pose and shape mistakes in constructed elements. Additionally, we show that our method reduces to the standard Monte Carlo Localization (MCL) in known areas. We conclude by presenting simulation results of the proposed method and comparing it to adjacent alternatives.

@article{c61a0db949254aa8add9db25e8f85e0f,
title = "Online as-Built Building Information Model Update for Robotic Monitoring in Construction Sites",
abstract = "Today, automated techniques for the update of as-built Building Information Models (BIM) make use of offline algorithms restricting the update frequency to an extent where continuous monitoring becomes nearly impossible. To address this problem, we propose a new method for robotic monitoring that updates an as-built BIM in real-time by solving a Simultaneous Localization and Mapping (SLAM) problem where the map is represented as a collection of elements from the as-planned BIM. The suggested approach is based on the Rao-Blackwellized Particle Filter (RBPF) which enables explicit injection of prior knowledge from the building{\textquoteright}s construction schedule, i.e., from a 4D BIM, or its elements{\textquoteright} spatial relations. In the methods section we describe the benefits of using an exact inverse sensor model that provides a measure for the existence probability of elements while considering the entire probabilistic existence belief map. We continue by outlining robustification techniques that include both geometrical and temporal dimensions and present how we account for common pose and shape mistakes in constructed elements. Additionally, we show that our method reduces to the standard Monte Carlo Localization (MCL) in known areas. We conclude by presenting simulation results of the proposed method and comparing it to adjacent alternatives.",
keywords = "Bayesian estimation, Building information model, Rao-Blackwellized particle filter, Robotics in construction, Sensor inverse model, Simultaneous localization and mapping",
author = "Alon Spinner and Amir Degani",
note = "Publisher Copyright: {\textcopyright} The Author(s) 2024.",
year = "2024",
month = jun,
doi = "10.1007/s10846-024-02087-2",
language = "אנגלית",
volume = "110",
journal = "Journal of Intelligent and Robotic Systems: Theory and Applications",
issn = "0921-0296",
publisher = "Springer Nature",
number = "2",

}

Modeling of rigid-link and compliant joint manipulator using the discrete body dynamics method

Franco Y, Degani A. Modeling of rigid-link and compliant joint manipulator using the discrete body dynamics method. Multibody System Dynamics. 2024 May;61(1):1-18. [DOI] [Link to publication in Scopus]
 

Recently, there has been a growing interest in robots with compliant elements. The commonly used methods for modeling their dynamics are multibody dynamics (MBD), recursive algorithms, impulse-based, and Lagrangian formulation. However, the latter method requires a new derivation for each change made to the system, and modeling compliant elements with it can be challenging. To solve complex systems that include compliant elements, a numerical method is necessary. Whereas some methods provide accurate solutions but have high complexity (e.g., MBD), others are quick but inaccurate (e.g., impulse-based). In this paper, we propose a new method, discrete body dynamics (DBD), which offers quick solutions with high accuracy, especially for systems with compliant elements. The method uses springs and dampers to model joints instead of constraints such as a revolute joint and has a complexity of O(n). We demonstrate the proposed method using single- and three-link manipulators with compliant joints and compare the results to those of ADAMS (a commercial MBD-based program) and the Lagrangian formulation. Our results show that the DBD method well matches with the Lagrangian formulation and is more accurate than the MBD for both compliant and rigid joints.

@article{d69fd87ff5794212ac9adafb89fe0f54,
title = "Modeling of rigid-link and compliant joint manipulator using the discrete body dynamics method",
abstract = "Recently, there has been a growing interest in robots with compliant elements. The commonly used methods for modeling their dynamics are multibody dynamics (MBD), recursive algorithms, impulse-based, and Lagrangian formulation. However, the latter method requires a new derivation for each change made to the system, and modeling compliant elements with it can be challenging. To solve complex systems that include compliant elements, a numerical method is necessary. Whereas some methods provide accurate solutions but have high complexity (e.g., MBD), others are quick but inaccurate (e.g., impulse-based). In this paper, we propose a new method, discrete body dynamics (DBD), which offers quick solutions with high accuracy, especially for systems with compliant elements. The method uses springs and dampers to model joints instead of constraints such as a revolute joint and has a complexity of O(n). We demonstrate the proposed method using single- and three-link manipulators with compliant joints and compare the results to those of ADAMS (a commercial MBD-based program) and the Lagrangian formulation. Our results show that the DBD method well matches with the Lagrangian formulation and is more accurate than the MBD for both compliant and rigid joints.",
keywords = "Discrete body dynamics, Manipulator, Multibody dynamics, Robotics, Simulation",
author = "Yaron Franco and Amir Degani",
note = "Publisher Copyright: {\textcopyright} The Author(s), under exclusive licence to Springer Nature B.V. 2023.",
year = "2024",
month = may,
doi = "10.1007/s11044-023-09897-6",
language = "אנגלית",
volume = "61",
pages = "1--18",
journal = "Multibody System Dynamics",
issn = "1384-5640",
publisher = "Springer Netherlands",
number = "1",

}

Interacting with Obstacles Using a Bio-Inspired, Flexible, Underactuated Multilink Manipulator

Prigozin A, Degani A. Interacting with Obstacles Using a Bio-Inspired, Flexible, Underactuated Multilink Manipulator. Biomimetics. 2024 Feb;9(2):86. [DOI] [Link to publication in Scopus]
 

With the increasing demand for robotic manipulators to operate in complex environments, it is important to develop designs that work in obstacle-rich environments and can navigate around obstacles. This paper aims to demonstrate the capabilities of a bio-inspired, underactuated multilink manipulator in environments with fixed and/or movable obstacles. To simplify the system design, a single rotational actuator is used at the base of the manipulator. We present a modeling method for flexible, multilink underactuated manipulators, including their interaction with obstacles. We also demonstrate how to plan a trajectory for the manipulator in environments with fixed obstacles. The robustness of the manipulator is examined by analyzing the effects of uncertainty in its initial state and the position of obstacles. Next, we demonstrate the performance of the manipulator in environments with movable obstacles and show the advantages of controlling the obstacles’ radii and positions. Lastly, we showcase the process of picking up an object in workspaces with obstacles. All the findings are supported by simulations as well as hardware experiments.

@article{fde5e550e7814bee9d25a1f368279554,
title = "Interacting with Obstacles Using a Bio-Inspired, Flexible, Underactuated Multilink Manipulator",
abstract = "With the increasing demand for robotic manipulators to operate in complex environments, it is important to develop designs that work in obstacle-rich environments and can navigate around obstacles. This paper aims to demonstrate the capabilities of a bio-inspired, underactuated multilink manipulator in environments with fixed and/or movable obstacles. To simplify the system design, a single rotational actuator is used at the base of the manipulator. We present a modeling method for flexible, multilink underactuated manipulators, including their interaction with obstacles. We also demonstrate how to plan a trajectory for the manipulator in environments with fixed obstacles. The robustness of the manipulator is examined by analyzing the effects of uncertainty in its initial state and the position of obstacles. Next, we demonstrate the performance of the manipulator in environments with movable obstacles and show the advantages of controlling the obstacles{\textquoteright} radii and positions. Lastly, we showcase the process of picking up an object in workspaces with obstacles. All the findings are supported by simulations as well as hardware experiments.",
keywords = "bioinspired and biomimetic robotics, robot manipulation, robotics, soft robots",
author = "Amit Prigozin and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2024 by the authors.",
year = "2024",
month = feb,
doi = "10.3390/biomimetics9020086",
language = "אנגלית",
volume = "9",
journal = "Biomimetics",
issn = "2313-7673",
publisher = "Multidisciplinary Digital Publishing Institute (MDPI)",
number = "2",

}

OS-BREEZE: Oil Spills Boundary Red Emission Zone Estimation Using Unmanned Surface Vehicles

Elmakis O, Polinov S, Shaked T, Gordon G, Degani A. OS-BREEZE: Oil Spills Boundary Red Emission Zone Estimation Using Unmanned Surface Vehicles. Sensors. 2024 Jan;24(2):703. [DOI] [Link to publication in Scopus]
 

Maritime transport, responsible for delivering over eighty percent of the world’s goods, is the backbone of the global delivery industry. However, it also presents considerable environmental risks, particularly regarding aquatic contamination. Nearly ninety percent of marine oil spills near shores are attributed to human activities, highlighting the urgent need for continuous and effective surveillance. To address this pressing issue, this paper introduces a novel technique named OS-BREEZE. This method employs an Unmanned Surface Vehicle (USV) for assessing the extent of oil pollution on the sea surface. The OS-BREEZE algorithm directs the USV along the spill edge, facilitating rapid and accurate assessment of the contaminated area. The key contribution of this paper is the development of this novel approach for monitoring and managing marine pollution, which significantly reduces the path length required for mapping and estimating the size of the contaminated area. Furthermore, this paper presents a scale model experiment executed at the Coastal and Marine Engineering Research Institute (CAMERI). This experiment demonstrated the method’s enhanced speed and efficiency compared to traditional monitoring techniques. The experiment was methodically conducted across four distinct scenarios: the initial and advanced stages of an oil spill at the outer anchoring, as well as scenarios at the inner docking on both the stern and port sides.

@article{be967214d6cd4a8da1fa43e0985d8442,
title = "OS-BREEZE: Oil Spills Boundary Red Emission Zone Estimation Using Unmanned Surface Vehicles",
abstract = "Maritime transport, responsible for delivering over eighty percent of the world{\textquoteright}s goods, is the backbone of the global delivery industry. However, it also presents considerable environmental risks, particularly regarding aquatic contamination. Nearly ninety percent of marine oil spills near shores are attributed to human activities, highlighting the urgent need for continuous and effective surveillance. To address this pressing issue, this paper introduces a novel technique named OS-BREEZE. This method employs an Unmanned Surface Vehicle (USV) for assessing the extent of oil pollution on the sea surface. The OS-BREEZE algorithm directs the USV along the spill edge, facilitating rapid and accurate assessment of the contaminated area. The key contribution of this paper is the development of this novel approach for monitoring and managing marine pollution, which significantly reduces the path length required for mapping and estimating the size of the contaminated area. Furthermore, this paper presents a scale model experiment executed at the Coastal and Marine Engineering Research Institute (CAMERI). This experiment demonstrated the method{\textquoteright}s enhanced speed and efficiency compared to traditional monitoring techniques. The experiment was methodically conducted across four distinct scenarios: the initial and advanced stages of an oil spill at the outer anchoring, as well as scenarios at the inner docking on both the stern and port sides.",
keywords = "catastrophic event, environmental monitoring, marine pollution, oil spill mapping, remote sensing, unmanned surface vehicles",
author = "Oren Elmakis and Semion Polinov and Tom Shaked and Gabi Gordon and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2024 by the authors.",
year = "2024",
month = jan,
doi = "10.3390/s24020703",
language = "אנגלית",
volume = "24",
journal = "Sensors",
issn = "1424-8220",
publisher = "Multidisciplinary Digital Publishing Institute (MDPI)",
number = "2",

}

Synthetic image data generation using BIM and computer graphics for building scene understanding

Ying H, Sacks R, Degani A. Synthetic image data generation using BIM and computer graphics for building scene understanding. Automation in Construction. 2023 Oct;154:105016. [DOI] [Link to publication in Scopus]
 

Vision-based building scene understanding (BSU) is essential to many applications such as indoor navigation and 3D reconstruction. Deep learning excels in various BSU tasks but its training relies heavily on large-scale datasets, which are often burdensome and costly to obtain. This study proposes a universal and automated approach to generate synthetic building images with comprehensive annotations that support twelve BSU tasks, including camera pose estimation, scene recognition, depth estimation, 2D/3D object and object part detection, object and material semantic segmentation, object and object part instance segmentation, and panoptic segmentation. This approach captures and renders perspective views of indoor BIM model scenes to generate photorealistic images. Required annotations are computed by a ray tracing-based algorithm accelerated by two-tier axis-aligned bounding box tree indexing. The approach was validated by efficiently producing annotated synthetic images from various BIM models, and preliminary experiments demonstrated the promising efficacy of the synthetic images for deep learning model training.

@article{2a92ebd7ec5349b7b6abca6b4d9e4744,
title = "Synthetic image data generation using BIM and computer graphics for building scene understanding",
abstract = "Vision-based building scene understanding (BSU) is essential to many applications such as indoor navigation and 3D reconstruction. Deep learning excels in various BSU tasks but its training relies heavily on large-scale datasets, which are often burdensome and costly to obtain. This study proposes a universal and automated approach to generate synthetic building images with comprehensive annotations that support twelve BSU tasks, including camera pose estimation, scene recognition, depth estimation, 2D/3D object and object part detection, object and material semantic segmentation, object and object part instance segmentation, and panoptic segmentation. This approach captures and renders perspective views of indoor BIM model scenes to generate photorealistic images. Required annotations are computed by a ray tracing-based algorithm accelerated by two-tier axis-aligned bounding box tree indexing. The approach was validated by efficiently producing annotated synthetic images from various BIM models, and preliminary experiments demonstrated the promising efficacy of the synthetic images for deep learning model training.",
keywords = "Automatic annotation, Building information modeling (BIM), Building scene understanding, Deep learning, Synthetic image generation",
author = "Huaquan Ying and Rafael Sacks and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2023",
year = "2023",
month = oct,
doi = "10.1016/j.autcon.2023.105016",
language = "אנגלית",
volume = "154",
journal = "Automation in Construction",
issn = "0926-5805",
publisher = "Elsevier B.V.",

}

Aggregate-Forming Planner for Autonomous Earth-Moving

Shaked T, Bar-Sinai KL, Meles-Braverman A, Elmakis O, Degani A. Aggregate-Forming Planner for Autonomous Earth-Moving. IEEE Access. 2023;11:118841-118848. [DOI] [Link to publication in Scopus]
 

Research in advanced construction and autonomous earthworks begins to explore the shaping of aggregates for construction, military, and environmental purposes. However, while current work in autonomous earthworks focuses on grading and pushing aggregates, there is limited research on moving aggregates to form specific shapes on a surface. This action can aid in gathering aggregates for on- site construction of re- configurable formations, performing architectural tasks, or piling material reservoirs for concrete production. To support aggregate-forming, an autonomous agent is required to move non-labeled aggregates from multiple locations to numerous proximate target points in a predefined desired shape. In this process, the agent needs to push the aggregates, handle material spills, and update both the material location and the outcome formation. The paper presents a planner for autonomous aggregate shaping to support this task. The path generation is first demonstrated in a simulation environment and validated in an in- lab experimental setup, showing over 90% success rate. The results show that employing the planner can assist in advancing autonomous earthworks toward on- site aggregate-forming.

@article{c229a958b43945c787583e1a2475dd96,
title = "Aggregate-Forming Planner for Autonomous Earth-Moving",
abstract = "Research in advanced construction and autonomous earthworks begins to explore the shaping of aggregates for construction, military, and environmental purposes. However, while current work in autonomous earthworks focuses on grading and pushing aggregates, there is limited research on moving aggregates to form specific shapes on a surface. This action can aid in gathering aggregates for on- site construction of re- configurable formations, performing architectural tasks, or piling material reservoirs for concrete production. To support aggregate-forming, an autonomous agent is required to move non-labeled aggregates from multiple locations to numerous proximate target points in a predefined desired shape. In this process, the agent needs to push the aggregates, handle material spills, and update both the material location and the outcome formation. The paper presents a planner for autonomous aggregate shaping to support this task. The path generation is first demonstrated in a simulation environment and validated in an in- lab experimental setup, showing over 90\% success rate. The results show that employing the planner can assist in advancing autonomous earthworks toward on- site aggregate-forming.",
keywords = "Advanced construction, autonomous earthworks, path planning, robotics and automation",
author = "Tom Shaked and Bar-Sinai, \{Karen Lee\} and Ari Meles-Braverman and Oren Elmakis and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2013 IEEE.",
year = "2023",
doi = "10.1109/ACCESS.2023.3327112",
language = "אנגלית",
volume = "11",
pages = "118841--118848",
journal = "IEEE Access",
issn = "2169-3536",
publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

USV Port Oil Spill Cleanup Using Hybrid Multi-Destination RL-CPP

Elmakis O, Degani A. USV Port Oil Spill Cleanup Using Hybrid Multi-Destination RL-CPP. IEEE Access. 2023;11:122722-122735. [DOI] [Link to publication in Scopus]
 

Human activities are the principal contributors to oil pollution in marine ecosystems, thereby causing severe ecological damage. The high volume of vessel traffic operating in these areas contributes to the rapid contamination of the marine ecosystem, leading to frequent oil spill events, particularly near ports where congestion is prevalent. Addressing this issue today necessitates the involvement of numerous skilled personnel committed to the task. This team undertakes the repetitive and tedious work of surveying the area, detecting spills, and employing various techniques to address each oil slick. The emergence of Unmanned Surface Vehicle (USV) technology has introduced a promising alternative capable of alleviating the process of continuous monitoring and cleaning operations in proximal shoreline areas. This paper addresses the problem of USV cleaning operations near the port. The proposed method synthesizes a hierarchical architecture that integrates traditional global path planning for multi-destination oil spills, along with coverage path planning based on reinforcement learning, to adapt to dynamically changing oil spills. This combined architecture results in a comprehensive solution, allowing navigation within the port's vicinity to address each occurrence of oil pollution. To evaluate the effectiveness of this approach, we conducted an elaborate simulation designed to replicate port activities. The findings of this paper indicate a significant reduction in pollution levels due to USV operation and underscore the ability to acquire complex policies for dynamic coverage planning through the use of a reinforcement learning framework.

@article{f438616b2430435e9c37b25c2cfaabad,
title = "USV Port Oil Spill Cleanup Using Hybrid Multi-Destination RL-CPP",
abstract = "Human activities are the principal contributors to oil pollution in marine ecosystems, thereby causing severe ecological damage. The high volume of vessel traffic operating in these areas contributes to the rapid contamination of the marine ecosystem, leading to frequent oil spill events, particularly near ports where congestion is prevalent. Addressing this issue today necessitates the involvement of numerous skilled personnel committed to the task. This team undertakes the repetitive and tedious work of surveying the area, detecting spills, and employing various techniques to address each oil slick. The emergence of Unmanned Surface Vehicle (USV) technology has introduced a promising alternative capable of alleviating the process of continuous monitoring and cleaning operations in proximal shoreline areas. This paper addresses the problem of USV cleaning operations near the port. The proposed method synthesizes a hierarchical architecture that integrates traditional global path planning for multi-destination oil spills, along with coverage path planning based on reinforcement learning, to adapt to dynamically changing oil spills. This combined architecture results in a comprehensive solution, allowing navigation within the port's vicinity to address each occurrence of oil pollution. To evaluate the effectiveness of this approach, we conducted an elaborate simulation designed to replicate port activities. The findings of this paper indicate a significant reduction in pollution levels due to USV operation and underscore the ability to acquire complex policies for dynamic coverage planning through the use of a reinforcement learning framework.",
keywords = "Autonomous agents, marine navigation, oil pollution, path planning, reinforcement learning",
author = "Oren Elmakis and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2013 IEEE.",
year = "2023",
doi = "10.1109/ACCESS.2023.3327559",
language = "אנגלית",
volume = "11",
pages = "122722--122735",
journal = "IEEE Access",
issn = "2169-3536",
publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

Optimizing and designing a leg shape to increase robustness of a running robot on rough terrain

Gaathon A, Degani A. Optimizing and designing a leg shape to increase robustness of a running robot on rough terrain. Bioinspiration and Biomimetics. 2022 Nov 1;17(6):066022. [DOI] [Link to publication in Scopus]
 

The superior ability of dynamic legged locomotion in traversing rough terrain relative to wheeled or tracked mechanisms comes with the cost of fragile stability. Simple control methods that use only a few basic detection sensors and apply a single controller help robots keep their balance when traversing unforeseen rough terrain. Exploiting multiple controllers simultaneously, such as the free leg length and stiffness in our hopping monopod, can further improve robustness but is often mechanically hard to implement. This work demonstrates that a curved leg shape can improve the robustness of a robot to perturbations in both terrain levels and initial horizontal velocity without complicating the control scheme. Our work develops spring loaded inverted pendulum (SLIP) based models that manifest the coupling of the leg’s parameters and capture the rolling motion. We use these models to find an optimal combination of parameters that maximizes a measure for long-term stability−reaching a desired relative height above terrain. We demonstrate that when traversing unknown rough terrain, such optimal coupling can increase robustness to perturbations in the initial horizontal velocity by 93% relative to the optimal conventional SLIP model. We further demonstrate our results in experiments.

@article{19b09e6f033b4f2890d97ebdb4898a46,
title = "Optimizing and designing a leg shape to increase robustness of a running robot on rough terrain",
abstract = "The superior ability of dynamic legged locomotion in traversing rough terrain relative to wheeled or tracked mechanisms comes with the cost of fragile stability. Simple control methods that use only a few basic detection sensors and apply a single controller help robots keep their balance when traversing unforeseen rough terrain. Exploiting multiple controllers simultaneously, such as the free leg length and stiffness in our hopping monopod, can further improve robustness but is often mechanically hard to implement. This work demonstrates that a curved leg shape can improve the robustness of a robot to perturbations in both terrain levels and initial horizontal velocity without complicating the control scheme. Our work develops spring loaded inverted pendulum (SLIP) based models that manifest the coupling of the leg{\textquoteright}s parameters and capture the rolling motion. We use these models to find an optimal combination of parameters that maximizes a measure for long-term stability−reaching a desired relative height above terrain. We demonstrate that when traversing unknown rough terrain, such optimal coupling can increase robustness to perturbations in the initial horizontal velocity by 93\% relative to the optimal conventional SLIP model. We further demonstrate our results in experiments.",
keywords = "bio-inspired robots, dynamic robots, leg design, legged robots, minimalistic control, SLIP-based robots, variable stiffness",
author = "Adar Gaathon and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2022 IOP Publishing Ltd.",
year = "2022",
month = nov,
day = "1",
doi = "10.1088/1748-3190/ac9cb1",
language = "אנגלית",
volume = "17",
journal = "Bioinspiration and Biomimetics",
issn = "1748-3182",
publisher = "Institute of Physics",
number = "6",

}

BREEZE—Boundary Red Emission Zone Estimation Using Unmanned Aerial Vehicles

Elmakis O, Shaked T, Fishbain B, Degani A. BREEZE—Boundary Red Emission Zone Estimation Using Unmanned Aerial Vehicles. Sensors. 2022 Jul;22(14):5460. [DOI] [Link to publication in Scopus]
 

Catastrophic gas leak events require human First Responder Teams (FRTs) to map hazardous areas (red zones). The initial task of FRT in such events is to assess the risk according to the pollution level and to quickly evacuate civilians to prevent casualties. These teams risk their lives by manually mapping the gas dispersion. This process is currently performed using hand-held gas detectors and requires dense and exhaustive monitoring to achieve reliable maps. However, the conventional mapping process is impaired due to limited human mobility and monitoring capacities. In this context, this paper presents a method for gas sensing using unmanned aerial vehicles. The research focuses on developing a custom path planner—Boundary Red Emission Zone Estimation (BREEZE). BREEZE is an estimation approach that allows efficient red zone delineation by following its boundary. The presented approach improves the gas dispersion mapping process by performing adaptive path planning, monitoring gas dispersion in real time, and analyzing the measurements online. This approach was examined by simulating a cluttered urban site in different environmental conditions. The simulation results show the ability to autonomously perform red zone estimation faster than methods that rely on predetermined paths and with a precision higher than ninety percent.

@article{59deb8ce9a914febb51807a240f5cbf2,
title = "BREEZE{\textemdash}Boundary Red Emission Zone Estimation Using Unmanned Aerial Vehicles",
abstract = "Catastrophic gas leak events require human First Responder Teams (FRTs) to map hazardous areas (red zones). The initial task of FRT in such events is to assess the risk according to the pollution level and to quickly evacuate civilians to prevent casualties. These teams risk their lives by manually mapping the gas dispersion. This process is currently performed using hand-held gas detectors and requires dense and exhaustive monitoring to achieve reliable maps. However, the conventional mapping process is impaired due to limited human mobility and monitoring capacities. In this context, this paper presents a method for gas sensing using unmanned aerial vehicles. The research focuses on developing a custom path planner{\textemdash}Boundary Red Emission Zone Estimation (BREEZE). BREEZE is an estimation approach that allows efficient red zone delineation by following its boundary. The presented approach improves the gas dispersion mapping process by performing adaptive path planning, monitoring gas dispersion in real time, and analyzing the measurements online. This approach was examined by simulating a cluttered urban site in different environmental conditions. The simulation results show the ability to autonomously perform red zone estimation faster than methods that rely on predetermined paths and with a precision higher than ninety percent.",
keywords = "air pollution, catastrophic event, chemical leakage, gas mapping, unmanned aerial vehicles",
author = "Oren Elmakis and Tom Shaked and Barak Fishbain and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2022 by the authors.",
year = "2022",
month = jul,
doi = "10.3390/s22145460",
language = "אנגלית",
volume = "22",
journal = "Sensors",
issn = "1424-8220",
publisher = "Multidisciplinary Digital Publishing Institute (MDPI)",
number = "14",

}

A two-stage recursive ray tracing algorithm to automatically identify external building objects in building information models

Ying H, Zhou H, Degani A, Sacks R. A two-stage recursive ray tracing algorithm to automatically identify external building objects in building information models. Computer-Aided Civil and Infrastructure Engineering. 2022 Jul 1;37(8):991-1009. [DOI] [Link to publication in Scopus]
 

The internal or external attribute of building information modeling (BIM) objects is vital information for many BIM-based engineering analyses such as building energy analysis and cost estimation. Unfortunately, such information is often inaccurate, incomplete, or missing entirely in most BIM models. Manually checking, correcting, or inputting this data for large-scale BIM models can be time-consuming, laborious, and error-prone. This study proposes a two-stage ray tracing algorithm to automatically identify external BIM objects, based on the idea that external objects of a building can be viewed from somewhere outside the building. The first-stage ray tracing samples viewpoints from the six faces of an offset axis-aligned bounding box (AABB) of the building and emits a ray for each viewpoint to detect relevant external objects. The second-stage ray tracing recursively searches for any remaining external objects from the view of the external objects that have been detected in the previous round of ray tracing. Both stages are carefully designed for efficiency. Furthermore, a two-tier AABB tree is introduced to spatially index building objects on both model and object levels to accelerate relevant geometry operations. The proposed algorithm is validated with one synthetic and two large-scale real-world building models. The results show that all the external objects in the three models are accurately and efficiently identified, and the two-tier spatial indexing and other acceleration techniques improve the algorithm's efficiency significantly.

@article{6a2881d8fab841c5b0045396a0791e33,
title = "A two-stage recursive ray tracing algorithm to automatically identify external building objects in building information models",
abstract = "The internal or external attribute of building information modeling (BIM) objects is vital information for many BIM-based engineering analyses such as building energy analysis and cost estimation. Unfortunately, such information is often inaccurate, incomplete, or missing entirely in most BIM models. Manually checking, correcting, or inputting this data for large-scale BIM models can be time-consuming, laborious, and error-prone. This study proposes a two-stage ray tracing algorithm to automatically identify external BIM objects, based on the idea that external objects of a building can be viewed from somewhere outside the building. The first-stage ray tracing samples viewpoints from the six faces of an offset axis-aligned bounding box (AABB) of the building and emits a ray for each viewpoint to detect relevant external objects. The second-stage ray tracing recursively searches for any remaining external objects from the view of the external objects that have been detected in the previous round of ray tracing. Both stages are carefully designed for efficiency. Furthermore, a two-tier AABB tree is introduced to spatially index building objects on both model and object levels to accelerate relevant geometry operations. The proposed algorithm is validated with one synthetic and two large-scale real-world building models. The results show that all the external objects in the three models are accurately and efficiently identified, and the two-tier spatial indexing and other acceleration techniques improve the algorithm's efficiency significantly.",
author = "Huaquan Ying and Hui Zhou and Amir Degani and Rafael Sacks",
note = "Publisher Copyright: {\textcopyright} 2021 Computer-Aided Civil and Infrastructure Engineering.",
year = "2022",
month = jul,
day = "1",
doi = "10.1111/mice.12776",
language = "אנגלית",
volume = "37",
pages = "991--1009",
journal = "Computer-Aided Civil and Infrastructure Engineering",
issn = "1093-9687",
publisher = "Elsevier Inc.",
number = "8",

}

Mathematical Estimation of Particulate Air Pollution Levels by Aerosols Tomography

Vernik O, Degani A, Fishbain B. Mathematical Estimation of Particulate Air Pollution Levels by Aerosols Tomography. IEEE Sensors Journal. 2022 May 1;22(9):8274-8281. [DOI] [Link to publication in Scopus]
 

Air pollution control and mitigation are important factors in wellbeing and sustainability. To this end, air pollution monitoring has a significant role. Today, air pollution monitoring is mainly done by standardized stations. The spread of those stations is sparse and their cost hinders the option of adding more. Thus, arises the need for cheaper and available means to assess air pollution. In this article, a mathematical method to solve the inverse problem of aerosols tomography is proposed. The suggested method applies filtered back-projection method on a pixel-wise blur estimation. Using the method, particles' concentrations in a 3D space is reconstructed from photos taken from different angles. The proposed method is shown to be very effective for assessing air pollution levels by means of multi angle imaging. Specifically, estimating images' blur as an indication for Particulate Matter (PM) ambient levels. The results of the research point towards strong correlation between image blur and pollution level in the medium and the ability to reconstruct the aerosols distribution in space.

@article{725f60fa160e4ff5a4e40ecfe9230974,
title = "Mathematical Estimation of Particulate Air Pollution Levels by Aerosols Tomography",
abstract = "Air pollution control and mitigation are important factors in wellbeing and sustainability. To this end, air pollution monitoring has a significant role. Today, air pollution monitoring is mainly done by standardized stations. The spread of those stations is sparse and their cost hinders the option of adding more. Thus, arises the need for cheaper and available means to assess air pollution. In this article, a mathematical method to solve the inverse problem of aerosols tomography is proposed. The suggested method applies filtered back-projection method on a pixel-wise blur estimation. Using the method, particles' concentrations in a 3D space is reconstructed from photos taken from different angles. The proposed method is shown to be very effective for assessing air pollution levels by means of multi angle imaging. Specifically, estimating images' blur as an indication for Particulate Matter (PM) ambient levels. The results of the research point towards strong correlation between image blur and pollution level in the medium and the ability to reconstruct the aerosols distribution in space.",
keywords = "Air pollution monitoring, filtered back projection, Monte-Carlo, multi-angle imaging",
author = "Or Vernik and Amir Degani and Barak Fishbain",
note = "Publisher Copyright: {\textcopyright} 2001-2012 IEEE.",
year = "2022",
month = may,
day = "1",
doi = "10.1109/JSEN.2022.3158890",
language = "אנגלית",
volume = "22",
pages = "8274--8281",
journal = "IEEE Sensors Journal",
issn = "1530-437X",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "9",

}

ARCSnake: Reconfigurable Snakelike Robot With Archimedean Screw Propulsion for Multidomain Mobility

Richter F, Gavrilov PV, Lam HM, Degani A, Yip MC. ARCSnake: Reconfigurable Snakelike Robot With Archimedean Screw Propulsion for Multidomain Mobility. IEEE Transactions on Robotics. 2022 Apr 1;38(2):797-809. [DOI] [Link to publication in Scopus]
 

Exploring and navigating in extreme environments, such as caves, oceans, and planetary bodies, are often too hazardous for humans, and as such, robots are possible surrogates. These robots are met with significant locomotion challenges that require traversing a wide range of surface roughnesses and topologies. Previous locomotion strategies, involving wheels or ambulatory motion, such as snake platforms, have success on specific surfaces but fail in others, which could be detrimental in exploration and navigation missions. In this article, we present a novel approach that combines snakelike robots with an Archimedean screw locomotion mechanism to provide multiple, effective mobility strategies in a large range of environments, including those that are difficult to traverse for wheeled and ambulatory robots. This work develops a robotic system called ARCSnake to demonstrate this locomotion principle and tested it in a variety of different terrains and environments in order to prove its controllable, multidomain, navigation capabilities. These tests show a wide breadth of scenarios that ARCSnake can handle, hence demonstrating its ability to traverse through extreme terrains.

@article{7936bd5a1b8246b88ccf03c04b6eff67,
title = "ARCSnake: Reconfigurable Snakelike Robot With Archimedean Screw Propulsion for Multidomain Mobility",
abstract = "Exploring and navigating in extreme environments, such as caves, oceans, and planetary bodies, are often too hazardous for humans, and as such, robots are possible surrogates. These robots are met with significant locomotion challenges that require traversing a wide range of surface roughnesses and topologies. Previous locomotion strategies, involving wheels or ambulatory motion, such as snake platforms, have success on specific surfaces but fail in others, which could be detrimental in exploration and navigation missions. In this article, we present a novel approach that combines snakelike robots with an Archimedean screw locomotion mechanism to provide multiple, effective mobility strategies in a large range of environments, including those that are difficult to traverse for wheeled and ambulatory robots. This work develops a robotic system called ARCSnake to demonstrate this locomotion principle and tested it in a variety of different terrains and environments in order to prove its controllable, multidomain, navigation capabilities. These tests show a wide breadth of scenarios that ARCSnake can handle, hence demonstrating its ability to traverse through extreme terrains.",
keywords = "Biologically inspired robots, Biomimetics, Field robots, Mechanism design",
author = "Florian Richter and Gavrilov, \{Peter V.\} and Lam, \{Hoi Man\} and Amir Degani and Yip, \{Michael C.\}",
note = "Publisher Copyright: {\textcopyright} 2004-2012 IEEE.",
year = "2022",
month = apr,
day = "1",
doi = "10.1109/TRO.2021.3104968",
language = "אנגלית",
volume = "38",
pages = "797--809",
journal = "IEEE Transactions on Robotics",
issn = "1552-3098",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "2",

}

החקלאי הרובוטי

דגני א. החקלאי הרובוטי. הטכניון. 2022;20-21. [לכתב העת בקטלוג המאוחד של ישראל]
 
פרופ' אמיר דגני מהפקולטה להנדסה אזרחית וסביבתית מפתח טכנולוגיה המסייעת בגידול פירות ובקטיפתם. (מתוך המאמר)
@article{745cb2f33bf54990b907aab0e4ab4f4d,
title = "החקלאי הרובוטי",
abstract = "פרופ' אמיר דגני מהפקולטה להנדסה אזרחית וסביבתית מפתח טכנולוגיה המסייעת בגידול פירות ובקטיפתם. (מתוך המאמר)",
author = "אמיר דגני",
note = "פרופ' אמיר דגני. https://jitc.bmj.com/content/10/5/e003733 (קישור למחקר הנדון במאמר).",
year = "2022",
language = "עברית",
pages = "20--21",
journal = "הטכניון",
issn = "0793-8543",

}

Vision-Based UAV-UGV Collaboration for Autonomous Construction Site Preparation

Elmakis O, Shaked T, Degani A. Vision-Based UAV-UGV Collaboration for Autonomous Construction Site Preparation. IEEE Access. 2022;10:51209-51220. [DOI] [Link to publication in Scopus]
 

Construction site preparation tasks rely on experienced operators and heavy machinery for clearing debris, earthmoving, leveling, and soil stabilization. These actions require complex collaboration between human teams to survey the site, estimate the material condition, and guide the operators accordingly. In recent years there has been a critical labor shortage due to increasing demands in construction. Integrating autonomous systems can mitigate this gap by replacing traditional methods with robotic solutions. However, while ideal conditions for automatic systems are static and highly controlled, construction sites are dynamic and unstructured environments. The ability of autonomous systems to overcome these conditions during outdoor construction site preparation tasks relies on their capacity to map the material on-site and continuously perform localization. This study suggests a solution to these problems by collaborating between an Unmanned Aerial Vehicle (UAV) and an Unmanned Ground Vehicle (UGV). In this method, the UAV produces a material map and monitors the UGV's location relative to known static landmarks. These measurements are then sent to the ground vehicle and are added to the onboard sensors using the Extended Kalman Filter (EKF) approach. Thus, the UAV enhances the operation of the UGV by providing an accurate localization and mapping from the air and allowing it to perform a site-preparation task beyond mere sensing. This approach is examined with simulation and validated by outdoor experiments. Additionally, this method is integrated within Shepherd, a custom-developed plugin for computer-aided design applications.

@article{5bf66ff52623400dbd2be9b59ba032f4,
title = "Vision-Based UAV-UGV Collaboration for Autonomous Construction Site Preparation",
abstract = "Construction site preparation tasks rely on experienced operators and heavy machinery for clearing debris, earthmoving, leveling, and soil stabilization. These actions require complex collaboration between human teams to survey the site, estimate the material condition, and guide the operators accordingly. In recent years there has been a critical labor shortage due to increasing demands in construction. Integrating autonomous systems can mitigate this gap by replacing traditional methods with robotic solutions. However, while ideal conditions for automatic systems are static and highly controlled, construction sites are dynamic and unstructured environments. The ability of autonomous systems to overcome these conditions during outdoor construction site preparation tasks relies on their capacity to map the material on-site and continuously perform localization. This study suggests a solution to these problems by collaborating between an Unmanned Aerial Vehicle (UAV) and an Unmanned Ground Vehicle (UGV). In this method, the UAV produces a material map and monitors the UGV's location relative to known static landmarks. These measurements are then sent to the ground vehicle and are added to the onboard sensors using the Extended Kalman Filter (EKF) approach. Thus, the UAV enhances the operation of the UGV by providing an accurate localization and mapping from the air and allowing it to perform a site-preparation task beyond mere sensing. This approach is examined with simulation and validated by outdoor experiments. Additionally, this method is integrated within Shepherd, a custom-developed plugin for computer-aided design applications.",
keywords = "Autonomous systems, multi-robot systems, pose estimation, robotics and automation, system implementation",
author = "Oren Elmakis and Tom Shaked and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2013 IEEE.",
year = "2022",
doi = "10.1109/ACCESS.2022.3170408",
language = "אנגלית",
volume = "10",
pages = "51209--51220",
journal = "IEEE Access",
issn = "2169-3536",
publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

Deep Reinforcement Learning for Safe Local Planning of a Ground Vehicle in Unknown Rough Terrain

Josef S, Degani A. Deep Reinforcement Learning for Safe Local Planning of a Ground Vehicle in Unknown Rough Terrain. IEEE Robotics and Automation Letters. 2020 Oct;5(4):6748-6755. 9149720. [DOI] [Link to publication in Scopus]
 

Safe unmanned ground vehicle navigation in unknown rough terrain is crucial for various tasks such as exploration, search and rescue and agriculture. Offline global planning is often not possible when operating in harsh, unknown environments, and therefore, online local planning must be used. Most online rough terrain local planners require heavy computational resources, used for optimal trajectory searching and estimating vehicle orientation in positions within the range of the sensors. In this work, we present a deep reinforcement learning approach for local planning in unknown rough terrain with zero-range to local-range sensing, achieving superior results compared to potential fields or local motion planning search spaces methods. Our approach includes reward shaping which provides a dense reward signal. We incorporate self-attention modules into our deep reinforcement learning architecture in order to increase the explainability of the learnt policy. The attention modules provide insight regarding the relative importance of sensed inputs during training and planning. We extend and validate our approach in a dynamic simulation, demonstrating successful safe local planning in environments with a continuous terrain and a variety of discrete obstacles. By adding the geometric transformation between two successive timesteps and the corresponding action as inputs, our architecture is able to navigate on surfaces with different levels of friction. Reinforcement learning, autonomous vehicle navigation, motion and path planning.

@article{1fc04f8f913543db86fdf8f32730234e,
title = "Deep Reinforcement Learning for Safe Local Planning of a Ground Vehicle in Unknown Rough Terrain",
abstract = "Safe unmanned ground vehicle navigation in unknown rough terrain is crucial for various tasks such as exploration, search and rescue and agriculture. Offline global planning is often not possible when operating in harsh, unknown environments, and therefore, online local planning must be used. Most online rough terrain local planners require heavy computational resources, used for optimal trajectory searching and estimating vehicle orientation in positions within the range of the sensors. In this work, we present a deep reinforcement learning approach for local planning in unknown rough terrain with zero-range to local-range sensing, achieving superior results compared to potential fields or local motion planning search spaces methods. Our approach includes reward shaping which provides a dense reward signal. We incorporate self-attention modules into our deep reinforcement learning architecture in order to increase the explainability of the learnt policy. The attention modules provide insight regarding the relative importance of sensed inputs during training and planning. We extend and validate our approach in a dynamic simulation, demonstrating successful safe local planning in environments with a continuous terrain and a variety of discrete obstacles. By adding the geometric transformation between two successive timesteps and the corresponding action as inputs, our architecture is able to navigate on surfaces with different levels of friction. Reinforcement learning, autonomous vehicle navigation, motion and path planning.",
keywords = "Motion planning, robot learning, unmanned autonomous vehicles",
author = "Shirel Josef and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2016 IEEE.",
year = "2020",
month = oct,
doi = "10.1109/LRA.2020.3011912",
language = "אנגלית",
volume = "5",
pages = "6748--6755",
journal = "IEEE Robotics and Automation Letters",
issn = "2377-3766",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "4",

}

Three-Layered Design of Electrothermal Actuators for Minimal Voltage Operation

Tibi G, Sachyani Keneth E, Layani M, Magdassi S, Degani A. Three-Layered Design of Electrothermal Actuators for Minimal Voltage Operation. Soft Robotics. 2020 Oct;7(5):649-662. [DOI] [Link to publication in Scopus]
 

By designing an actuator composed of thin layers with different coefficients of thermal expansion (CTE) together with an electrically conductive layer, the CTE mismatch can be utilized to produce soft electrothermal actuators (ETAs). These actuators have been typically implemented using only two layers, commonly relying on Timoshenko's analytic model that correlates the temperature to the actuator's curvature. In this study, we extend the analytic model to include the thermoelectric relation present in ETAs, that is, the conductive layer's properties with respect to the operation temperature. By applying the thermoelectric relation, a minimal voltage optimization can be applied to the analytic model. Using dimensionless analysis, we optimize the ETAs performance for both bi- A nd tri-layer ETAs with and without the thermal modeling. The bi-layer optimization not only predicts the maximal value for the bi-layer performance but also provides the optimal thickness of each layer for any couple of materials. We validate the tri-layer analytic model experimentally by measuring the curvature for different third layer thicknesses. Finally, we optimize the tri-layer design based on the analytic model, which can achieve an improvement in curvature per voltage of >3000% over the optimal bi-layer ETA.

@article{733f665daab54cd5b7c1e6897d75b1bf,
title = "Three-Layered Design of Electrothermal Actuators for Minimal Voltage Operation",
abstract = "By designing an actuator composed of thin layers with different coefficients of thermal expansion (CTE) together with an electrically conductive layer, the CTE mismatch can be utilized to produce soft electrothermal actuators (ETAs). These actuators have been typically implemented using only two layers, commonly relying on Timoshenko's analytic model that correlates the temperature to the actuator's curvature. In this study, we extend the analytic model to include the thermoelectric relation present in ETAs, that is, the conductive layer's properties with respect to the operation temperature. By applying the thermoelectric relation, a minimal voltage optimization can be applied to the analytic model. Using dimensionless analysis, we optimize the ETAs performance for both bi- A nd tri-layer ETAs with and without the thermal modeling. The bi-layer optimization not only predicts the maximal value for the bi-layer performance but also provides the optimal thickness of each layer for any couple of materials. We validate the tri-layer analytic model experimentally by measuring the curvature for different third layer thicknesses. Finally, we optimize the tri-layer design based on the analytic model, which can achieve an improvement in curvature per voltage of >3000\% over the optimal bi-layer ETA.",
keywords = "electrothermal actuators, minimal voltage actuation, soft actuators, thermal expansion actuation",
author = "Gal Tibi and \{Sachyani Keneth\}, Ela and Michael Layani and Shlomo Magdassi and Amir Degani",
note = "Publisher Copyright: {\textcopyright} Copyright 2020, Mary Ann Liebert, Inc., publishers 2020.",
year = "2020",
month = oct,
doi = "10.1089/soro.2018.0160",
language = "אנגלית",
volume = "7",
pages = "649--662",
journal = "Soft Robotics",
issn = "2169-5172",
publisher = "SAGE Publications Ltd",
number = "5",

}

Minimalistic control for reaching absolute state of a one-legged dynamic robot on uncertain terrain

Gaathon A, Degani A. Minimalistic control for reaching absolute state of a one-legged dynamic robot on uncertain terrain. Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME. 2020 Jul;142(7):142-7_A6_06. [DOI] [Link to publication in Scopus]
 

Footstep and path planning for dynamic legged robots is complex, and even if such a plan exists, execution is even harder. We propose a new method for a planar model of a dynamic legged robot that brings the trajectory to an absolute desired destination even on unknown rough terrain with minimal sensing. This can later aid a global planner to reach “way-points” with low destination errors. The basic block of the technique incorporates two consecutive jumps, each triggers a minimalistic control method to govern a sole controller-the leg angle during flight. Only two detection sensors and initial state information are required during implementation. Prior to execution, an optimization process is initiated to obtain the temporal control laws for both jumps. This work presents the process of obtaining the control parameters and studies the performance and limitations of the scheme.

@article{18c6f4eeca9b4074a4a10a0414f8b3dd,
title = "Minimalistic control for reaching absolute state of a one-legged dynamic robot on uncertain terrain",
abstract = "Footstep and path planning for dynamic legged robots is complex, and even if such a plan exists, execution is even harder. We propose a new method for a planar model of a dynamic legged robot that brings the trajectory to an absolute desired destination even on unknown rough terrain with minimal sensing. This can later aid a global planner to reach {\textquotedblleft}way-points{\textquotedblright} with low destination errors. The basic block of the technique incorporates two consecutive jumps, each triggers a minimalistic control method to govern a sole controller-the leg angle during flight. Only two detection sensors and initial state information are required during implementation. Prior to execution, an optimization process is initiated to obtain the temporal control laws for both jumps. This work presents the process of obtaining the control parameters and studies the performance and limitations of the scheme.",
author = "Adar Gaathon and Amir Degani",
note = "Publisher Copyright: Copyright {\textcopyright} 2020 by ASME",
year = "2020",
month = jul,
doi = "10.1115/1.4046403",
language = "אנגלית",
volume = "142",
journal = "Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME",
issn = "0022-0434",
publisher = "American Society of Mechanical Engineers (ASME)",
number = "7",

}

Canopy-Based Monte Carlo Localization in Orchards Using Top-View Imagery

Shalev O, Degani A. Canopy-Based Monte Carlo Localization in Orchards Using Top-View Imagery. IEEE Robotics and Automation Letters. 2020 Apr;5(2):2403-2410. 8979165. [DOI] [Link to publication in Scopus]
 

Localization of ground mobile robots in orchards is a complex problem which is yet to be fully addressed. The typical localization approaches are not adjusted to the characteristics of the orchard environment, especially the homogeneous scenery. To alleviate these difficulties, we propose to use top-view images of the orchard acquired in real-time. The top-view observation of the orchard provides a unique signature of every tree formed by the shape of its canopy. This practically changes the homogeneity premise in orchards and paves the way for addressing the kidnapped robot problem. Using computer vision techniques, we build a virtual canopies laser scan around the ground robot which is generated from low-altitude top-view video streams. We apply Monte Carlo Localization on this virtual scan to localize the robot against a high-altitude top-view snapshot image which is used as a map. The suggested approach is examined in numerous offline experiments conducted on data acquired in real orchards and is compared against a typical simulated approach which relies on ground-level trunk observations. The canopy-based approach demonstrated better performance in all measures, including convergence to centimeter-level accuracy.

@article{2eb972359c7f44ac8fe8b40d7ca77cb8,
title = "Canopy-Based Monte Carlo Localization in Orchards Using Top-View Imagery",
abstract = "Localization of ground mobile robots in orchards is a complex problem which is yet to be fully addressed. The typical localization approaches are not adjusted to the characteristics of the orchard environment, especially the homogeneous scenery. To alleviate these difficulties, we propose to use top-view images of the orchard acquired in real-time. The top-view observation of the orchard provides a unique signature of every tree formed by the shape of its canopy. This practically changes the homogeneity premise in orchards and paves the way for addressing the kidnapped robot problem. Using computer vision techniques, we build a virtual canopies laser scan around the ground robot which is generated from low-altitude top-view video streams. We apply Monte Carlo Localization on this virtual scan to localize the robot against a high-altitude top-view snapshot image which is used as a map. The suggested approach is examined in numerous offline experiments conducted on data acquired in real orchards and is compared against a typical simulated approach which relies on ground-level trunk observations. The canopy-based approach demonstrated better performance in all measures, including convergence to centimeter-level accuracy.",
keywords = "Localization, precision agriculture, robotics in agriculture, unmanned aerial vehicles, unmanned autonomous vehicles",
author = "Omer Shalev and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2020 IEEE.",
year = "2020",
month = apr,
doi = "10.1109/LRA.2020.2970975",
language = "אנגלית",
volume = "5",
pages = "2403--2410",
journal = "IEEE Robotics and Automation Letters",
issn = "2377-3766",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "2",

}

Pre-Programmed Tri-Layer Electro-Thermal Actuators Composed of Shape Memory Polymer and Carbon Nanotubes

Sachyani Keneth E, Scalet G, Layani M, Tibi G, Degani A, Auricchio F et al. Pre-Programmed Tri-Layer Electro-Thermal Actuators Composed of Shape Memory Polymer and Carbon Nanotubes. Soft Robotics. 2020 Apr;7(2):123-129. [DOI] [Link to publication in Scopus]
 

Due to their high deformability, lightness, and safe interaction with the surrounding environment, flexible actuators are key ingredients in soft robotics technologies. Among these, electro-thermal actuators (ETAs), based on carbon nanotubes (CNTs), are used to generate agile movements when current is applied. The extent of movement is determined mostly by the coefficient of thermal expansion (CTE) of the materials arranged in a bi-/tri-layer structure. However, current CNT-based ETAs usually accomplish only simple actions with limited movements. In this work, we successfully developed novel ETAs that are capable of carrying out various controllable movements, such as extremely high bending curvature or unique actuations mimicking a wheel and a worm. These superior functionalities are achieved by adding a third layer or hinges composed of a thermo-responsive shape memory polymer (SMP) onto a bi-layer CNT-kapton ETA. To predict the unique movements of the "triangle" and "worm" actuators, finite element simulations were performed. The combination of SMP and electro-thermal behavior demonstrates its potential for applications in the field of soft actuators and robotics.

@article{23e806d4f32d4e18881b34b4b21a710b,
title = "Pre-Programmed Tri-Layer Electro-Thermal Actuators Composed of Shape Memory Polymer and Carbon Nanotubes",
abstract = "Due to their high deformability, lightness, and safe interaction with the surrounding environment, flexible actuators are key ingredients in soft robotics technologies. Among these, electro-thermal actuators (ETAs), based on carbon nanotubes (CNTs), are used to generate agile movements when current is applied. The extent of movement is determined mostly by the coefficient of thermal expansion (CTE) of the materials arranged in a bi-/tri-layer structure. However, current CNT-based ETAs usually accomplish only simple actions with limited movements. In this work, we successfully developed novel ETAs that are capable of carrying out various controllable movements, such as extremely high bending curvature or unique actuations mimicking a wheel and a worm. These superior functionalities are achieved by adding a third layer or hinges composed of a thermo-responsive shape memory polymer (SMP) onto a bi-layer CNT-kapton ETA. To predict the unique movements of the {"}triangle{"} and {"}worm{"} actuators, finite element simulations were performed. The combination of SMP and electro-thermal behavior demonstrates its potential for applications in the field of soft actuators and robotics.",
keywords = "CNT, electro-thermal actuators, shape memory polymers, soft actuators, soft robotics",
author = "\{Sachyani Keneth\}, Ela and Giulia Scalet and Michael Layani and Gal Tibi and Amir Degani and Ferdinando Auricchio and Shlomo Magdassi",
note = "Publisher Copyright: {\textcopyright} Copyright 2020, Mary Ann Liebert, Inc.",
year = "2020",
month = apr,
doi = "10.1089/soro.2018.0159",
language = "אנגלית",
volume = "7",
pages = "123--129",
journal = "Soft Robotics",
issn = "2169-5172",
publisher = "SAGE Publications Ltd",
number = "2",

}

A conceptual framework and optimization for a task-based modular harvesting manipulator

Levin M, Degani A. A conceptual framework and optimization for a task-based modular harvesting manipulator. Computers and Electronics in Agriculture. 2019 Nov;166:104987. [DOI] [Link to publication in Scopus]
 

This paper provides a new concept of a modular, task-based agricultural robot whose construction can be changed using different combinations of basic parts. This way, the robot structure can be optimized to different tasks. This kind of robot combines the advantages of economical task-based robots with the ability to multitask, typically provided by costly universal robots. The modular approach can increase the profitability of agriculture robot manipulators and opens the door for robotic harvesters into agriculture. We present the entire flow of designing this type of modular agricultural manipulator. We first measure and model real trees and then calculate the time it takes the robot to reach every fruit according to the robot structure and location. Lastly, we use our optimization approach to find a robot optimal for pre-defined tasks, such as maximizing the number of fruit harvested or minimizing the picking time. Simulation results, based on actual three-dimensional tree models, show that modular robots can collect 30–40 percent more fruit than a robot with a fixed structure of the same complexity. Furthermore, a modular robot can be adapted to every season for different types of fruit; consequently, it provides much better results both in harvesting time and in amount of harvested fruit. Thus, a modular robot has the potential to increase the utilization compared with a fixed structure robot and helps overcome low-utilization barrier of entrance of robots into agriculture.

@article{984dc484351e414fbfee237b7dd3edda,
title = "A conceptual framework and optimization for a task-based modular harvesting manipulator",
abstract = "This paper provides a new concept of a modular, task-based agricultural robot whose construction can be changed using different combinations of basic parts. This way, the robot structure can be optimized to different tasks. This kind of robot combines the advantages of economical task-based robots with the ability to multitask, typically provided by costly universal robots. The modular approach can increase the profitability of agriculture robot manipulators and opens the door for robotic harvesters into agriculture. We present the entire flow of designing this type of modular agricultural manipulator. We first measure and model real trees and then calculate the time it takes the robot to reach every fruit according to the robot structure and location. Lastly, we use our optimization approach to find a robot optimal for pre-defined tasks, such as maximizing the number of fruit harvested or minimizing the picking time. Simulation results, based on actual three-dimensional tree models, show that modular robots can collect 30{\textendash}40 percent more fruit than a robot with a fixed structure of the same complexity. Furthermore, a modular robot can be adapted to every season for different types of fruit; consequently, it provides much better results both in harvesting time and in amount of harvested fruit. Thus, a modular robot has the potential to increase the utilization compared with a fixed structure robot and helps overcome low-utilization barrier of entrance of robots into agriculture.",
keywords = "Agricultural robot, Manipulators, Modular design, Robots, Task-based optimization",
author = "Mark Levin and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2019 Elsevier B.V.",
year = "2019",
month = nov,
doi = "10.1016/j.compag.2019.104987",
language = "אנגלית",
volume = "166",
journal = "Computers and Electronics in Agriculture",
issn = "0168-1699",
publisher = "Elsevier B.V.",

}

An Automated System for Projection of Interior Construction Layouts

Degani A, Li WB, Sacks R, Ma L. An Automated System for Projection of Interior Construction Layouts. IEEE Transactions on Automation Science and Engineering. 2019 Oct;16(4):1825-1835. 8664656. [DOI] [Link to publication in Scopus]
 

Layout of the interior works during building construction is time consuming and error prone. Given the cost involved, both for initial layout and for later rework where errors occur, researchers have sought to automate the layout task. Some have adopted marker-less augmented reality methods using heads-up displays or cameras, and others have proposed robots capable of marking out the works. The former encumber the workers, the latter are expensive to set up and are sensitive to site conditions, and neither has yet achieved the required accuracy. In this paper, we propose a more efficient approach to project relevant information from a building information model (BIM) onto the construction surface, directly augmenting the construction site with the design information. This is done using a portable system consisting of a 2-D laser scanner, an angled adjustable projector, and a camera. The system localizes itself within the already built outer walls using the laser scanner and the BIM model using a method derived from robotic mapping; it calibrates the projection correction parameters (keystone correction) using image analysis; and it projects the information with the angled projector. Testing results showed that the localization was accurate within a few millimeters and less than 3°, and the final projected image's error was approximately 1 cm. Initial calibration requires less than 1 min and does not require specialist skills. The system automates the layout task, preserves accuracy, and can provide rich model information on any interior surface. Note to Practitioners-Measuring and marking up of the interior works during building construction is time consuming and error prone. Layout must be repeated for each trade: Partitions, false ceilings, mechanical, electrical, and plumbing systems, and flooring and furnishings all require accurate marking of locations on floors, walls, and ceiling surfaces. Current automation is limited to the use of robotic total stations, but these only locate specific predetermined points. We propose a simple solution for automated layout, in which images from a building information model are projected directly onto the work surface. The system projects any desired information-drawings and images-onto the work surface (floor, walls, or ceiling) in the correct location, scale, and orientation. The prototype apparatus consists of a laser range scanner, a projector, and a camera. Projection of the work instructions directly onto the work surface is accurate and immediate. It saves the time required for workers to interpret and then mark up the dimensional information and it avoids the human error involved. The prototype is limited to environments in which computer projection is practical and currently requires planar surfaces.

@article{6bcae1d3fa49494aaa807090c7656d3a,
title = "An Automated System for Projection of Interior Construction Layouts",
abstract = "Layout of the interior works during building construction is time consuming and error prone. Given the cost involved, both for initial layout and for later rework where errors occur, researchers have sought to automate the layout task. Some have adopted marker-less augmented reality methods using heads-up displays or cameras, and others have proposed robots capable of marking out the works. The former encumber the workers, the latter are expensive to set up and are sensitive to site conditions, and neither has yet achieved the required accuracy. In this paper, we propose a more efficient approach to project relevant information from a building information model (BIM) onto the construction surface, directly augmenting the construction site with the design information. This is done using a portable system consisting of a 2-D laser scanner, an angled adjustable projector, and a camera. The system localizes itself within the already built outer walls using the laser scanner and the BIM model using a method derived from robotic mapping; it calibrates the projection correction parameters (keystone correction) using image analysis; and it projects the information with the angled projector. Testing results showed that the localization was accurate within a few millimeters and less than 3°, and the final projected image's error was approximately 1 cm. Initial calibration requires less than 1 min and does not require specialist skills. The system automates the layout task, preserves accuracy, and can provide rich model information on any interior surface. Note to Practitioners-Measuring and marking up of the interior works during building construction is time consuming and error prone. Layout must be repeated for each trade: Partitions, false ceilings, mechanical, electrical, and plumbing systems, and flooring and furnishings all require accurate marking of locations on floors, walls, and ceiling surfaces. Current automation is limited to the use of robotic total stations, but these only locate specific predetermined points. We propose a simple solution for automated layout, in which images from a building information model are projected directly onto the work surface. The system projects any desired information-drawings and images-onto the work surface (floor, walls, or ceiling) in the correct location, scale, and orientation. The prototype apparatus consists of a laser range scanner, a projector, and a camera. Projection of the work instructions directly onto the work surface is accurate and immediate. It saves the time required for workers to interpret and then mark up the dimensional information and it avoids the human error involved. The prototype is limited to environments in which computer projection is practical and currently requires planar surfaces.",
keywords = "Augmented reality (AR), automation in construction, building information modeling (BIM), construction site layout, keystone correction, localization",
author = "Amir Degani and Li, \{Wen Bo\} and Rafael Sacks and Ling Ma",
note = "Publisher Copyright: {\textcopyright} 2019 IEEE.",
year = "2019",
month = oct,
doi = "10.1109/TASE.2019.2897135",
language = "אנגלית",
volume = "16",
pages = "1825--1835",
journal = "IEEE Transactions on Automation Science and Engineering",
issn = "1545-5955",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "4",

}

A Single-Actuated Swimming Robot: Design, Modelling, and Experiments

Refael G, Degani A. A Single-Actuated Swimming Robot: Design, Modelling, and Experiments. Journal of Intelligent and Robotic Systems: Theory and Applications. 2019 May 15;94(2):471-489. [DOI] [Link to publication in Scopus]
 

This paper describes and investigates a simple swimming mechanism, which comprises two concentric bodies and two passive flaps. The mechanism propels itself forward by oscillating its inner body in a symmetric fashion using a single actuator. Using a few assumptions, we develop a simplified model to investigate the dynamics of the robot and to simulate its motion. Numerical simulations show the effect of design parameters and control inputs on the locomotion performance. Next, we show how changing the control input from symmetric to asymmetric oscillations leads to a turning motion, still using only a single motor. By modulating the asymmetry in the oscillatory input, the turning radius changes. We conclude with a validation of our model with a proof-of-concept prototype showing similar swimming motions.

@article{66e8ddeaf86c4743818f65ca539d9e2d,
title = "A Single-Actuated Swimming Robot: Design, Modelling, and Experiments",
abstract = "This paper describes and investigates a simple swimming mechanism, which comprises two concentric bodies and two passive flaps. The mechanism propels itself forward by oscillating its inner body in a symmetric fashion using a single actuator. Using a few assumptions, we develop a simplified model to investigate the dynamics of the robot and to simulate its motion. Numerical simulations show the effect of design parameters and control inputs on the locomotion performance. Next, we show how changing the control input from symmetric to asymmetric oscillations leads to a turning motion, still using only a single motor. By modulating the asymmetry in the oscillatory input, the turning radius changes. We conclude with a validation of our model with a proof-of-concept prototype showing similar swimming motions.",
keywords = "Dynamics, Marine robotics, Underactuated robots",
author = "Gilad Refael and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2018, Springer Science+Business Media B.V., part of Springer Nature.",
year = "2019",
month = may,
day = "15",
doi = "10.1007/s10846-018-0776-x",
language = "אנגלית",
volume = "94",
pages = "471--489",
journal = "Journal of Intelligent and Robotic Systems: Theory and Applications",
issn = "0921-0296",
publisher = "Springer Nature",
number = "2",

}

Sensor data fusion of a redundant dual-platform robot for elevation mapping

Turgeman A, Shoval S, Degani A. Sensor data fusion of a redundant dual-platform robot for elevation mapping. Journal of Robotics and Mechatronics. 2018 Feb;30(1):106-116. [DOI] [Link to publication in Scopus]
 

This paper presents a novel methodology for localization and terrain mapping along a defined course such as narrow tunnels and pipes, using a redundant unmanned ground vehicle kinematic design. The vehicle is designed to work in unknown environments without the use of external sensors. The design consists of two platforms, connected by a passive, semi-rigid three-bar mechanism. Each platform includes separate sets of local sensors and a controller. In addition, a central controller logs the data and synchronizes the plat-forms’ motion. According to the dynamic patterns of the redundant information, a fusion algorithm, based on a centralized Kalman filter, receives data from the different sets of inputs (mapping techniques), and produces an elevation map along the traversed route in the x-z sagittal plane. The method is tested in various scenarios using simulated and real-world setups. The experimental results show high degree of accuracy on different terrains. The proposed system is suitable for mapping terrains in confined spaces such as underground tunnels and wrecks where standard mapping devices such as GPS, laser scanners and cameras are not applicable.

@article{ef5caf4595414841adf8a74319eb87d7,
title = "Sensor data fusion of a redundant dual-platform robot for elevation mapping",
abstract = "This paper presents a novel methodology for localization and terrain mapping along a defined course such as narrow tunnels and pipes, using a redundant unmanned ground vehicle kinematic design. The vehicle is designed to work in unknown environments without the use of external sensors. The design consists of two platforms, connected by a passive, semi-rigid three-bar mechanism. Each platform includes separate sets of local sensors and a controller. In addition, a central controller logs the data and synchronizes the plat-forms{\textquoteright} motion. According to the dynamic patterns of the redundant information, a fusion algorithm, based on a centralized Kalman filter, receives data from the different sets of inputs (mapping techniques), and produces an elevation map along the traversed route in the x-z sagittal plane. The method is tested in various scenarios using simulated and real-world setups. The experimental results show high degree of accuracy on different terrains. The proposed system is suitable for mapping terrains in confined spaces such as underground tunnels and wrecks where standard mapping devices such as GPS, laser scanners and cameras are not applicable.",
keywords = "Data fusion, Robot control, Robotic sensing, Robotic terrain mapping, Signal estimation",
author = "Avi Turgeman and Shraga Shoval and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2018, Fuji Technology Press. All rights reserved.",
year = "2018",
month = feb,
doi = "10.20965/jrm.2018.p0106",
language = "אנגלית",
volume = "30",
pages = "106--116",
journal = "Journal of Robotics and Mechatronics",
issn = "0915-3942",
publisher = "Fuji Technology Press",
number = "1",

}

A methodology of orchard architecture design for an optimal harvesting robot

Bloch V, Degani A, Bechar A. A methodology of orchard architecture design for an optimal harvesting robot. Biosystems Engineering. 2018 Feb;166:126-137. [DOI] [Link to publication in Scopus]
 

To improve robot performance for agricultural tasks, and decrease its cost, the robot can be optimally designed for a specific task in a specific working environment. However, since the environment defines the robot optimal kinematics, the environment itself should also be optimised for optimal robot performance. The objective of this paper is to present and demonstrate a methodology for simultaneous optimal design of robot kinematic and the working environment. This methodology was demonstrated by an example on a tree orchard design for an apple harvesting robot. First, an optimal robot structure for apple picking task was found for a number of tree architectures (shaped by different training systems): Central Leader, Y-trellis and Tall Spindle. Results indicate that for minimising the average apple picking time, the Tall Spindle architecture is preferable for the robotic harvesting of both a single tree and a tree row. Further, the influence of the robot platform motion time on the chosen robot kinematics and the tree training system was analysed. Results show that for fast platforms, the Tall spindle architecture is advantageous. If the platform movement between positions near the trees is slow, the Central Leader architecture is favourable. Additionally, the tilt angle of the Y-trellis training system was analysed using simulated models created by the L-systems simulations. The optimal tilt angle was found to be nearly horizontal (85°), allowing the robot designer to choose the optimal combination of the robot kinematics, number of robot harvesting positions around the tree and the tree training system.

@article{72ec3e32e2b846c0a1da583e4685f288,
title = "A methodology of orchard architecture design for an optimal harvesting robot",
abstract = "To improve robot performance for agricultural tasks, and decrease its cost, the robot can be optimally designed for a specific task in a specific working environment. However, since the environment defines the robot optimal kinematics, the environment itself should also be optimised for optimal robot performance. The objective of this paper is to present and demonstrate a methodology for simultaneous optimal design of robot kinematic and the working environment. This methodology was demonstrated by an example on a tree orchard design for an apple harvesting robot. First, an optimal robot structure for apple picking task was found for a number of tree architectures (shaped by different training systems): Central Leader, Y-trellis and Tall Spindle. Results indicate that for minimising the average apple picking time, the Tall Spindle architecture is preferable for the robotic harvesting of both a single tree and a tree row. Further, the influence of the robot platform motion time on the chosen robot kinematics and the tree training system was analysed. Results show that for fast platforms, the Tall spindle architecture is advantageous. If the platform movement between positions near the trees is slow, the Central Leader architecture is favourable. Additionally, the tilt angle of the Y-trellis training system was analysed using simulated models created by the L-systems simulations. The optimal tilt angle was found to be nearly horizontal (85°), allowing the robot designer to choose the optimal combination of the robot kinematics, number of robot harvesting positions around the tree and the tree training system.",
keywords = "Optimal environment design, Optimal tree architecture, Robot working environment, Robotic harvesting, Task based optimisation",
author = "Victor Bloch and Amir Degani and Avital Bechar",
note = "Publisher Copyright: {\textcopyright} 2017 IAgrE",
year = "2018",
month = feb,
doi = "10.1016/j.biosystemseng.2017.11.006",
language = "אנגלית",
volume = "166",
pages = "126--137",
journal = "Biosystems Engineering",
issn = "1537-5110",
publisher = "Academic Press",

}

Decision-making algorithms for safe robotic disassembling of randomly piled objects

Temtsin S, Degani A. Decision-making algorithms for safe robotic disassembling of randomly piled objects. Advanced Robotics. 2017 Dec 17;31(23-24):1281-1295. [DOI] [Link to publication in Scopus]
 

The task of disassembling a pile of objects in Urban Search and Rescue (USAR) sites often requires taking into consideration pile disturbances in order to keep the safety of the survivors, the USAR teams, or the safety of the site’s environment. This work compares four decision-making algorithms (DMAs) for the autonomous pile disassembling process. The DMA must elect a single block for removal. The Volume Height Algorithm (VHA) removes the object with the highest potential energy; the Filtered Volume Height Algorithm (FVHA) removes the object with the highest potential energy that does not support any other objects from below; the Kinematic Based Algorithm (KBA) decides to remove the least encapsulated object; and lastly, the Filtered Volume Height Kinematic Based Algorithm (FVHKBA) is a combination of FVHA and KBA. All algorithms were simulated and analysed under full knowledge conditions and the more realistic, partial knowledge conditions. In partial knowledge mode, the algorithm processes the knowledge of only the objects which can be seen from outside viewing points. Additionally, the effect of the pile homogeneity was examined by disassembling piles of identical blocks and of different sized blocks. The FVHA shows the most impressive performances regardless of knowledge conditions and pile homogeneity.

@article{29732874e83948cda962eb0ad120a7d9,
title = "Decision-making algorithms for safe robotic disassembling of randomly piled objects",
abstract = "The task of disassembling a pile of objects in Urban Search and Rescue (USAR) sites often requires taking into consideration pile disturbances in order to keep the safety of the survivors, the USAR teams, or the safety of the site{\textquoteright}s environment. This work compares four decision-making algorithms (DMAs) for the autonomous pile disassembling process. The DMA must elect a single block for removal. The Volume Height Algorithm (VHA) removes the object with the highest potential energy; the Filtered Volume Height Algorithm (FVHA) removes the object with the highest potential energy that does not support any other objects from below; the Kinematic Based Algorithm (KBA) decides to remove the least encapsulated object; and lastly, the Filtered Volume Height Kinematic Based Algorithm (FVHKBA) is a combination of FVHA and KBA. All algorithms were simulated and analysed under full knowledge conditions and the more realistic, partial knowledge conditions. In partial knowledge mode, the algorithm processes the knowledge of only the objects which can be seen from outside viewing points. Additionally, the effect of the pile homogeneity was examined by disassembling piles of identical blocks and of different sized blocks. The FVHA shows the most impressive performances regardless of knowledge conditions and pile homogeneity.",
keywords = "Pile disassembling, autonomous robotics, manipulation under uncertainties, robotic mobile manipulation",
author = "Sharon Temtsin and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2017 Taylor \& Francis and The Robotics Society of Japan.",
year = "2017",
month = dec,
day = "17",
doi = "10.1080/01691864.2017.1352537",
language = "אנגלית",
volume = "31",
pages = "1281--1295",
journal = "Advanced Robotics",
issn = "0169-1864",
publisher = "Taylor and Francis Ltd.",
number = "23-24",

}

A flight-phase terrain following control strategy for stable and robust hopping of a one-legged robot under large terrain variations

Shemer N, Degani A. A flight-phase terrain following control strategy for stable and robust hopping of a one-legged robot under large terrain variations. Bioinspiration and Biomimetics. 2017 Aug 4;12(4):046011. [DOI] [Link to publication in Scopus]
 

This work demonstrates a simple, once per step, flight-control method for robots running on a planar unknown rough-terrain environment. The robot used to exemplify these control strategies is the ParkourBot, a spring loaded inverted pendulum (SLIP)-based robot. The SLIP model is widely used for the description of humans and animals running motion and has been the basis for many robots. A known control scheme for increasing robustness of the conservative, SLIP model is the swing leg retraction (SLR) method. Despite of the SLR's popularity, it is not intended to be used on the more realistic, non-conservative damped SLIP model. On the damped SLIP model, the SLR controller failed to provide adequate results, therefore, we have derived a new simple, flight-phase control method called polynomial energy insertion (PEI). The new PEI method is based on the dead-beat solution of the damped simplified instantaneous SLIP (iSLIP) model, which assumes an infinitely stiff spring. Unlike the SLR which, starting from apex, changes the leg angle monotonically during flight, the PEI requires the leg length (hence, energy insertion) to change monotonically throughout the flight phase. Interestingly, the leg angle remains nearly constant. In simulations and experiments, we have compared the newly developed PEI to the previous SLR method. We have found that since the SLR does not control the horizontal velocity, it looses its stability under rough terrain. The PEI method was able to control the horizontal velocity and height from ground and hence showed great improvement in robustness to rough terrain. Moreover, in both simulations and experiments the PEI methods showed an increase in the mean jumps to failure of more than 30% compared to SLR-based controllers.

@article{c689d6b1f2044ad5849861cc6c54bd98,
title = "A flight-phase terrain following control strategy for stable and robust hopping of a one-legged robot under large terrain variations",
abstract = "This work demonstrates a simple, once per step, flight-control method for robots running on a planar unknown rough-terrain environment. The robot used to exemplify these control strategies is the ParkourBot, a spring loaded inverted pendulum (SLIP)-based robot. The SLIP model is widely used for the description of humans and animals running motion and has been the basis for many robots. A known control scheme for increasing robustness of the conservative, SLIP model is the swing leg retraction (SLR) method. Despite of the SLR's popularity, it is not intended to be used on the more realistic, non-conservative damped SLIP model. On the damped SLIP model, the SLR controller failed to provide adequate results, therefore, we have derived a new simple, flight-phase control method called polynomial energy insertion (PEI). The new PEI method is based on the dead-beat solution of the damped simplified instantaneous SLIP (iSLIP) model, which assumes an infinitely stiff spring. Unlike the SLR which, starting from apex, changes the leg angle monotonically during flight, the PEI requires the leg length (hence, energy insertion) to change monotonically throughout the flight phase. Interestingly, the leg angle remains nearly constant. In simulations and experiments, we have compared the newly developed PEI to the previous SLR method. We have found that since the SLR does not control the horizontal velocity, it looses its stability under rough terrain. The PEI method was able to control the horizontal velocity and height from ground and hence showed great improvement in robustness to rough terrain. Moreover, in both simulations and experiments the PEI methods showed an increase in the mean jumps to failure of more than 30\% compared to SLR-based controllers.",
keywords = "SLIP-based robots, dynamic robots, legged robots, minimalistic control, running robots, spring-mass model",
author = "Natan Shemer and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2017 IOP Publishing Ltd.",
year = "2017",
month = aug,
day = "4",
doi = "10.1088/1748-3190/aa741f",
language = "אנגלית",
volume = "12",
journal = "Bioinspiration and Biomimetics",
issn = "1748-3182",
publisher = "Institute of Physics",
number = "4",

}

Automatic herding reduces labour and increases milking frequency in robotic milking

Drach U, Halachmi I, Pnini T, Izhaki I, Degani A. Automatic herding reduces labour and increases milking frequency in robotic milking. Biosystems Engineering. 2017 Mar 1;155:134-141. [DOI] [Link to publication in Scopus]
 

The motivation of cows to be milked is a key factor in the utilisation of milking robots. If a cow does not voluntarily attend a robot stall, fetching, that requires expensive labour, is required. This research suggests a new concept, herding all the cows to the milking robot using an automatic herding system (AHS). An AHS was built as a system of slow moving mobile fences controlled by an industrial controller. The AHS herds all the cows to the milking robot. The AHS was used in a commercial farm with two milking robots, and the experiment was conducted for three months. The dairy herd was divided into a reference group (43 cows) and an experimental group (38 cows). The AHS was used only with the experiment group. Milking frequency increased in the experimental group by 45.5% (1.89 milkings d−1 vs. 2.75 milkings d−1), while there was no major change in the milking frequency in the reference group 0.4% (2.38 milkings d−1 vs. 2.39 milkings d−1). Milk yield increased in the experiment group 15.7% (35.65 kg d−1 vs. 41.25 kg d−1). There was also no major change in the milk yield in reference group 4% (31 kg d−1 vs. 29.76 kg d−1). There was an 80% decrease in labour time for fetching the cows to the milking robot in the experimental group (5 h day−1 vs. 1 h day−1) while there was no change in labour for the reference group. The AHS was therefore associated with higher milking frequency, higher milk yield and labour reduction, hence economic benefits are expected for the system.

@article{a6846368663943bdb9da91d6e31c7abc,
title = "Automatic herding reduces labour and increases milking frequency in robotic milking",
abstract = "The motivation of cows to be milked is a key factor in the utilisation of milking robots. If a cow does not voluntarily attend a robot stall, fetching, that requires expensive labour, is required. This research suggests a new concept, herding all the cows to the milking robot using an automatic herding system (AHS). An AHS was built as a system of slow moving mobile fences controlled by an industrial controller. The AHS herds all the cows to the milking robot. The AHS was used in a commercial farm with two milking robots, and the experiment was conducted for three months. The dairy herd was divided into a reference group (43 cows) and an experimental group (38 cows). The AHS was used only with the experiment group. Milking frequency increased in the experimental group by 45.5\% (1.89 milkings d−1 vs. 2.75 milkings d−1), while there was no major change in the milking frequency in the reference group 0.4\% (2.38 milkings d−1 vs. 2.39 milkings d−1). Milk yield increased in the experiment group 15.7\% (35.65 kg d−1 vs. 41.25 kg d−1). There was also no major change in the milk yield in reference group 4\% (31 kg d−1 vs. 29.76 kg d−1). There was an 80\% decrease in labour time for fetching the cows to the milking robot in the experimental group (5 h day−1 vs. 1 h day−1) while there was no change in labour for the reference group. The AHS was therefore associated with higher milking frequency, higher milk yield and labour reduction, hence economic benefits are expected for the system.",
keywords = "Automatic herding, Automatic milking system, Dairy cow, Efficiency, Milking interval",
author = "Uri Drach and Ilan Halachmi and Tal Pnini and Ido Izhaki and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2017 IAgrE",
year = "2017",
month = mar,
day = "1",
doi = "10.1016/j.biosystemseng.2016.12.010",
language = "אנגלית",
volume = "155",
pages = "134--141",
journal = "Biosystems Engineering",
issn = "1537-5110",
publisher = "Academic Press",

}

Development of an environment characterization methodology for optimal design of an agricultural robot

Bloch V, Bechar A, Degani A. Development of an environment characterization methodology for optimal design of an agricultural robot. Industrial Robot. 2017;44(1):94-103. [DOI] [Link to publication in Scopus]
 

Purpose - The purpose of this paper is to describe a methodology for characterization of the robot environment to help solve such problem as designing an optimal agricultural robot for a specific agricultural task. Design/methodology/approach - Defining and characterizing a task is a crucial step in the optimization of a task-specific robot. It is especially difficult in the agricultural domain because of the complexity and unstructured nature of the environment. In this research, trees are modeled from orchards and are used as the robot working environment, the geometrical features of an agricultural task are investigated and a method for designing an optimal agricultural robot is developed. Using this method, a simplified characteristic environment, representing the actual environment, is developed and used. Findings - Case studies showing that the optimal robot, which is designed based on the characteristic environment, is similar to the optimal robot, which is designed based on the actual environment (less than 4 per cent error), is presented, while the optimization run time is significantly shorter (up to 22 times) when using the characteristic environment. Originality/value - This paper proposes a new concept for solving the robot task-based optimization by the analysis of the task environment and characterizing it by a simpler artificial task environment. The methodology decreases the time of the optimal robot design, allowing to take into account more details in an acceptable time.

@article{08955ebce6f34e1ab99cc05ae19f69d9,
title = "Development of an environment characterization methodology for optimal design of an agricultural robot",
abstract = "Purpose - The purpose of this paper is to describe a methodology for characterization of the robot environment to help solve such problem as designing an optimal agricultural robot for a specific agricultural task. Design/methodology/approach - Defining and characterizing a task is a crucial step in the optimization of a task-specific robot. It is especially difficult in the agricultural domain because of the complexity and unstructured nature of the environment. In this research, trees are modeled from orchards and are used as the robot working environment, the geometrical features of an agricultural task are investigated and a method for designing an optimal agricultural robot is developed. Using this method, a simplified characteristic environment, representing the actual environment, is developed and used. Findings - Case studies showing that the optimal robot, which is designed based on the characteristic environment, is similar to the optimal robot, which is designed based on the actual environment (less than 4 per cent error), is presented, while the optimization run time is significantly shorter (up to 22 times) when using the characteristic environment. Originality/value - This paper proposes a new concept for solving the robot task-based optimization by the analysis of the task environment and characterizing it by a simpler artificial task environment. The methodology decreases the time of the optimal robot design, allowing to take into account more details in an acceptable time.",
keywords = "Agriculture, Field robotics, Robot design, Robot task characterization",
author = "Victor Bloch and Avital Bechar and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2017 Emerald Publishing Limited.",
year = "2017",
doi = "10.1108/IR-03-2016-0113",
language = "אנגלית",
volume = "44",
pages = "94--103",
journal = "Industrial Robot",
issn = "0143-991X",
publisher = "Emerald Publishing",
number = "1",

}

Enhanced movement of CNT-based actuators by a three-Layered structure with controlled resistivity

Sachyani E, Layani M, Tibi G, Avidan T, Degani A, Magdassi S. Enhanced movement of CNT-based actuators by a three-Layered structure with controlled resistivity. Sensors and Actuators, B: Chemical. 2017;252:1071-1077. [DOI] [Link to publication in Scopus]
 

Due to their unique movement and the lack of motoric parts, flexible actuators have recently been attracting considerable attention in regards to fabrication of soft robots. One of the most known flexible actuators are electro-thermal actuators (ETAs), based on Carbon Nanotubes (CNT). These are bi-layered actuators, triggered electrically, and capable of preforming actuation because of the different coefficient of thermal expansions (CTEs) of the layers. The main disadvantage of these actuators is their limited movement ability, therefore, significant efforts are being invested in improving the actuation of CNT-based actuators. A typical CNT-based actuator is composed of a CNT layer on a polyimide substrate. In this study we show how the deflection of the CNT-based actuators was improved by decreasing the resistance of the CNT layer. We also present, for the first time, a novel tri-layer structured actuator that enables extremely large movements, with a record value deflection of 300°, using a simple, low-cost fabrication method without any orientation of the layers. This was achieved by adding a third layer of a photopolymeriazble polymer on top of the two typical bilayer CNT Kapton device. We further modeled the effect of various parameters of the third layer, such as the Young's modulus and the thickness, on the actuation, supporting the experimental data.

@article{e506b35668fc4cf0b8e1e14229c9613c,
title = "Enhanced movement of CNT-based actuators by a three-Layered structure with controlled resistivity",
abstract = "Due to their unique movement and the lack of motoric parts, flexible actuators have recently been attracting considerable attention in regards to fabrication of soft robots. One of the most known flexible actuators are electro-thermal actuators (ETAs), based on Carbon Nanotubes (CNT). These are bi-layered actuators, triggered electrically, and capable of preforming actuation because of the different coefficient of thermal expansions (CTEs) of the layers. The main disadvantage of these actuators is their limited movement ability, therefore, significant efforts are being invested in improving the actuation of CNT-based actuators. A typical CNT-based actuator is composed of a CNT layer on a polyimide substrate. In this study we show how the deflection of the CNT-based actuators was improved by decreasing the resistance of the CNT layer. We also present, for the first time, a novel tri-layer structured actuator that enables extremely large movements, with a record value deflection of 300°, using a simple, low-cost fabrication method without any orientation of the layers. This was achieved by adding a third layer of a photopolymeriazble polymer on top of the two typical bilayer CNT Kapton device. We further modeled the effect of various parameters of the third layer, such as the Young's modulus and the thickness, on the actuation, supporting the experimental data.",
keywords = "CNT, Electro-thermal actuators, Flexible, Flexible actuators, Soft robotics",
author = "Ela Sachyani and Michael Layani and Gal Tibi and Tal Avidan and Amir Degani and Shlomo Magdassi",
note = "Publisher Copyright: {\textcopyright} 2017 Elsevier B.V.",
year = "2017",
doi = "10.1016/j.snb.2017.06.104",
language = "אנגלית",
volume = "252",
pages = "1071--1077",
journal = "Sensors and Actuators, B: Chemical",
issn = "0925-4005",
publisher = "Elsevier B.V.",

}

פיתוח גישה לתכנון רובוט חקלאי מבוסס משימה: [מתוך המדור: מיכון והנדסה]

לוין מ, דגני א. פיתוח גישה לתכנון רובוט חקלאי מבוסס משימה: [מתוך המדור: מיכון והנדסה]. ניר ותלם. 2017;76:48-49. [לכתב העת בקטלוג המאוחד של ישראל]
 
המחקר מתמקד בהוכחת התכנות של זרוע מודולרי לקטיף.
@article{048afe6237a14d8abab2f004bb327090,
title = "פיתוח גישה לתכנון רובוט חקלאי מבוסס משימה: [מתוך המדור: מיכון והנדסה]",
abstract = "המחקר מתמקד בהוכחת התכנות של זרוע מודולרי לקטיף.",
author = "מרק לוין and אמיר דגני",
note = "המאמר מתפרסם במסגרת אסופת מאמרים שכותרתה: {"}מתוך כנס האגודה הישראלית להנדסה חקלאית 2017{"}, המתפרסמת בעמ' 48-50. חלקו הראשון של המאמר התפרסם בגיליון 75 (ספטמבר-אוקטובר 2017, תשרי-חשון תשע{"}ח), עמ' 44-48.",
year = "2017",
language = "עברית",
volume = "76",
pages = "48--49",
journal = "ניר ותלם",

}

Dynamic single actuator robot climbing a chute: Period-doubling bifurcations: analysis and experiments

Degani A. Dynamic single actuator robot climbing a chute: Period-doubling bifurcations: analysis and experiments. Meccanica. 2016 May 1;51(5):1227-1243. [DOI] [Link to publication in Scopus]
 

The planar mechanism analyzed in this paper, called DSAC for Dynamic, Single Actuated Climber, comprises only two links connected by a single oscillating actuator. This simple open loop motion propels the robot stably between two vertical walls. We explore the local orbital stability of the DSAC mechanism. Using the Poincaré map, we reduce the analyzed dimension and find the stable regions while varying the control inputs and mechanism’s parameters. Moreover, in response to a continuous change of a parameter of the mechanism, the symmetric and steady stable gait of the mechanism gradually evolves through a regime of period doubling bifurcations. This investigation includes numerical approximation of the local stability, and basin of attraction. Finally, the paper reports experimental results of open-loop, stable climbing in a planar, reduced gravity environment undergoing bifurcations which correlate well to the numerical analysis.

@article{b512280155554883b642652af3aa4fb9,
title = "Dynamic single actuator robot climbing a chute: Period-doubling bifurcations: analysis and experiments",
abstract = "The planar mechanism analyzed in this paper, called DSAC for Dynamic, Single Actuated Climber, comprises only two links connected by a single oscillating actuator. This simple open loop motion propels the robot stably between two vertical walls. We explore the local orbital stability of the DSAC mechanism. Using the Poincar{\'e} map, we reduce the analyzed dimension and find the stable regions while varying the control inputs and mechanism{\textquoteright}s parameters. Moreover, in response to a continuous change of a parameter of the mechanism, the symmetric and steady stable gait of the mechanism gradually evolves through a regime of period doubling bifurcations. This investigation includes numerical approximation of the local stability, and basin of attraction. Finally, the paper reports experimental results of open-loop, stable climbing in a planar, reduced gravity environment undergoing bifurcations which correlate well to the numerical analysis.",
author = "Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2015, Springer Science+Business Media Dordrecht.",
year = "2016",
month = may,
day = "1",
doi = "10.1007/s11012-015-0286-x",
language = "אנגלית",
volume = "51",
pages = "1227--1243",
journal = "Meccanica",
issn = "0025-6455",
publisher = "Springer Netherlands",
number = "5",

}

Stable and robust vehicle steering control using an overhead guide in greenhouse tasks

Gat G, Gan-Mor S, Degani A. Stable and robust vehicle steering control using an overhead guide in greenhouse tasks. Computers and Electronics in Agriculture. 2016 Feb 1;121:234-244. [DOI] [Link to publication in Scopus]
 

We have developed an autonomous vehicle steering control algorithm to aid with harvesting and spraying tasks in greenhouses to alleviate the problem of shortage of workers. We use an overhead guide constructed in the greenhouse to mark the desired path of the vehicle. A rigid bar is then connected from the guide to the vehicle. The vehicle steers and corrects itself by sensing the angle and distance of the vehicle from the guide. The control algorithm was developed for a two-dimensional kinematic vehicle model which was found to be valid for low-speed vehicles. The steering control was examined by numerical simulation in order to investigate the effects of parameters such as control-point location on stability deviations of the vehicle path. The asymptotic stability of the system was verified analytically and confirmed using numerical simulations. The control system was then simulated using a multibody dynamics simulation in conditions that better simulated an agricultural environment, thus confirming that the control system also maintained stability under rough conditions. Finally, in accordance with the control algorithm and the simulations, a proof-of-concept prototype of the vehicle was developed and the control algorithm was successfully deployed on a set of experiments.

@article{afd997dc292946858fb78b6880e7e52e,
title = "Stable and robust vehicle steering control using an overhead guide in greenhouse tasks",
abstract = "We have developed an autonomous vehicle steering control algorithm to aid with harvesting and spraying tasks in greenhouses to alleviate the problem of shortage of workers. We use an overhead guide constructed in the greenhouse to mark the desired path of the vehicle. A rigid bar is then connected from the guide to the vehicle. The vehicle steers and corrects itself by sensing the angle and distance of the vehicle from the guide. The control algorithm was developed for a two-dimensional kinematic vehicle model which was found to be valid for low-speed vehicles. The steering control was examined by numerical simulation in order to investigate the effects of parameters such as control-point location on stability deviations of the vehicle path. The asymptotic stability of the system was verified analytically and confirmed using numerical simulations. The control system was then simulated using a multibody dynamics simulation in conditions that better simulated an agricultural environment, thus confirming that the control system also maintained stability under rough conditions. Finally, in accordance with the control algorithm and the simulations, a proof-of-concept prototype of the vehicle was developed and the control algorithm was successfully deployed on a set of experiments.",
keywords = "Agricultural robotics, Autonomous vehicle, Greenhouse, Multibody simulation, Overhead guidance, Steering control",
author = "Gilad Gat and Samuel Gan-Mor and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2016 Elsevier B.V.",
year = "2016",
month = feb,
day = "1",
doi = "10.1016/j.compag.2015.12.019",
language = "אנגלית",
volume = "121",
pages = "234--244",
journal = "Computers and Electronics in Agriculture",
issn = "0168-1699",
publisher = "Elsevier B.V.",

}

Design of a Task-Based Modular Re-Configurable Agricultural Robot

Levin M, Degani A. Design of a Task-Based Modular Re-Configurable Agricultural Robot. IFAC-PapersOnLine. 2016;49(16):184-189. [DOI] [Link to publication in Scopus]
 

This paper presents a new method for designing an optimal harvesting agriculture manipulator. The novelty in our approach is the re-configurability of the robot's joints, i.e., the ability to assemble a given set of joints in a variable order to form different manipulators for different harvesting tasks. This way, we provide the farmer with the ability to change the robot's construction before each harvesting period to achieve maximal use of the robot throughout the year. The efficiency of task-based optimization is demonstrated on apple and tangerine harvesting tasks. The method is shown to improve efficiency in terms of success harvest ratio and harvest time compared with non-reconfigurable robots of the same complexity.

@article{1f76b63e443e4d6184ebef940abd22a9,
title = "Design of a Task-Based Modular Re-Configurable Agricultural Robot",
abstract = "This paper presents a new method for designing an optimal harvesting agriculture manipulator. The novelty in our approach is the re-configurability of the robot's joints, i.e., the ability to assemble a given set of joints in a variable order to form different manipulators for different harvesting tasks. This way, we provide the farmer with the ability to change the robot's construction before each harvesting period to achieve maximal use of the robot throughout the year. The efficiency of task-based optimization is demonstrated on apple and tangerine harvesting tasks. The method is shown to improve efficiency in terms of success harvest ratio and harvest time compared with non-reconfigurable robots of the same complexity.",
keywords = "Agriculture, Convex optimization, Manipulators, Robots, Task-based optimization",
author = "Mark Levin and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2016",
year = "2016",
doi = "10.1016/j.ifacol.2016.10.034",
language = "אנגלית",
volume = "49",
pages = "184--189",
journal = "IFAC-PapersOnLine",
issn = "2405-8963",
publisher = "Elsevier BV",
number = "16",

}

ניהוג עילי והסעה קרקעית של רכב אוטונומי

גת ג, גן-מור ש, רונן ב, אוהליאב ק, דגני א. ניהוג עילי והסעה קרקעית של רכב אוטונומי. ניר ותלם. 2015;59:44-46. [לכתב העת בקטלוג המאוחד של ישראל]
 
במסגרת המחקר הנוכחי פותחה מערכת בקרה להיגוי רכב הנוסע על הקרקע ומנוהג לפי פס-עילי. באלגוריתם של הבקרה יש אופציה לשינוי נקודת הבקרה במהלך נסיעת הרכב. הוכח כי שינוי מיקום נקודת הבקרה במהלך הנסיעה מאפשר התכנסות מהירה אל המסלול המתוכנן. הסימולציה באמצעות התוכנה הייעודית הראתה כי לכלי יכולת לשמירה על סטיות קטנות גם בקרקע משובשת המדמה תנאים קשים של סביבה חקלאית. הניסויים הראו התאמה טובה לסימולציות אם כי מגבלות פיזיות שלא ניתן להן ביטוי בסימולציה גרמו לסטייה גדולה במעט בניסויים. למערכת יתרון כלכלי מאחר והמסילה משמשת רק להכוונת הכלי בעוד שמשקל הכלי נישא על הקרקע. (מתוך המאמר)
@article{e72bd0caf9dd40beb752780100897629,
title = "ניהוג עילי והסעה קרקעית של רכב אוטונומי",
abstract = "במסגרת המחקר הנוכחי פותחה מערכת בקרה להיגוי רכב הנוסע על הקרקע ומנוהג לפי פס-עילי. באלגוריתם של הבקרה יש אופציה לשינוי נקודת הבקרה במהלך נסיעת הרכב. הוכח כי שינוי מיקום נקודת הבקרה במהלך הנסיעה מאפשר התכנסות מהירה אל המסלול המתוכנן. הסימולציה באמצעות התוכנה הייעודית הראתה כי לכלי יכולת לשמירה על סטיות קטנות גם בקרקע משובשת המדמה תנאים קשים של סביבה חקלאית. הניסויים הראו התאמה טובה לסימולציות אם כי מגבלות פיזיות שלא ניתן להן ביטוי בסימולציה גרמו לסטייה גדולה במעט בניסויים. למערכת יתרון כלכלי מאחר והמסילה משמשת רק להכוונת הכלי בעוד שמשקל הכלי נישא על הקרקע. (מתוך המאמר)",
author = "גלעד גת and שמואל גן-מור and בני רונן and קיסר אוהליאב and אמיר דגני",
year = "2015",
language = "עברית",
volume = "59",
pages = "44--46",
journal = "ניר ותלם",

}

Design and open-loop control of the parkourbot, a dynamic climbing robot

Degani A, Long AW, Feng S, Benjamin Brown H, Gregg RD, Choset H et al. Design and open-loop control of the parkourbot, a dynamic climbing robot. IEEE Transactions on Robotics. 2014 Jun;30(3):705-718. 6728727. [DOI] [Link to publication in Scopus]
 

The ParkourBot climbs in a planar reduced-gravity vertical chute by leaping back and forth between the chute's two parallel walls. The ParkourBot is comprised of a body with two springy legs and its controls consist of leg angles at touchdown and the energy stored in them. During flight, the robot stores elastic potential energy in its springy legs and then converts this potential energy in to kinetic energy at touchdown, when it 'kicks off' a wall. This paper describes the ParkourBot's mechanical design, modeling, and open-loop climbing experiments. The mechanical design makes use of the BowLeg, previously used for hopping on a flat ground. We introduce two models of the BowLeg ParkourBot: one is based on a nonzero stance duration using the spring-loaded inverted pendulum model, and the other is a simplified model (the simplest parkour model, or SPM) obtained as the leg stiffness approaches infinity and the stance time approaches zero. The SPM approximation provides the advantage of closed-form calculations. Finally, predictions of the models are validated by experiments in open-loop climbing in a reduced-gravity planar environment provided by an air table.

@article{fa0e68de966e487e8293a1c5bacbaaf5,
title = "Design and open-loop control of the parkourbot, a dynamic climbing robot",
abstract = "The ParkourBot climbs in a planar reduced-gravity vertical chute by leaping back and forth between the chute's two parallel walls. The ParkourBot is comprised of a body with two springy legs and its controls consist of leg angles at touchdown and the energy stored in them. During flight, the robot stores elastic potential energy in its springy legs and then converts this potential energy in to kinetic energy at touchdown, when it 'kicks off' a wall. This paper describes the ParkourBot's mechanical design, modeling, and open-loop climbing experiments. The mechanical design makes use of the BowLeg, previously used for hopping on a flat ground. We introduce two models of the BowLeg ParkourBot: one is based on a nonzero stance duration using the spring-loaded inverted pendulum model, and the other is a simplified model (the simplest parkour model, or SPM) obtained as the leg stiffness approaches infinity and the stance time approaches zero. The SPM approximation provides the advantage of closed-form calculations. Finally, predictions of the models are validated by experiments in open-loop climbing in a reduced-gravity planar environment provided by an air table.",
keywords = "Climbing robots, dynamic locomotion, legged robots, mechanism design",
author = "Amir Degani and Long, \{Andrew W.\} and Siyuan Feng and \{Benjamin Brown\}, H. and Gregg, \{Robert D.\} and Howie Choset and Mason, \{Matthew T.\} and Lynch, \{Kevin M.\}",
year = "2014",
month = jun,
doi = "10.1109/TRO.2014.2300213",
language = "אנגלית",
volume = "30",
pages = "705--718",
journal = "IEEE Transactions on Robotics",
issn = "1552-3098",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "3",

}

On the mechanics of functional asymmetry in bipedal walking

Gregg RD, Dhaher YY, Degani A, Lynch KM. On the mechanics of functional asymmetry in bipedal walking. IEEE Transactions on Biomedical Engineering. 2012 May;59(5):1310-1318. 6148264. [DOI] [Link to publication in Scopus]
 

This paper uses two symmetrical models, the passive compass-gait biped and a five-link 3-D biped, to computationally investigate the cause and function of gait asymmetry. We show that for a range of slope angles during passive 2-D walking and mass distributions during controlled 3-D walking, these models have asymmetric walking patterns between the left and right legs due to the phenomenon of spontaneous symmetry-breaking. In both cases a stable asymmetric family of gaits emerges from a symmetric family of gaits as the total energy increases (e.g., fast speeds). The ground reaction forces of each leg reflect different roles, roughly corresponding to support, propulsion, and motion control as proposed by the hypothesis of functional asymmetry in able-bodied human walking. These results suggest that body mechanics, independent of neurophysiological mechanisms such as leg dominance, may contribute to able-bodied gait asymmetry.

@article{0e868465088944f0be85644d4a5babe7,
title = "On the mechanics of functional asymmetry in bipedal walking",
abstract = "This paper uses two symmetrical models, the passive compass-gait biped and a five-link 3-D biped, to computationally investigate the cause and function of gait asymmetry. We show that for a range of slope angles during passive 2-D walking and mass distributions during controlled 3-D walking, these models have asymmetric walking patterns between the left and right legs due to the phenomenon of spontaneous symmetry-breaking. In both cases a stable asymmetric family of gaits emerges from a symmetric family of gaits as the total energy increases (e.g., fast speeds). The ground reaction forces of each leg reflect different roles, roughly corresponding to support, propulsion, and motion control as proposed by the hypothesis of functional asymmetry in able-bodied human walking. These results suggest that body mechanics, independent of neurophysiological mechanisms such as leg dominance, may contribute to able-bodied gait asymmetry.",
keywords = "Bifurcation, biological system modeling, dynamics, gait asymmetry",
author = "Gregg, \{Robert D.\} and Dhaher, \{Yasin Y.\} and Amir Degani and Lynch, \{Kevin M.\}",
note = "Funding Information: Manuscript received July 14, 2011; revised December 17, 2011; accepted January 16, 2012. Date of publication February 7, 2012; date of current version April 20, 2012. This project was supported by the National Center for Research Resources (NCRR) and the National Center for Advancing Translational Sciences (NCATS), National Institutes of Health (NIH) through Grant Number 3UL1 RR025741. The content is solely the responsibility of the authors and does not necessarily represent the official views of the NIH. This research was also supported by NSF under Grant IIS-1018167 and Grant IIS-08030826. Asterisk indicates corresponding author.",
year = "2012",
month = may,
doi = "10.1109/TBME.2012.2186808",
language = "אנגלית",
volume = "59",
pages = "1310--1318",
journal = "IEEE Transactions on Biomedical Engineering",
issn = "0018-9294",
publisher = "IEEE Computer Society",
number = "5",

}

DTAR - A dynamic, tube-ascending robot

Degani A, Choset H, Mason MT. DTAR - A dynamic, tube-ascending robot. IEEE Transactions on Robotics. 2011 Apr;27(2):360-364. 5723760. [DOI] [Link to publication in Scopus]
 

This paper investigates a novel minimalistic mechanism that ascends tubes. The mechanism is comprised of only a rigid body, two O-rings, and a motor rotating an eccentric mass. We describe the underlying locomotion principle of rocking and jamming, without the use of special bristles or spines, and demonstrate the robustness of this mechanism.

@article{bf371358794b4c328888d2bece042d2d,
title = "DTAR - A dynamic, tube-ascending robot",
abstract = "This paper investigates a novel minimalistic mechanism that ascends tubes. The mechanism is comprised of only a rigid body, two O-rings, and a motor rotating an eccentric mass. We describe the underlying locomotion principle of rocking and jamming, without the use of special bristles or spines, and demonstrate the robustness of this mechanism.",
keywords = "Miniature robot, tube-climbing",
author = "Amir Degani and Howie Choset and Mason, \{Matthew T.\}",
note = "Funding Information: Manuscript received July 1, 2010; revised November 15, 2010; accepted January 18, 2011. Date of publication March 3, 2011; date of current version April 7, 2011. This paper was recommended for publication by Associate Editor T. Murphey and Editor W. K. Chung upon evaluation of the reviewers{\textquoteright} comments. This work was supported in part by the National Science Foundation under Grant IIS 08030826 and in part by the Defense Advanced Research Projects Agency. This work does not necessarily reflect the position or the policy of the United States Government. No official endorsement should be inferred.",
year = "2011",
month = apr,
doi = "10.1109/TRO.2011.2108628",
language = "אנגלית",
volume = "27",
pages = "360--364",
journal = "IEEE Transactions on Robotics",
issn = "1552-3098",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "2",

}

A Highly Articulated Robotic Surgical System for Minimally Invasive Surgery

Ota T, Degani A, Schwartzman D, Zubiate B, McGarvey J, Choset H et al. A Highly Articulated Robotic Surgical System for Minimally Invasive Surgery. Annals of Thoracic Surgery. 2009 Apr;87(4):1253-1256. [DOI] [Link to publication in Scopus]
 

Purpose: We developed a novel, highly articulated robotic surgical system (CardioARM) to enable minimally invasive intrapericardial therapeutic delivery through a subxiphoid approach. We performed preliminary proof of concept studies in a porcine preparation by performing epicardial ablation. Description: CardioARM is a robotic surgical system having an articulated design to provide unlimited but controllable flexibility. The CardioARM consists of serially connected, rigid cyclindrical links housing flexible working ports through which catheter-based tools for therapy and imaging can be advanced. The CardioARM is controlled by a computer-driven, user interface, which is operated outside the operative field. Evaluation: In six experimental subjects, the CardioARM was introduced percutaneously through a subxiphoid access. A commercial 5-French radiofrequency ablation catheter was introduced through the working port, which was then used to guide deployment. In all subjects, regional ("linear") left atrial ablation was successfully achieved without complications. Conclusions: Based on these preliminary studies, we believe that the CardioARM promises to enable deployment of a number of epicardium-based therapies. Improvements in imaging techniques will likely facilitate increasingly complex procedures.

@article{bdeb2b76d5624d9588e20b4921394530,
title = "A Highly Articulated Robotic Surgical System for Minimally Invasive Surgery",
abstract = "Purpose: We developed a novel, highly articulated robotic surgical system (CardioARM) to enable minimally invasive intrapericardial therapeutic delivery through a subxiphoid approach. We performed preliminary proof of concept studies in a porcine preparation by performing epicardial ablation. Description: CardioARM is a robotic surgical system having an articulated design to provide unlimited but controllable flexibility. The CardioARM consists of serially connected, rigid cyclindrical links housing flexible working ports through which catheter-based tools for therapy and imaging can be advanced. The CardioARM is controlled by a computer-driven, user interface, which is operated outside the operative field. Evaluation: In six experimental subjects, the CardioARM was introduced percutaneously through a subxiphoid access. A commercial 5-French radiofrequency ablation catheter was introduced through the working port, which was then used to guide deployment. In all subjects, regional ({"}linear{"}) left atrial ablation was successfully achieved without complications. Conclusions: Based on these preliminary studies, we believe that the CardioARM promises to enable deployment of a number of epicardium-based therapies. Improvements in imaging techniques will likely facilitate increasingly complex procedures.",
author = "Takeyoshi Ota and Amir Degani and David Schwartzman and Brett Zubiate and Jeremy McGarvey and Howie Choset and Zenati, \{Marco A.\}",
note = "Funding Information: The project was supported by the National Heart, Lung, And Blood Institute (grant no. R01HL079940 awarded to MAZ). The content is solely the responsibility of the authors and does not necessarily represent the official views of the National Heart, Lung, and Blood Institute or the National Institutes of Health. Two of the authors (HC and MAZ) are co-inventors of the Robotic Surgical System and hold equity in Cardiorobotics Inc (licensee of the technology is Cardiorobotics Inc). The authors had full control of the design of the study, methods used, outcome measurements, analysis of data, and production of the written report.",
year = "2009",
month = apr,
doi = "10.1016/j.athoracsur.2008.10.026",
language = "אנגלית",
volume = "87",
pages = "1253--1256",
journal = "Annals of Thoracic Surgery",
issn = "0003-4975",
publisher = "Elsevier Inc.",
number = "4",

}

Recognizing knee pathologies by classifying instantaneous screws of the six degrees-of-freedom knee motion

Wolf A, Degani A. Recognizing knee pathologies by classifying instantaneous screws of the six degrees-of-freedom knee motion. Medical and Biological Engineering and Computing. 2007 May;45(5):475-482. [DOI] [Link to publication in Scopus]
 

We address the problem of knee pathology assessment by using screw theory to describe the knee motion and by using the screw representation of the motion as an input to a machine learning classifier. The flexions of knees with different pathologies are tracked using an optical tracking system. The instantaneous screw parameters which describe the transformation of the tibia with respect to the femur in each two successive observation is represented as the instantaneous screw axis of the motion given in its Plücker line coordinates along with its corresponding pitch. The set of instantaneous screw parameters associated with a particular knee with a given pathology is then identified and clustered in R6 to form a "signature" of the motion for the given pathology. Sawbones model and two cadaver knees with different pathologies were tracked, and the resulting screws were used to train a classifier system. The system was then tested successfully with new, never-trained-before data. The classifier demonstrated a very high success rate in identifying the knee pathology.

@article{0d4ca41005f74339b16fd0b4c78626af,
title = "Recognizing knee pathologies by classifying instantaneous screws of the six degrees-of-freedom knee motion",
abstract = "We address the problem of knee pathology assessment by using screw theory to describe the knee motion and by using the screw representation of the motion as an input to a machine learning classifier. The flexions of knees with different pathologies are tracked using an optical tracking system. The instantaneous screw parameters which describe the transformation of the tibia with respect to the femur in each two successive observation is represented as the instantaneous screw axis of the motion given in its Pl{\"u}cker line coordinates along with its corresponding pitch. The set of instantaneous screw parameters associated with a particular knee with a given pathology is then identified and clustered in R6 to form a {"}signature{"} of the motion for the given pathology. Sawbones model and two cadaver knees with different pathologies were tracked, and the resulting screws were used to train a classifier system. The system was then tested successfully with new, never-trained-before data. The classifier demonstrated a very high success rate in identifying the knee pathology.",
keywords = "Knee kinematics, Pathology classification, Screw axis, Support vector machines",
author = "Alon Wolf and Amir Degani",
year = "2007",
month = may,
doi = "10.1007/s11517-007-0174-1",
language = "אנגלית",
volume = "45",
pages = "475--482",
journal = "Medical and Biological Engineering and Computing",
issn = "0140-0118",
publisher = "Springer Science and Business Media Deutschland GmbH",
number = "5",

}

Epicardial Atrial Ablation Using a Novel Articulated Robotic Medical Probe Via a Percutaneous Subxiphoid Approach

Ota T, Degani A, Zubiate B, Wolf A, Choset H, Schwartzman D et al. Epicardial Atrial Ablation Using a Novel Articulated Robotic Medical Probe Via a Percutaneous Subxiphoid Approach. Innovations: Technology and Techniques in Cardiothoracic and Vascular Surgery. 2006;1(6):335-340. [DOI]
 

OBJECTIVE: Minimally invasive epicardial atrial ablation to cure atrial fibrillation through the use of a percutaneous subxiphoid approach currently has a lack of dedicated technology for intrapericardial navigation around the beating heart. We have developed a novel articulated robotic medical probe and performed preliminary experiments in a porcine preparation. METHODS: In five large, healthy pigs, the teleoperated robotic system was introduced inside the pericardial space through a percutaneous subxiphoid approach. Secondary visualization of the left atrium and left atrial appendage was achieved with the use of a 5-mm scope inserted through a left thoracic port. The operator actively controlled the path of the robot by using a master manipulator. The catheter, with an irrigated radiofrequency tip, was guided through the working port of the robot to achieve epicardial ablation of the left atrium. RESULTS: Access to the pericardial space and progression around the left atrium was successful in all cases, with no interference with the beating heart such as a fatal arrhythmia, unexpected bleeding, and hypotension. Epicardial ablation was successfully performed in all five cases. No adverse hemodynamic or electrophysiological events were noted during the trials. When the animals were killed, there was no visually detected injury on the surrounding mediastinal structures caused by ablation. Transmural ablation was confirmed by histopathology of the left atrium. CONCLUSIONS: We have developed a dedicated articulated robotic medical probe and successfully performed epicardial left atrial radiofrequency ablation. Based on the feedback from these preliminary experiments, the radius of curvature and proper visualization of the device are being improved in the next generation prototype.

@article{2e5b09d4a6274eadbb89d1df116ae4df,
title = "Epicardial Atrial Ablation Using a Novel Articulated Robotic Medical Probe Via a Percutaneous Subxiphoid Approach",
abstract = "OBJECTIVE: Minimally invasive epicardial atrial ablation to cure atrial fibrillation through the use of a percutaneous subxiphoid approach currently has a lack of dedicated technology for intrapericardial navigation around the beating heart. We have developed a novel articulated robotic medical probe and performed preliminary experiments in a porcine preparation. METHODS: In five large, healthy pigs, the teleoperated robotic system was introduced inside the pericardial space through a percutaneous subxiphoid approach. Secondary visualization of the left atrium and left atrial appendage was achieved with the use of a 5-mm scope inserted through a left thoracic port. The operator actively controlled the path of the robot by using a master manipulator. The catheter, with an irrigated radiofrequency tip, was guided through the working port of the robot to achieve epicardial ablation of the left atrium. RESULTS: Access to the pericardial space and progression around the left atrium was successful in all cases, with no interference with the beating heart such as a fatal arrhythmia, unexpected bleeding, and hypotension. Epicardial ablation was successfully performed in all five cases. No adverse hemodynamic or electrophysiological events were noted during the trials. When the animals were killed, there was no visually detected injury on the surrounding mediastinal structures caused by ablation. Transmural ablation was confirmed by histopathology of the left atrium. CONCLUSIONS: We have developed a dedicated articulated robotic medical probe and successfully performed epicardial left atrial radiofrequency ablation. Based on the feedback from these preliminary experiments, the radius of curvature and proper visualization of the device are being improved in the next generation prototype.",
author = "Takeyoshi Ota and Amir Degani and Brett Zubiate and Alon Wolf and Howie Choset and David Schwartzman and Zenati, \{Marco A\}",
year = "2006",
doi = "10.1097/imi.0b013e31802f43b1",
language = "אנגלית",
volume = "1",
pages = "335--340",
journal = "Innovations: Technology and Techniques in Cardiothoracic and Vascular Surgery",
issn = "1556-9845",
publisher = "SAGE Publications Ltd",
number = "6",

}

Conference contribution

Environment-Centric Planning for Aggregate Transport Using a Shared Trajectory Fabric

Manor N, Oliva F, Degani A. Environment-Centric Planning for Aggregate Transport Using a Shared Trajectory Fabric. In SAC 2026 - 41st Annual ACM Symposium on Applied Computing. Association for Computing Machinery. 2026. p. 783-784. (Proceedings of the ACM Symposium on Applied Computing). [DOI] [Link to publication in Scopus]
 

Autonomous earthwork aims to automate the movement of unlabeled aggregates such as soil, gravel, or debris, reducing human exposure to harsh construction environments. Classical pick-and-place pipelines do not naturally handle this setting, where material is moved in bulk and its shape changes continuously. We propose an environment-centric shared trajectory fabric that aggregates push routes into a heatmap of high-throughput highways. For each occupied cell, a visibility-aware graph search computes candidate push routes toward a target region, constructing a pushing heatmap in which high-value bands act as high-throughput highways for aggregate flow. By using selective updates to refresh the map locally, we achieve (7-9×) faster replanning in both synthetic 2D grid environments and a 3D PyBullet simulation of a shovel-equipped rover. Although we evaluate a single rover, the trajectory fabric is agent-agnostic and is intended as a reusable substrate for future multi-robot coordination.

@inproceedings{acd57030b4794a6cbe2e8e3d5fbc267c,
title = "Environment-Centric Planning for Aggregate Transport Using a Shared Trajectory Fabric",
abstract = "Autonomous earthwork aims to automate the movement of unlabeled aggregates such as soil, gravel, or debris, reducing human exposure to harsh construction environments. Classical pick-and-place pipelines do not naturally handle this setting, where material is moved in bulk and its shape changes continuously. We propose an environment-centric shared trajectory fabric that aggregates push routes into a heatmap of high-throughput highways. For each occupied cell, a visibility-aware graph search computes candidate push routes toward a target region, constructing a pushing heatmap in which high-value bands act as high-throughput highways for aggregate flow. By using selective updates to refresh the map locally, we achieve (7-9{\texttimes}) faster replanning in both synthetic 2D grid environments and a 3D PyBullet simulation of a shovel-equipped rover. Although we evaluate a single rover, the trajectory fabric is agent-agnostic and is intended as a reusable substrate for future multi-robot coordination.",
keywords = "autonomous earthwork, construction robotics, multi-agent systems",
author = "Nir Manor and Federico Oliva and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2026 Copyright held by the owner/author(s).; 41st Annual ACM Symposium on Applied Computing, SAC 2026 ; Conference date: 23-03-2026 Through 27-03-2026",
year = "2026",
month = jun,
day = "9",
doi = "10.1145/3748522.3779934",
language = "אנגלית",
series = "Proceedings of the ACM Symposium on Applied Computing",
publisher = "Association for Computing Machinery",
pages = "783--784",
booktitle = "SAC 2026 - 41st Annual ACM Symposium on Applied Computing",

}

Earth-Shaping with Heterogeneous Robotic Teams: From Sim to Real

Oliva F, Shaked T, Bar-Sinai KL, Shalev O, Elmakis O, Meles-Braverman A et al. Earth-Shaping with Heterogeneous Robotic Teams: From Sim to Real. In Berns K, Tokhi MO, Roennau A, Silva MF, Dillmann R, editors, Walking Robots into Real World - Proceedings of the CLAWAR 2024 Conference. Springer Science and Business Media Deutschland GmbH. 2024. p. 128-140. (Lecture Notes in Networks and Systems). [DOI] [Link to publication in Scopus]
 

This work presents an overview of autonomous earth-shaping and aggregate-forming tasks, which we address with a heterogeneous team of Unmanned Ground Vehicles equipped with shovels. Firstly, we introduce Sheperd, a Hardware In the Loop development tool integrated with ROS and physical engines like Gazebo and FlexHopper. We further address the problem of computational cost in these kinds of simulators, providing preliminary results to replace them with a probabilistic model for aggregate motion. We proceed by addressing the following major challenges: localizing the team of robots and mapping the aggregates, as well as efficient motion planning strategies. We address UGV localization and material mapping, utilizing vision-based UAV-UGV collaboration and optimization techniques for robustness. Then, we discuss motion planning, providing solutions to shape on-site material exclusively using pushing actions rather than more standard pick-and-place solutions.

@inproceedings{eb704238ee704734a1ceffe6cfe04d35,
title = "Earth-Shaping with Heterogeneous Robotic Teams: From Sim to Real",
abstract = "This work presents an overview of autonomous earth-shaping and aggregate-forming tasks, which we address with a heterogeneous team of Unmanned Ground Vehicles equipped with shovels. Firstly, we introduce Sheperd, a Hardware In the Loop development tool integrated with ROS and physical engines like Gazebo and FlexHopper. We further address the problem of computational cost in these kinds of simulators, providing preliminary results to replace them with a probabilistic model for aggregate motion. We proceed by addressing the following major challenges: localizing the team of robots and mapping the aggregates, as well as efficient motion planning strategies. We address UGV localization and material mapping, utilizing vision-based UAV-UGV collaboration and optimization techniques for robustness. Then, we discuss motion planning, providing solutions to shape on-site material exclusively using pushing actions rather than more standard pick-and-place solutions.",
keywords = "Earth-Shaping, Localization, Multi-Agent, Planning",
author = "Federico Oliva and Tom Shaked and Bar-Sinai, \{Karen Lee\} and Omer Shalev and Oren Elmakis and Ari Meles-Braverman and Amir Degani",
note = "Publisher Copyright: {\textcopyright} The Author(s), under exclusive license to Springer Nature Switzerland AG 2024.; 27th International Conference series on Climbing and Walking Robots and the Support Technologies for Mobile Machines, CLAWAR 2024 ; Conference date: 04-09-2024 Through 06-09-2024",
year = "2024",
doi = "10.1007/978-3-031-70722-3\_14",
language = "אנגלית",
isbn = "9783031707216",
series = "Lecture Notes in Networks and Systems",
publisher = "Springer Science and Business Media Deutschland GmbH",
pages = "128--140",
editor = "Karsten Berns and Tokhi, \{Mohammad Osman\} and Arne Roennau and Silva, \{Manuel F.\} and R{\"u}diger Dillmann",
booktitle = "Walking Robots into Real World - Proceedings of the CLAWAR 2024 Conference",
address = "גרמניה",

}

Design of a Minimalistic Torque Actuated Variable Rolling SLIP Leg for Robust Locomotion

Paul N, Gaathon A, Degani A. Design of a Minimalistic Torque Actuated Variable Rolling SLIP Leg for Robust Locomotion. In Cascalho JM, Mendes A, Funk M, Tokhi MO, Silva MF, Goher K, editors, Robotics in Natural Settings - CLAWAR 2022. Springer Science and Business Media Deutschland GmbH. 2023. p. 231-241. (Lecture Notes in Networks and Systems). [DOI] [Link to publication in Scopus]
 

In this paper we investigate the use of an optimal control coupling applied to a continuously jumping robot utilizing a single spiral-shaped leg. Exploiting multiple controllers simultaneously can increase robustness over uneven terrain. However, this can be difficult to actualize. By designing a spiral-shaped leg, we can couple leg length and stiffness and optimize leg retraction rate and torque. Through this embodied design we can achieve a robust minimalistic running robot with a simple feedforward controller.

@inproceedings{227922406e214178bf1aa04701ae4a2f,
title = "Design of a Minimalistic Torque Actuated Variable Rolling SLIP Leg for Robust Locomotion",
abstract = "In this paper we investigate the use of an optimal control coupling applied to a continuously jumping robot utilizing a single spiral-shaped leg. Exploiting multiple controllers simultaneously can increase robustness over uneven terrain. However, this can be difficult to actualize. By designing a spiral-shaped leg, we can couple leg length and stiffness and optimize leg retraction rate and torque. Through this embodied design we can achieve a robust minimalistic running robot with a simple feedforward controller.",
keywords = "Design optimization, Legged locomotion, Minimalistic control",
author = "Noah Paul and Adar Gaathon and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2023, The Author(s), under exclusive license to Springer Nature Switzerland AG.; 25th International Conference Series on Climbing and Walking Robots and the Support Technologies for Mobile Machines, CLAWAR 2022 ; Conference date: 12-09-2022 Through 14-09-2022",
year = "2023",
doi = "10.1007/978-3-031-15226-9\_23",
language = "אנגלית",
isbn = "9783031152252",
series = "Lecture Notes in Networks and Systems",
publisher = "Springer Science and Business Media Deutschland GmbH",
pages = "231--241",
editor = "Cascalho, \{Jos{\'e} M.\} and Armando Mendes and Matthias Funk and Tokhi, \{Mohammad Osman\} and Silva, \{Manuel F.\} and Khaled Goher",
booktitle = "Robotics in Natural Settings - CLAWAR 2022",
address = "גרמניה",

}

Tactile-Based Gripper Localization on 1-D Deformable Objects

Prigozin A, Degani A. Tactile-Based Gripper Localization on 1-D Deformable Objects. In 2021 IEEE 17th International Conference on Automation Science and Engineering, CASE 2021. IEEE Computer Society. 2021. p. 221-227. (IEEE International Conference on Automation Science and Engineering). [DOI] [Link to publication in Scopus]
 

As part of automation processes, robotic manipulators are occasionally required to assemble deformable objects, e.g., installing an O-ring into a groove. However, deformable objects are characterized by high uncertainty due to shape and length change under external forces. These uncertainties make the assembly process complex and slow and may lead to errors between the actual and desired gripping location. In this paper, we present a localization technique to estimate the actual gripping point by using the grid localization algorithm based on tactile sensing. To reduce the dependency on complex and relatively slow vision sensors, the pose estimation process is based only on tactile feedback, by recognizing features, e.g., corners, along the deformable object. In simulations and experiments, the proposed algorithm converged to the correct gripping point after three detected features with an accuracy of less than 1 mm.

@inproceedings{411e2a5992524132a3b389aa41f8fa6b,
title = "Tactile-Based Gripper Localization on 1-D Deformable Objects",
abstract = "As part of automation processes, robotic manipulators are occasionally required to assemble deformable objects, e.g., installing an O-ring into a groove. However, deformable objects are characterized by high uncertainty due to shape and length change under external forces. These uncertainties make the assembly process complex and slow and may lead to errors between the actual and desired gripping location. In this paper, we present a localization technique to estimate the actual gripping point by using the grid localization algorithm based on tactile sensing. To reduce the dependency on complex and relatively slow vision sensors, the pose estimation process is based only on tactile feedback, by recognizing features, e.g., corners, along the deformable object. In simulations and experiments, the proposed algorithm converged to the correct gripping point after three detected features with an accuracy of less than 1 mm.",
author = "Amit Prigozin and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2021 IEEE.; 17th IEEE International Conference on Automation Science and Engineering, CASE 2021 ; Conference date: 23-08-2021 Through 27-08-2021",
year = "2021",
month = aug,
day = "23",
doi = "10.1109/CASE49439.2021.9551534",
language = "אנגלית",
series = "IEEE International Conference on Automation Science and Engineering",
publisher = "IEEE Computer Society",
pages = "221--227",
booktitle = "2021 IEEE 17th International Conference on Automation Science and Engineering, CASE 2021",

}

Reactive Control for Bipedal Running over Random Discrete Terrain under Uncertainty

Nir O, Degani A. Reactive Control for Bipedal Running over Random Discrete Terrain under Uncertainty. In 2021 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2021. Institute of Electrical and Electronics Engineers Inc. 2021. p. 2061-2068. (IEEE International Conference on Intelligent Robots and Systems). [DOI] [Link to publication in Scopus]
 

This paper presents a reactive control framework for robotic bipedal running over random discrete terrain using a shift-invariant funnel library that can be composed into motion plans. The main contribution of the paper is the formalization of the funnel library and the introduction of a receding-horizon reactive planner that utilizes this funnel library. The proposed controller generates a robust motion plan on the fly, without the need for predefined footholds or center of mass trajectory, via sequential-composition of pre-computed funnels. The proposed method utilizes three layers of robustness: high-level reactive planning, low-level robust control, and funnel-based, pre-computed, performance guarantees. For clarity, we provide a detailed example, using the 5 degrees-of-freedom sagittal biped model. We demonstrate in simulation the ability of the framework to overcome uncertainty in sensing and model parameters.

@inproceedings{7533eeb39fb748ffa3a77476e01c091c,
title = "Reactive Control for Bipedal Running over Random Discrete Terrain under Uncertainty",
abstract = "This paper presents a reactive control framework for robotic bipedal running over random discrete terrain using a shift-invariant funnel library that can be composed into motion plans. The main contribution of the paper is the formalization of the funnel library and the introduction of a receding-horizon reactive planner that utilizes this funnel library. The proposed controller generates a robust motion plan on the fly, without the need for predefined footholds or center of mass trajectory, via sequential-composition of pre-computed funnels. The proposed method utilizes three layers of robustness: high-level reactive planning, low-level robust control, and funnel-based, pre-computed, performance guarantees. For clarity, we provide a detailed example, using the 5 degrees-of-freedom sagittal biped model. We demonstrate in simulation the ability of the framework to overcome uncertainty in sensing and model parameters.",
author = "Omer Nir and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2021 IEEE.; 2021 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2021 ; Conference date: 27-09-2021 Through 01-10-2021",
year = "2021",
doi = "10.1109/IROS51168.2021.9636809",
language = "אנגלית",
series = "IEEE International Conference on Intelligent Robots and Systems",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
pages = "2061--2068",
booktitle = "2021 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2021",

}

A minimalistic hyper-flexible manipulator: Modeling and control

Prigozin A, Degani A. A minimalistic hyper-flexible manipulator: Modeling and control. In 2020 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2020. Institute of Electrical and Electronics Engineers Inc. 2020. p. 8897-8902. 9341628. (IEEE International Conference on Intelligent Robots and Systems). [DOI] [Link to publication in Scopus]
 

Robotic manipulators can be found today in most industries, from autonomous warehouses to advanced assembly lines in factories. Most of these industrial robots are characterized by having non-flexible and highly rigid links. In dense and complex environments these manipulators require many degrees of freedom (DOFs) which complicates the mechanical structure of the manipulator, as well as the control and path planning algorithms. In this work we present a minimalistic approach to reduce the number of active DOFs by using non-rigid, Hyper-Flexible Manipulators (HFM). We introduce a dynamic model of the HFM as well as a control scheme to bring the end-effector to a desired position from known initial configuration. Finally, we present experiments that support the analytic part and simulative results of this paper.

@inproceedings{4fd3a1cd4ca04983a343632a0f911347,
title = "A minimalistic hyper-flexible manipulator: Modeling and control",
abstract = "Robotic manipulators can be found today in most industries, from autonomous warehouses to advanced assembly lines in factories. Most of these industrial robots are characterized by having non-flexible and highly rigid links. In dense and complex environments these manipulators require many degrees of freedom (DOFs) which complicates the mechanical structure of the manipulator, as well as the control and path planning algorithms. In this work we present a minimalistic approach to reduce the number of active DOFs by using non-rigid, Hyper-Flexible Manipulators (HFM). We introduce a dynamic model of the HFM as well as a control scheme to bring the end-effector to a desired position from known initial configuration. Finally, we present experiments that support the analytic part and simulative results of this paper.",
author = "Amit Prigozin and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2020 IEEE.; 2020 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2020 ; Conference date: 24-10-2020 Through 24-01-2021",
year = "2020",
month = oct,
day = "24",
doi = "10.1109/IROS45743.2020.9341628",
language = "אנגלית",
series = "IEEE International Conference on Intelligent Robots and Systems",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
pages = "8897--8902",
booktitle = "2020 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2020",

}

Steerable Burrowing Robot: Design, Modeling and Experiments

Barenboim M, Degani A. Steerable Burrowing Robot: Design, Modeling and Experiments. In 2020 IEEE International Conference on Robotics and Automation, ICRA 2020. Institute of Electrical and Electronics Engineers Inc. 2020. p. 829-835. 9196648. (Proceedings - IEEE International Conference on Robotics and Automation). [DOI] [Link to publication in Scopus]
 

This paper investigates a burrowing robot that can maneuver and steer while being submerged in a granular medium. The robot locomotes using an internal vibro-impact mechanism and steers using a rotating bevel-tip head. We formulate and investigate a non-holonomic model for the steering mechanism and a hybrid dynamics model for the thrusting mechanism. We perform a numerical analysis of the dynamics of the robot's thrusting mechanism using a simplified, orientation and depth dependent model for the drag forces acting on the robot. We first show, in simulation, that by carefully tuning various control input parameters, the thrusting mechanism can drive the robot both forward and backward. We present several experiments designed to evaluate and verify the simulative results using a proof-of-concept robot. We show that different input amplitudes indeed affect the direction of motion, as suggested by the simulation. We further demonstrate the ability of the robot to perform a simple S-shaped trajectory. These experiments demonstrate the feasibility of the robot's design and fidelity of the model.

@inproceedings{71b673b9d77f445ba361c26a640ca4f8,
title = "Steerable Burrowing Robot: Design, Modeling and Experiments",
abstract = "This paper investigates a burrowing robot that can maneuver and steer while being submerged in a granular medium. The robot locomotes using an internal vibro-impact mechanism and steers using a rotating bevel-tip head. We formulate and investigate a non-holonomic model for the steering mechanism and a hybrid dynamics model for the thrusting mechanism. We perform a numerical analysis of the dynamics of the robot's thrusting mechanism using a simplified, orientation and depth dependent model for the drag forces acting on the robot. We first show, in simulation, that by carefully tuning various control input parameters, the thrusting mechanism can drive the robot both forward and backward. We present several experiments designed to evaluate and verify the simulative results using a proof-of-concept robot. We show that different input amplitudes indeed affect the direction of motion, as suggested by the simulation. We further demonstrate the ability of the robot to perform a simple S-shaped trajectory. These experiments demonstrate the feasibility of the robot's design and fidelity of the model.",
author = "Moran Barenboim and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2020 IEEE.; 2020 IEEE International Conference on Robotics and Automation, ICRA 2020 ; Conference date: 31-05-2020 Through 31-08-2020",
year = "2020",
month = may,
doi = "10.1109/ICRA40945.2020.9196648",
language = "אנגלית",
series = "Proceedings - IEEE International Conference on Robotics and Automation",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
pages = "829--835",
booktitle = "2020 IEEE International Conference on Robotics and Automation, ICRA 2020",

}

Construction operation assessment and correction using laser scanning and projection feedback

Pevzner A, Hasan S, Sacks R, Degani A. Construction operation assessment and correction using laser scanning and projection feedback. In Proceedings of the 37th International Symposium on Automation and Robotics in Construction, ISARC 2020: From Demonstration to Practical Use - To New Stage of Construction Robot. International Association for Automation and Robotics in Construction (IAARC). 2020. p. 1247-1254. (Proceedings of the 37th International Symposium on Automation and Robotics in Construction, ISARC 2020: From Demonstration to Practical Use - To New Stage of Construction Robot). [Link to publication in Scopus]
 

Lean construction (LC) and Building Information Modeling (BIM) support an integrated vision for short cycle plan-do-check-act cycles of planning and control in construction. However, operations control tasks, such as delivery of design information to the =field, monitoing, progress evaluation and error detection are still largely manual and thus time consuming, costly and error-prone. Innovations in construction technologies can be applied to reduce cycle time, waste, construction errors and the rework that necessarily follows. In this context, we propose application of a projection and scanning technology to provide workers with real-time information and feedback regarding the quality and accuracy of their handiwork. The goal is to achieve proper quality in the first iteration, with fully automated inspection, and no rework.As a proof-of-concept, we demonstrate the system using an example of wall plastering. The result of plaster application is difficult to measure in conventional means, and errors are difficult to detect. Our system monitors the progress of the procedure(Field-to-BIM), evaluates the surface flatness and projects corrections onto the surface itself, after optimizing with respect to industry standards and tolerances (BIM-to-Field).We demonstrate the concept in an experimental setup using a Trimble™TX8 laser scanner and an angled adjustable projector.The results show high precision detection of wall flatness deviations, of up to 2 mm accuracy.

@inproceedings{bd14453562ea4f00970f05aa4af52a12,
title = "Construction operation assessment and correction using laser scanning and projection feedback",
abstract = "Lean construction (LC) and Building Information Modeling (BIM) support an integrated vision for short cycle plan-do-check-act cycles of planning and control in construction. However, operations control tasks, such as delivery of design information to the =field, monitoing, progress evaluation and error detection are still largely manual and thus time consuming, costly and error-prone. Innovations in construction technologies can be applied to reduce cycle time, waste, construction errors and the rework that necessarily follows. In this context, we propose application of a projection and scanning technology to provide workers with real-time information and feedback regarding the quality and accuracy of their handiwork. The goal is to achieve proper quality in the first iteration, with fully automated inspection, and no rework.As a proof-of-concept, we demonstrate the system using an example of wall plastering. The result of plaster application is difficult to measure in conventional means, and errors are difficult to detect. Our system monitors the progress of the procedure(Field-to-BIM), evaluates the surface flatness and projects corrections onto the surface itself, after optimizing with respect to industry standards and tolerances (BIM-to-Field).We demonstrate the concept in an experimental setup using a Trimble{\texttrademark}TX8 laser scanner and an angled adjustable projector.The results show high precision detection of wall flatness deviations, of up to 2 mm accuracy.",
keywords = "Building information modeling, Construction, Data acquisition, Human machine interaction, Sensing/recognition, Technologies",
author = "A. Pevzner and S. Hasan and R. Sacks and A. Degani",
note = "Publisher Copyright: {\textcopyright} 2020; 37th International Symposium on Automation and Robotics in Construction: From Demonstration to Practical Use - To New Stage of Construction Robot, ISARC 2020 ; Conference date: 27-10-2020 Through 28-10-2020",
year = "2020",
language = "אנגלית",
series = "Proceedings of the 37th International Symposium on Automation and Robotics in Construction, ISARC 2020: From Demonstration to Practical Use - To New Stage of Construction Robot",
publisher = "International Association for Automation and Robotics in Construction (IAARC)",
pages = "1247--1254",
booktitle = "Proceedings of the 37th International Symposium on Automation and Robotics in Construction, ISARC 2020",
address = "פינלנד",

}

A Variable Rolling SLIP Model for a Conceptual Leg Shape to Increase Robustness of Uncertain Velocity on Unknown Terrain

Gaathon A, Degani A. A Variable Rolling SLIP Model for a Conceptual Leg Shape to Increase Robustness of Uncertain Velocity on Unknown Terrain. In Toussaint M, Bicchi A, Hermans T, editors, Robotics: Science and Systems XVI. Massachusetts Institute of Technology. 2020. (Robotics: Science and Systems). [DOI] [Link to publication in Scopus] []
 

The use of simple control schemes with only a few basic sensors and no feedback allows improved stability when traversing unforeseen rough terrain by applying a single controller. Exploiting multiple controllers simultaneously can further improve robustness but is often mechanically hard to implement, especially when stiffness modulation is a controller. To overcome this limitation, we investigate and simulate a leg shape that applies variable leg stiffness and free-leg length. The leg shape couples the physical parameters with the leg angle of a monopod, while the leg orientation is governed with only a simple control law during the flight phase. We study the usage of an optimal controller coupling and show that it can increase robustness to perturbations in the initial horizontal velocity when traversing unknown rough terrain. This work presents the process of obtaining the optimal coupled parameters and demonstrates its benefits. This work also lays the foundations for a conceptual leg shape to exhibit the controllers physically.

@inproceedings{25fb1e48831946cab129753d55394dd0,
title = "A Variable Rolling SLIP Model for a Conceptual Leg Shape to Increase Robustness of Uncertain Velocity on Unknown Terrain",
abstract = " The use of simple control schemes with only a few basic sensors and no feedback allows improved stability when traversing unforeseen rough terrain by applying a single controller. Exploiting multiple controllers simultaneously can further improve robustness but is often mechanically hard to implement, especially when stiffness modulation is a controller. To overcome this limitation, we investigate and simulate a leg shape that applies variable leg stiffness and free-leg length. The leg shape couples the physical parameters with the leg angle of a monopod, while the leg orientation is governed with only a simple control law during the flight phase. We study the usage of an optimal controller coupling and show that it can increase robustness to perturbations in the initial horizontal velocity when traversing unknown rough terrain. This work presents the process of obtaining the optimal coupled parameters and demonstrates its benefits. This work also lays the foundations for a conceptual leg shape to exhibit the controllers physically.",
keywords = "Design optimization, Legged locomotion, Minimalistic control",
author = "Adar Gaathon and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2020, MIT Press Journals. All rights reserved.; 16th Robotics: Science and Systems, RSS 2020 ; Conference date: 12-07-2020 Through 16-07-2020",
year = "2020",
doi = "10.15607/RSS.2020.XVI.083",
language = "אנגלית",
isbn = "9780992374761",
series = "Robotics: Science and Systems",
publisher = "Massachusetts Institute of Technology",
editor = "Marc Toussaint and Antonio Bicchi and Tucker Hermans",
booktitle = "Robotics",
address = "ארצות הברית",

}

Swing leg retraction using virtual apex method for the ParkourBot climbing robot

Nir O, Gaathon A, Degani A. Swing leg retraction using virtual apex method for the ParkourBot climbing robot. In IROS 2017 - IEEE/RSJ International Conference on Intelligent Robots and Systems. Institute of Electrical and Electronics Engineers Inc. 2017. p. 3352-3358. 8206173. (IEEE International Conference on Intelligent Robots and Systems). [DOI] [Link to publication in Scopus]
 

This paper describes a simple control scheme for the two-legged dynamic climbing robot, the ParkourBot. Inspired by the swing leg retraction (SLR) method used on running robots, we propose to implement an SLR controller that does not require an actual apex crossing event as an initiator. The familiar SLR control for running is initiated when the center of mass (CoM) of the robot reaches the apex of its trajectory. Often, dynamic climbing gaits do not reach an apex. We therefore define an alternative initiator named, the virtual apex. We evaluate two simple models, the conservative spring loaded inverted pendulum (SLIP) model, and the more realistic non-conservative SLIP model. We show, in simulation, that using SLR we are able to stabilize and control the otherwise unstable conservative SLIP model. We also show, that using the SLR significantly increases the robustness of the non-conservative SLIP model. Finally, we validate our results through experiments on the ParkourBot climbing robot.

@inproceedings{c76871a5fb884a8c89e53a1f15aff7b0,
title = "Swing leg retraction using virtual apex method for the ParkourBot climbing robot",
abstract = "This paper describes a simple control scheme for the two-legged dynamic climbing robot, the ParkourBot. Inspired by the swing leg retraction (SLR) method used on running robots, we propose to implement an SLR controller that does not require an actual apex crossing event as an initiator. The familiar SLR control for running is initiated when the center of mass (CoM) of the robot reaches the apex of its trajectory. Often, dynamic climbing gaits do not reach an apex. We therefore define an alternative initiator named, the virtual apex. We evaluate two simple models, the conservative spring loaded inverted pendulum (SLIP) model, and the more realistic non-conservative SLIP model. We show, in simulation, that using SLR we are able to stabilize and control the otherwise unstable conservative SLIP model. We also show, that using the SLR significantly increases the robustness of the non-conservative SLIP model. Finally, we validate our results through experiments on the ParkourBot climbing robot.",
author = "Omer Nir and Adar Gaathon and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2017 IEEE.; 2017 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2017 ; Conference date: 24-09-2017 Through 28-09-2017",
year = "2017",
month = dec,
day = "13",
doi = "10.1109/IROS.2017.8206173",
language = "אנגלית",
series = "IEEE International Conference on Intelligent Robots and Systems",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
pages = "3352--3358",
booktitle = "IROS 2017 - IEEE/RSJ International Conference on Intelligent Robots and Systems",

}

Analytic modeling and experiments of tri-layer, electro-thermal actuators for thin and soft robotics

Tibi G, Sachyani E, Layani M, Magdassi S, Degani A. Analytic modeling and experiments of tri-layer, electro-thermal actuators for thin and soft robotics. In ICRA 2017 - IEEE International Conference on Robotics and Automation. Institute of Electrical and Electronics Engineers Inc. 2017. p. 6712-6717. 7989794. (Proceedings - IEEE International Conference on Robotics and Automation). [DOI] [Link to publication in Scopus]
 

By bonding micron-thin polymer layers with an electrically conductive layer, we can utilize the bi-metal effect to create a soft, thin, electrically-activated thermal actuator (ETA), which can be used in printed soft robots. Using ETAs have shown quite remarkable potential in previous works. However, to reveal their true capabilities, we propose to utilize a multi-layered ETA. In this research, we analytically model the actuator for both the bi-, and more importantly, tri-layer ETAs and analyze their behavior. We develop a simple intuitive model to better explain the benefits of the tri-layer actuation and to estimate the optimal design parameters. We verify the models by conducting an experiment to measure the curvature change for different third layer thicknesses. The experiments show a significant improvement in performance of the tri-layer actuators and display a good fit between the simplified analytic model and the full model.

@inproceedings{18ca00fd5cfc45d7aa054996b0b4ffce,
title = "Analytic modeling and experiments of tri-layer, electro-thermal actuators for thin and soft robotics",
abstract = "By bonding micron-thin polymer layers with an electrically conductive layer, we can utilize the bi-metal effect to create a soft, thin, electrically-activated thermal actuator (ETA), which can be used in printed soft robots. Using ETAs have shown quite remarkable potential in previous works. However, to reveal their true capabilities, we propose to utilize a multi-layered ETA. In this research, we analytically model the actuator for both the bi-, and more importantly, tri-layer ETAs and analyze their behavior. We develop a simple intuitive model to better explain the benefits of the tri-layer actuation and to estimate the optimal design parameters. We verify the models by conducting an experiment to measure the curvature change for different third layer thicknesses. The experiments show a significant improvement in performance of the tri-layer actuators and display a good fit between the simplified analytic model and the full model.",
author = "Gal Tibi and Ela Sachyani and Michael Layani and Shlomo Magdassi and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2017 IEEE.; 2017 IEEE International Conference on Robotics and Automation, ICRA 2017 ; Conference date: 29-05-2017 Through 03-06-2017",
year = "2017",
month = jul,
day = "21",
doi = "10.1109/ICRA.2017.7989794",
language = "אנגלית",
series = "Proceedings - IEEE International Conference on Robotics and Automation",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
pages = "6712--6717",
booktitle = "ICRA 2017 - IEEE International Conference on Robotics and Automation",

}

Adaptive swing leg retraction control for robust dynamic locomotion under large terrain variations

Gaathon A, Degani A. Adaptive swing leg retraction control for robust dynamic locomotion under large terrain variations. In Advances in Cooperative Robotics: Proceedings of the 19th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines, CLAWAR 2016. World Scientific Publishing Co. Pte. Ltd. 2016. p. 369-377. (Advances in Cooperative Robotics: Proceedings of the 19th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines, CLAWAR 2016). [DOI] [Link to publication in Scopus]
 

Swing leg retraction (SLR) is a common open-loop control that increases the stability of dynamic legged robots. A desirable feature of SLR open-loop control is that it leads the robot to a desired relative apex height above the ground. Yet, this ability deteriorates when traversing rough terrain, meaning that the robot does not maintain the desired height and ultimately loses its stability. We propose an adaptation algorithm that tunes the SLR control parameters automatically to maintain both stability and desire relative height in rough terrain. The method uses pre-planning, in which a simulation generates an estimation for the optimal leg angle for different drop heights and horizontal velocities. Using next apex velocity estimation, a polynomial least square fit calculates the optimal polynomial coefficients of the leg angle. These coefficients dictate leg angle value as a function of time from apex. This leads to stable traversing with much broader range of tolerated ground height perturbations relative to the native SLR open-loop control.

@inproceedings{49339a68507a4368a40092dc280b3803,
title = "Adaptive swing leg retraction control for robust dynamic locomotion under large terrain variations",
abstract = "Swing leg retraction (SLR) is a common open-loop control that increases the stability of dynamic legged robots. A desirable feature of SLR open-loop control is that it leads the robot to a desired relative apex height above the ground. Yet, this ability deteriorates when traversing rough terrain, meaning that the robot does not maintain the desired height and ultimately loses its stability. We propose an adaptation algorithm that tunes the SLR control parameters automatically to maintain both stability and desire relative height in rough terrain. The method uses pre-planning, in which a simulation generates an estimation for the optimal leg angle for different drop heights and horizontal velocities. Using next apex velocity estimation, a polynomial least square fit calculates the optimal polynomial coefficients of the leg angle. These coefficients dictate leg angle value as a function of time from apex. This leads to stable traversing with much broader range of tolerated ground height perturbations relative to the native SLR open-loop control.",
author = "Adar Gaathon and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2016, World Scientific Publishing Co. Pte Ltd. All rights reserved.; 19th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines, CLAWAR 2016 ; Conference date: 12-09-2016 Through 14-09-2016",
year = "2016",
doi = "10.1142/9789813149137\_0044",
language = "אנגלית",
isbn = "9789813149120",
series = "Advances in Cooperative Robotics: Proceedings of the 19th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines, CLAWAR 2016",
publisher = "World Scientific Publishing Co. Pte. Ltd.",
pages = "369--377",
booktitle = "Advances in Cooperative Robotics",

}

Momentum-driven single-actuated swimming robot

Refael G, Degani A. Momentum-driven single-actuated swimming robot. In IROS Hamburg 2015 - Conference Digest: IEEE/RSJ International Conference on Intelligent Robots and Systems. Institute of Electrical and Electronics Engineers Inc. 2015. p. 2285-2290. 7353684. (IEEE International Conference on Intelligent Robots and Systems). [DOI] [Link to publication in Scopus]
 

This paper investigates a simple swimming mechanism, which comprises two concentric bodies and two passive flaps. The mechanism propels itself forward by oscillating its inner body in a symmetric fashion using a single actuator. The paper starts by using a simple model to investigate the dynamics of the robot and to simulate its motion. Next, we simulate various design parameters and conclude that some parameters can improve the performance of the swimming robot. We conclude with a proof-of-concept prototype that is capable of swimming similar to the predicted model. Moreover, by using an asymmetric input, the mechanism is able to rotate in various curvatures. The combination of these forward and rotational gaits can be used to stabilize the robot onto a desired trajectory.

@inproceedings{0b1eb44ef9e049bca1c93e2994378859,
title = "Momentum-driven single-actuated swimming robot",
abstract = "This paper investigates a simple swimming mechanism, which comprises two concentric bodies and two passive flaps. The mechanism propels itself forward by oscillating its inner body in a symmetric fashion using a single actuator. The paper starts by using a simple model to investigate the dynamics of the robot and to simulate its motion. Next, we simulate various design parameters and conclude that some parameters can improve the performance of the swimming robot. We conclude with a proof-of-concept prototype that is capable of swimming similar to the predicted model. Moreover, by using an asymmetric input, the mechanism is able to rotate in various curvatures. The combination of these forward and rotational gaits can be used to stabilize the robot onto a desired trajectory.",
author = "Gilad Refael and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2015 IEEE.; IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2015 ; Conference date: 28-09-2015 Through 02-10-2015",
year = "2015",
month = dec,
day = "11",
doi = "10.1109/IROS.2015.7353684",
language = "אנגלית",
series = "IEEE International Conference on Intelligent Robots and Systems",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
pages = "2285--2290",
booktitle = "IROS Hamburg 2015 - Conference Digest",

}

Task characterization and classification for robotic manipulator optimal design in precision agriculture

Bloch V, Degani A, Bechar A. Task characterization and classification for robotic manipulator optimal design in precision agriculture. In Stafford JV, editor, Precision Agriculture 2015 - Papers Presented at the 10th European Conference on Precision Agriculture, ECPA 2015. Wageningen Academic Publishers. 2015. p. 313-320. (Precision Agriculture 2015 - Papers Presented at the 10th European Conference on Precision Agriculture, ECPA 2015). [DOI] [Link to publication in Scopus]
 

Manipulation tasks in precision agriculture require a robotic arm that can perform the task quickly and precisely. Robots with kinematics suitable for a specific task will perform better than a universal robot expected to perform several tasks. To provide a good fit between a robot and its task, the robot design must be based on a well-defined task model. A unique approach is proposed to design an optimal robot for a specific precision agriculture task and an approach to the classification of such tasks. One of the tasks considered is fruit picking. Apple and nectarine trees were measured with a passive manipulator device developed for this purpose. Statistical analysis was performed to define differences and similarities between the tree types. The results showed that different tasks require different robots to perform optimally in each task. In addition, precision agriculture tasks can be classified according to the optimal robotic arms.

@inproceedings{c654037744fe4054a051c6f789728c46,
title = "Task characterization and classification for robotic manipulator optimal design in precision agriculture",
abstract = "Manipulation tasks in precision agriculture require a robotic arm that can perform the task quickly and precisely. Robots with kinematics suitable for a specific task will perform better than a universal robot expected to perform several tasks. To provide a good fit between a robot and its task, the robot design must be based on a well-defined task model. A unique approach is proposed to design an optimal robot for a specific precision agriculture task and an approach to the classification of such tasks. One of the tasks considered is fruit picking. Apple and nectarine trees were measured with a passive manipulator device developed for this purpose. Statistical analysis was performed to define differences and similarities between the tree types. The results showed that different tasks require different robots to perform optimally in each task. In addition, precision agriculture tasks can be classified according to the optimal robotic arms.",
keywords = "Agricultural robotic manipulation, Agricultural task, Robot task characterization, Taskbased optimization",
author = "V. Bloch and A. Degani and A. Bechar",
year = "2015",
doi = "10.3920/978-90-8686-814-8\_38",
language = "אנגלית",
series = "Precision Agriculture 2015 - Papers Presented at the 10th European Conference on Precision Agriculture, ECPA 2015",
publisher = "Wageningen Academic Publishers",
pages = "313--320",
editor = "Stafford, \{John V.\}",
booktitle = "Precision Agriculture 2015 - Papers Presented at the 10th European Conference on Precision Agriculture, ECPA 2015",
address = "הולנד",
note = "10th European Conference on Precision Agriculture, ECPA 2015 ; Conference date: 12-07-2015 Through 16-07-2015",

}

Analytical control parameters of the swing leg retraction method using an instantaneous SLIP model

Shemer N, Degani A. Analytical control parameters of the swing leg retraction method using an instantaneous SLIP model. In IROS 2014 Conference Digest - IEEE/RSJ International Conference on Intelligent Robots and Systems. Institute of Electrical and Electronics Engineers Inc. 2014. p. 4065-4070. 6943134. (IEEE International Conference on Intelligent Robots and Systems). [DOI] [Link to publication in Scopus]
 

The Spring-Loaded Inverted Pendulum (SLIP) is a widely used model for the description of humans and animals running motion. The SLIP model is, however, sensitive to impact angle for various terrain heights. One known method for increasing the model's robustness to terrain changes is the Swing Leg Retraction (SLR) method. Despite its popularity, an analytic formulation of this method has yet been provided. In this work, using an instantaneous stance phase assumption, we present the increase in robustness of the swing method. This analysis provides a way to isolate the optimal parameters of the SLR. We validate these optimal parameters in simulations and proof-of-concept experiments in a planar environment.

@inproceedings{0491fcb0ceb246dcaec48cfb81386b36,
title = "Analytical control parameters of the swing leg retraction method using an instantaneous SLIP model",
abstract = "The Spring-Loaded Inverted Pendulum (SLIP) is a widely used model for the description of humans and animals running motion. The SLIP model is, however, sensitive to impact angle for various terrain heights. One known method for increasing the model's robustness to terrain changes is the Swing Leg Retraction (SLR) method. Despite its popularity, an analytic formulation of this method has yet been provided. In this work, using an instantaneous stance phase assumption, we present the increase in robustness of the swing method. This analysis provides a way to isolate the optimal parameters of the SLR. We validate these optimal parameters in simulations and proof-of-concept experiments in a planar environment.",
author = "Natan Shemer and Amir Degani",
note = "Publisher Copyright: {\textcopyright} 2014 IEEE.; 2014 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2014 ; Conference date: 14-09-2014 Through 18-09-2014",
year = "2014",
month = oct,
day = "31",
doi = "10.1109/IROS.2014.6943134",
language = "אנגלית",
series = "IEEE International Conference on Intelligent Robots and Systems",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
pages = "4065--4070",
booktitle = "IROS 2014 Conference Digest - IEEE/RSJ International Conference on Intelligent Robots and Systems",

}

Toward autonomous disassembling of randomly piled objects with minimal perturbation

Ornan O, Degani A. Toward autonomous disassembling of randomly piled objects with minimal perturbation. In IROS 2013: New Horizon, Conference Digest - 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems. 2013. p. 4983-4989. 6697076. (IEEE International Conference on Intelligent Robots and Systems). [DOI] [Link to publication in Scopus]
 

Autonomous capabilities for manipulating randomly piled objects may enhance current methods of path planning and open a new field of development for mobile manipulation and Urban Search And Rescue (USAR) robotics. This paper introduces the challenge of achieving such manipulation capabilities and as a first step presents three algorithms, including a proposed novel solution, for the selection of objects to remove from a pile. The proposed algorithm determines a removability rank for each object according to the degree of its encapsulation within other objects. Using the contact vectors of the examined object, it is possible to obtain the motions that will not violate the object's unilateral contact constraints. The removability rank of the object is proportional to the union of all such motions. All algorithms were tested in simulation in full and partial knowledge modes, and evaluated on a physical robot with a simple manipulator and sensor. This work contributes: the introduction of an important autonomous manipulation challenge, the solution of which will be useful in the field of manipulation in general and USAR in particular; a specific novel algorithm for the construction of disassembly plans for piled objects; and an experimental evaluation of three algorithms targeted at such construction.

@inproceedings{3adbb751bda742528af8e9e5a3cfa1e9,
title = "Toward autonomous disassembling of randomly piled objects with minimal perturbation",
abstract = "Autonomous capabilities for manipulating randomly piled objects may enhance current methods of path planning and open a new field of development for mobile manipulation and Urban Search And Rescue (USAR) robotics. This paper introduces the challenge of achieving such manipulation capabilities and as a first step presents three algorithms, including a proposed novel solution, for the selection of objects to remove from a pile. The proposed algorithm determines a removability rank for each object according to the degree of its encapsulation within other objects. Using the contact vectors of the examined object, it is possible to obtain the motions that will not violate the object's unilateral contact constraints. The removability rank of the object is proportional to the union of all such motions. All algorithms were tested in simulation in full and partial knowledge modes, and evaluated on a physical robot with a simple manipulator and sensor. This work contributes: the introduction of an important autonomous manipulation challenge, the solution of which will be useful in the field of manipulation in general and USAR in particular; a specific novel algorithm for the construction of disassembly plans for piled objects; and an experimental evaluation of three algorithms targeted at such construction.",
author = "Oni Ornan and Amir Degani",
year = "2013",
doi = "10.1109/IROS.2013.6697076",
language = "אנגלית",
isbn = "9781467363587",
series = "IEEE International Conference on Intelligent Robots and Systems",
pages = "4983--4989",
booktitle = "IROS 2013",
note = "2013 26th IEEE/RSJ International Conference on Intelligent Robots and Systems: New Horizon, IROS 2013 ; Conference date: 03-11-2013 Through 08-11-2013",

}

Feedback control experiments with the parkourbot

Long A, Degani A, Lynch K. Feedback control experiments with the parkourbot. In Adaptive Mobile Robotics - Proceedings of the 15th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines, CLAWAR 2012. World Scientific. 2012. p. 409-416. (Adaptive Mobile Robotics - Proceedings of the 15th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines, CLAWAR 2012). [DOI] [Link to publication in Scopus]
 

The ParkourBot is a planar dynamic climbing biped robot and is capable of dynamically locomoting between two vertical" walls in a reduced-gravity planar environment of an inclined air table. During flight, springy legs are compressed to store elastic energy. At impact, this potential energy is quickly converted to kinetic energy. In this paper, we demonstrate that simple feedback control strategies with a high-speed vision system can be used to control the Parkour- Bot to bounce in place, climb up and climb down.

@inproceedings{6d4f9d12c5af4067b95253abfeaed89e,
title = "Feedback control experiments with the parkourbot",
abstract = "The ParkourBot is a planar dynamic climbing biped robot and is capable of dynamically locomoting between two vertical{"} walls in a reduced-gravity planar environment of an inclined air table. During flight, springy legs are compressed to store elastic energy. At impact, this potential energy is quickly converted to kinetic energy. In this paper, we demonstrate that simple feedback control strategies with a high-speed vision system can be used to control the Parkour- Bot to bounce in place, climb up and climb down.",
author = "A. Long and A. Degani and K. Lynch",
year = "2012",
doi = "10.1142/9789814415958\_0053",
language = "אנגלית",
isbn = "9789814415941",
series = "Adaptive Mobile Robotics - Proceedings of the 15th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines, CLAWAR 2012",
publisher = "World Scientific",
pages = "409--416",
booktitle = "Adaptive Mobile Robotics - Proceedings of the 15th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines, CLAWAR 2012",
address = "ארצות הברית",
note = "15th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines, CLAWAR 2012 ; Conference date: 23-07-2012 Through 26-07-2012",

}

Over-tube apparatus for increasing the capabilities of an articulated robotic probe

Degani A, Tully S, Zubiate B, Choset H. Over-tube apparatus for increasing the capabilities of an articulated robotic probe. In 2012 IEEE International Conference on Robotics and Automation, ICRA 2012. Institute of Electrical and Electronics Engineers Inc. 2012. p. 3533-3534. 6224668. (Proceedings - IEEE International Conference on Robotics and Automation). [DOI] [Link to publication in Scopus]
 

This video elaborates on a new active and controllable over-tube addition to the highly articulated robotic probe; the HARP. This over-tube allows the current HARP mechanism to double its overall length and allows it to perform more complex tasks. We explain the design concept of the current HARP and the novel over-tube mechanism and show two proof-of-concept experiments demonstrating the use of the active over-tube.

@inproceedings{c22e3942b7e04ea5835132e8cf4ce159,
title = "Over-tube apparatus for increasing the capabilities of an articulated robotic probe",
abstract = "This video elaborates on a new active and controllable over-tube addition to the highly articulated robotic probe; the HARP. This over-tube allows the current HARP mechanism to double its overall length and allows it to perform more complex tasks. We explain the design concept of the current HARP and the novel over-tube mechanism and show two proof-of-concept experiments demonstrating the use of the active over-tube.",
author = "Amir Degani and Stephen Tully and Brett Zubiate and Howie Choset",
year = "2012",
doi = "10.1109/ICRA.2012.6224668",
language = "אנגלית",
isbn = "9781467314039",
series = "Proceedings - IEEE International Conference on Robotics and Automation",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
pages = "3533--3534",
booktitle = "2012 IEEE International Conference on Robotics and Automation, ICRA 2012",
note = " 2012 IEEE International Conference on Robotics and Automation, ICRA 2012 ; Conference date: 14-05-2012 Through 18-05-2012",

}

The basic mechanics of bipedal walking lead to asymmetric behavior

Gregg RD, Degani A, Dhaher Y, Lynch KM. The basic mechanics of bipedal walking lead to asymmetric behavior. In 2011 IEEE International Conference on Rehabilitation Robotics, ICORR 2011 - Rehab Week Zurich 2011. 2011. 5975459. (IEEE International Conference on Rehabilitation Robotics). [DOI] [Link to publication in Scopus]
 

This paper computationally investigates whether gait asymmetries can be attributed in part to basic bipedal mechanics independent of motor control. Using a symmetrical rigid-body model known as the compass-gait biped, we show that changes in environmental or physiological parameters can facilitate asymmetry in gait kinetics at fast walking speeds. In the environmental case, the asymmetric family of high-speed gaits is in fact more stable than the symmetric family of low-speed gaits. These simulations suggest that lower extremity mechanics might play a direct role in functional and pathological asymmetries reported in human walking, where velocity may be a common variable in the emergence and growth of asymmetry.

@inproceedings{a091923d0ba84117add3481e51a0d616,
title = "The basic mechanics of bipedal walking lead to asymmetric behavior",
abstract = "This paper computationally investigates whether gait asymmetries can be attributed in part to basic bipedal mechanics independent of motor control. Using a symmetrical rigid-body model known as the compass-gait biped, we show that changes in environmental or physiological parameters can facilitate asymmetry in gait kinetics at fast walking speeds. In the environmental case, the asymmetric family of high-speed gaits is in fact more stable than the symmetric family of low-speed gaits. These simulations suggest that lower extremity mechanics might play a direct role in functional and pathological asymmetries reported in human walking, where velocity may be a common variable in the emergence and growth of asymmetry.",
author = "Gregg, \{Robert D.\} and Amir Degani and Yasin Dhaher and Lynch, \{Kevin M.\}",
year = "2011",
doi = "10.1109/ICORR.2011.5975459",
language = "אנגלית",
isbn = "9781424498628",
series = "IEEE International Conference on Rehabilitation Robotics",
booktitle = "2011 IEEE International Conference on Rehabilitation Robotics, ICORR 2011 - Rehab Week Zurich 2011",
note = "Rehab Week Zurich 2011 - 2011 IEEE International Conference on Rehabilitation Robotics, ICORR 2011 ; Conference date: 27-06-2011 Through 01-07-2011",

}

The ParkourBot - A dynamic BowLeg climbing robot

Degani A, Feng S, Benjamin Brown H, Lynch KM, Choset H, Mason MT. The ParkourBot - A dynamic BowLeg climbing robot. In 2011 IEEE International Conference on Robotics and Automation, ICRA 2011. 2011. p. 795-801. 5979937. (Proceedings - IEEE International Conference on Robotics and Automation). [DOI] [Link to publication in Scopus]
 

The ParkourBot is an efficient and dynamic climbing robot. The robot comprises two springy legs connected to a body. Leg angle and spring tension are independently controlled. The robot climbs between two parallel walls by leaping from one wall to the other. During flight, the robot stores elastic energy in its springy legs and automatically releases the energy to "kick off" the wall during touch down. This paper elaborates on the mechanical design of the ParkourBot. We use a simple SLIP model to simulate the ParkourBot motion and stability. Finally, we detail experimental results, from open-loop climbing motions to closed-loop stabilization of climbing height in a planar, reduced gravity environment.

@inproceedings{ee4a6ca2c2c54b0cb4c2b093e9a84ff9,
title = "The ParkourBot - A dynamic BowLeg climbing robot",
abstract = "The ParkourBot is an efficient and dynamic climbing robot. The robot comprises two springy legs connected to a body. Leg angle and spring tension are independently controlled. The robot climbs between two parallel walls by leaping from one wall to the other. During flight, the robot stores elastic energy in its springy legs and automatically releases the energy to {"}kick off{"} the wall during touch down. This paper elaborates on the mechanical design of the ParkourBot. We use a simple SLIP model to simulate the ParkourBot motion and stability. Finally, we detail experimental results, from open-loop climbing motions to closed-loop stabilization of climbing height in a planar, reduced gravity environment.",
author = "Amir Degani and Siyuan Feng and \{Benjamin Brown\}, H. and Lynch, \{Kevin M.\} and Howie Choset and Mason, \{Matthew T.\}",
year = "2011",
doi = "10.1109/ICRA.2011.5979937",
language = "אנגלית",
isbn = "9781612843865",
series = "Proceedings - IEEE International Conference on Robotics and Automation",
pages = "795--801",
booktitle = "2011 IEEE International Conference on Robotics and Automation, ICRA 2011",
note = "2011 IEEE International Conference on Robotics and Automation, ICRA 2011 ; Conference date: 09-05-2011 Through 13-05-2011",

}

Minimalistic, dynamic, tube climbing robot

Degani A, Feng S, Choset H, Mason MT. Minimalistic, dynamic, tube climbing robot. In 2010 IEEE International Conference on Robotics and Automation, ICRA 2010. 2010. p. 1100-1101. 5509948. (Proceedings - IEEE International Conference on Robotics and Automation). [DOI] [Link to publication in Scopus]
 

This video shows the investigation of a novel minimalistic, dynamic climbing robot which can climb up tubes of different shapes using a simple dc motor. The motor moves an eccentric mass in a constant velocity. The location of the eccentric mass relative to the contact point determines the stability and the direction of the climbing motion. We present the analysis of this mechanism, simulation and experimental results.

@inproceedings{98f03da530284a0b9dea740d058069fc,
title = "Minimalistic, dynamic, tube climbing robot",
abstract = "This video shows the investigation of a novel minimalistic, dynamic climbing robot which can climb up tubes of different shapes using a simple dc motor. The motor moves an eccentric mass in a constant velocity. The location of the eccentric mass relative to the contact point determines the stability and the direction of the climbing motion. We present the analysis of this mechanism, simulation and experimental results.",
author = "Amir Degani and Siyuan Feng and Howie Choset and Mason, \{Matthew T.\}",
year = "2010",
doi = "10.1109/ROBOT.2010.5509948",
language = "אנגלית",
isbn = "9781424450381",
series = "Proceedings - IEEE International Conference on Robotics and Automation",
pages = "1100--1101",
booktitle = "2010 IEEE International Conference on Robotics and Automation, ICRA 2010",
note = "2010 IEEE International Conference on Robotics and Automation, ICRA 2010 ; Conference date: 03-05-2010 Through 07-05-2010",

}

DSAC - Dynamic, Single Actuated Climber: Local stability and bifurcations

Degani A, Choset H, Mason MT. DSAC - Dynamic, Single Actuated Climber: Local stability and bifurcations. In 2010 IEEE International Conference on Robotics and Automation, ICRA 2010. 2010. p. 2803-2809. 5509215. (Proceedings - IEEE International Conference on Robotics and Automation). [DOI] [Link to publication in Scopus]
 

This paper investigates a novel mechanism, called DSAC for Dynamic, Single Actuated Climber, which propels itself upwards by oscillating its leg in a symmetric fashion using a single actuator. This mechanism achieves dynamic, vertical motion while retaining simplicity in design and control. We explore the local orbital stability of the DSAC mechanism. We use the Poincaré map method with a well chosen Poincaré section to simplify the problem by reducing the dimension of the Poincaré map to 3-dimensions. We find the stable regions while varying the controls input and some of the mechanism's parameters. Moreover, in response to a continuous change in a parameter of the mechanism, the symmetric and steady stable gait of the mechanism gradually evolves through a regime of period doubling bifurcations.

@inproceedings{fe57f752b5324ca9b6a5b87bd3b6c345,
title = "DSAC - Dynamic, Single Actuated Climber: Local stability and bifurcations",
abstract = "This paper investigates a novel mechanism, called DSAC for Dynamic, Single Actuated Climber, which propels itself upwards by oscillating its leg in a symmetric fashion using a single actuator. This mechanism achieves dynamic, vertical motion while retaining simplicity in design and control. We explore the local orbital stability of the DSAC mechanism. We use the Poincar{\'e} map method with a well chosen Poincar{\'e} section to simplify the problem by reducing the dimension of the Poincar{\'e} map to 3-dimensions. We find the stable regions while varying the controls input and some of the mechanism's parameters. Moreover, in response to a continuous change in a parameter of the mechanism, the symmetric and steady stable gait of the mechanism gradually evolves through a regime of period doubling bifurcations.",
author = "Amir Degani and Howie Choset and Mason, \{Matthew T.\}",
year = "2010",
doi = "10.1109/ROBOT.2010.5509215",
language = "אנגלית",
isbn = "9781424450381",
series = "Proceedings - IEEE International Conference on Robotics and Automation",
pages = "2803--2809",
booktitle = "2010 IEEE International Conference on Robotics and Automation, ICRA 2010",
note = "2010 IEEE International Conference on Robotics and Automation, ICRA 2010 ; Conference date: 03-05-2010 Through 07-05-2010",

}

A novel highly articulated robotic surgical system for epicardial ablation

Ota T, Degani A, Schwartzman D, Zubiate B, McGarvey J, Choset H et al. A novel highly articulated robotic surgical system for epicardial ablation. In Proceedings of the 30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS'08. IEEE Computer Society. 2008. p. 250-253. 4649137. (Proceedings of the 30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS'08 - "Personalized Healthcare through Technology"). [DOI] [Link to publication in Scopus]
 

We have developed a novel, highly articulated robotic surgical system to enable minimally invasive intrapericardial interventions through a subxiphoid approach and have performed preliminary tests of epicardial left atrial ablation in porcine (N = 3) and human cadaver (N = 2) preparations. In this study, the novel highly articulated robotic surgical system successfully provided safe epicardial ablations to the left atrium in porcine beating heart models via a subxiphoid approach. We have also performed complex guidance of the robot and subsequent ablation in a cadaveric preparation for successful pulmonary vein isolation.

@inproceedings{e6d9fdb2cd164930972c3d25b7769f05,
title = "A novel highly articulated robotic surgical system for epicardial ablation",
abstract = "We have developed a novel, highly articulated robotic surgical system to enable minimally invasive intrapericardial interventions through a subxiphoid approach and have performed preliminary tests of epicardial left atrial ablation in porcine (N = 3) and human cadaver (N = 2) preparations. In this study, the novel highly articulated robotic surgical system successfully provided safe epicardial ablations to the left atrium in porcine beating heart models via a subxiphoid approach. We have also performed complex guidance of the robot and subsequent ablation in a cadaveric preparation for successful pulmonary vein isolation.",
author = "Takeyoshi Ota and Amir Degani and David Schwartzman and Brett Zubiate and Jeremy McGarvey and Howie Choset and Zenati, \{Marco A.\}",
year = "2008",
doi = "10.1109/iembs.2008.4649137",
language = "אנגלית",
isbn = "9781424418152",
series = "Proceedings of the 30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS'08 - {"}Personalized Healthcare through Technology{"}",
publisher = "IEEE Computer Society",
pages = "250--253",
booktitle = "Proceedings of the 30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS'08",
note = "30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS'08 ; Conference date: 20-08-2008 Through 25-08-2008",

}

Highly articulated robotic probe for minimally invasive surgery

Degani A, Choset H, Zubiate B, Ota T, Zenati M. Highly articulated robotic probe for minimally invasive surgery. In Proceedings of the 30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS'08. IEEE Computer Society. 2008. p. 3273-3276. 4649903. (Proceedings of the 30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS'08 - "Personalized Healthcare through Technology"). [DOI] [Link to publication in Scopus]
 

We have developed a novel highly articulated robotic probe (HARP) that can thread through tightly packed volumes without disturbing the surrounding tissues and organs. We use cardiac surgery as the focal application of this work. As such, we have designed the HARP to enter the pericardial cavity through a subxiphoid port. The surgeon can effectively reach remote intrapericardial locations on the epicardium and deliver therapeutic interventions under direct control. Our device differs from others in that we use conventional actuation and still have great maneuverability. We have performed proof-of-concept clinical experiments to give us preliminary validation of the ideas presented here.

@inproceedings{3057690ad2774bc6b0d0984258e3fc03,
title = "Highly articulated robotic probe for minimally invasive surgery",
abstract = "We have developed a novel highly articulated robotic probe (HARP) that can thread through tightly packed volumes without disturbing the surrounding tissues and organs. We use cardiac surgery as the focal application of this work. As such, we have designed the HARP to enter the pericardial cavity through a subxiphoid port. The surgeon can effectively reach remote intrapericardial locations on the epicardium and deliver therapeutic interventions under direct control. Our device differs from others in that we use conventional actuation and still have great maneuverability. We have performed proof-of-concept clinical experiments to give us preliminary validation of the ideas presented here.",
keywords = "Cardiac surgery, Medical robot, Minimally invasive surgery, Snake robot",
author = "Amir Degani and Howie Choset and Brett Zubiate and Takeyoshi Ota and Marco Zenati",
year = "2008",
doi = "10.1109/iembs.2008.4649903",
language = "אנגלית",
isbn = "9781424418152",
series = "Proceedings of the 30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS'08 - {"}Personalized Healthcare through Technology{"}",
publisher = "IEEE Computer Society",
pages = "3273--3276",
booktitle = "Proceedings of the 30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS'08",
note = "30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS'08 ; Conference date: 20-08-2008 Through 25-08-2008",

}

A dynamic single actuator vertical climbing robot

Degani A, Shapiro A, Choset H, Mason MT. A dynamic single actuator vertical climbing robot. In Proceedings of the 2007 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2007. 2007. p. 2901-2906. 4399200. (IEEE International Conference on Intelligent Robots and Systems). [DOI] [Link to publication in Scopus]
 

A climbing robot mechanism is introduced, which uses dynamic movements to climb between two parallel vertical walls. This robot relies on its own internal dynamic motions to gain height, unlike previous mechanisms which are quasi-static. One benefit of dynamics is that it allows climbing with only a single actuated degree of freedom. We show with analysis, simulations and experiments that this dynamic robot is capable of climbing vertically between parallel walls. We introduce simplifications that enable us to obtain closed form approximations of the robot motion. Furthermore, this provides us with some design considerations and insights into the mechanism's ability to climb.

@inproceedings{76f923b7f8a045bda7b0d86c4cf9b86d,
title = "A dynamic single actuator vertical climbing robot",
abstract = "A climbing robot mechanism is introduced, which uses dynamic movements to climb between two parallel vertical walls. This robot relies on its own internal dynamic motions to gain height, unlike previous mechanisms which are quasi-static. One benefit of dynamics is that it allows climbing with only a single actuated degree of freedom. We show with analysis, simulations and experiments that this dynamic robot is capable of climbing vertically between parallel walls. We introduce simplifications that enable us to obtain closed form approximations of the robot motion. Furthermore, this provides us with some design considerations and insights into the mechanism's ability to climb.",
author = "Amir Degani and Amir Shapiro and Howie Choset and Mason, \{Matthew T.\}",
year = "2007",
doi = "10.1109/IROS.2007.4399200",
language = "אנגלית",
isbn = "1424409128",
series = "IEEE International Conference on Intelligent Robots and Systems",
pages = "2901--2906",
booktitle = "Proceedings of the 2007 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2007",
note = "2007 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2007 ; Conference date: 29-10-2007 Through 02-11-2007",

}

Percutaneous intrapericardial interventions using a highly articulated robotic probe

Degani A, Choset H, Wolf A, Ota T, Zenati MA. Percutaneous intrapericardial interventions using a highly articulated robotic probe. In Proceedings of the First IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 2006, BioRob 2006. 2006. p. 7-12. 1639051. (Proceedings of the First IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 2006, BioRob 2006). [DOI] [Link to publication in Scopus]
 

In order to overcome the limitations of currently available assistive technologies for minimally invasive surgery (MIS), we have developed a novel highly articulated robotic probe (HARP) that can exploit its snake-like structure to navigate in a confined anatomical environment while minimally interacting with the environment along its path. We believe that for procedures involving epicardial interventions on the beating heart, cardiac MIS can be effectively realized with the HARP, entering the pericardial cavity through a subxiphoid port, reaching remote intrapericardial locations on the epicardium without causing hemodynamic and electrophysiologic interference and delivering therapeutic interventions under the direct control of the surgeon.

@inproceedings{4ef352c8abe6400f993125a804b36353,
title = "Percutaneous intrapericardial interventions using a highly articulated robotic probe",
abstract = "In order to overcome the limitations of currently available assistive technologies for minimally invasive surgery (MIS), we have developed a novel highly articulated robotic probe (HARP) that can exploit its snake-like structure to navigate in a confined anatomical environment while minimally interacting with the environment along its path. We believe that for procedures involving epicardial interventions on the beating heart, cardiac MIS can be effectively realized with the HARP, entering the pericardial cavity through a subxiphoid port, reaching remote intrapericardial locations on the epicardium without causing hemodynamic and electrophysiologic interference and delivering therapeutic interventions under the direct control of the surgeon.",
keywords = "Cardiac surgery, Medical robot, Minimally invasive surgery",
author = "Amir Degani and Howie Choset and Alon Wolf and Takeyoshi Ota and Zenati, \{Marco A.\}",
year = "2006",
doi = "10.1109/BIOROB.2006.1639051",
language = "אנגלית",
isbn = "1424400406",
series = "Proceedings of the First IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 2006, BioRob 2006",
pages = "7--12",
booktitle = "Proceedings of the First IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 2006, BioRob 2006",
note = "1st IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 2006, BioRob 2006 ; Conference date: 20-02-2006 Through 22-02-2006",

}

Highly articulated robotic probe for minimally invasive surgery

Degani A, Choset H, Wolf A, Zenati MA. Highly articulated robotic probe for minimally invasive surgery. In Proceedings 2006 IEEE International Conference on Robotics and Automation, ICRA 2006. 2006. p. 4167-4172. 1642343. (Proceedings - IEEE International Conference on Robotics and Automation). [DOI] [Link to publication in Scopus]
 

We have developed a novel highly articulated robotic probe (HARP) that can thread through tightly packed volumes without disturbing the surrounding tissues and organs. We use cardiac surgery as the focal application of this work. As such, we have designed the HARP to enter the pericardial cavity through a subxiphoid port. The surgeon can effectively reach remote intrapericardial locations on the epicardium and deliver therapeutic interventions under direct control. Reducing the overall cross-sectional diameter of the mechanism was the main challenge in the design of this device. Our device differs from others in that we use conventional actuation and still have good maneuverability. We have performed simple proof-of-concept clinical experiments to give preliminary validation of the ideas presented here.

@inproceedings{3df6a989c5ea48dc9d83346d1a43772e,
title = "Highly articulated robotic probe for minimally invasive surgery",
abstract = "We have developed a novel highly articulated robotic probe (HARP) that can thread through tightly packed volumes without disturbing the surrounding tissues and organs. We use cardiac surgery as the focal application of this work. As such, we have designed the HARP to enter the pericardial cavity through a subxiphoid port. The surgeon can effectively reach remote intrapericardial locations on the epicardium and deliver therapeutic interventions under direct control. Reducing the overall cross-sectional diameter of the mechanism was the main challenge in the design of this device. Our device differs from others in that we use conventional actuation and still have good maneuverability. We have performed simple proof-of-concept clinical experiments to give preliminary validation of the ideas presented here.",
keywords = "Cardiac surgery, Medical robot, Minimally invasive surgery, Snake robot",
author = "Amir Degani and Howie Choset and Alon Wolf and Zenati, \{Marco A.\}",
year = "2006",
doi = "10.1109/ROBOT.2006.1642343",
language = "אנגלית",
isbn = "0780395069",
series = "Proceedings - IEEE International Conference on Robotics and Automation",
pages = "4167--4172",
booktitle = "Proceedings 2006 IEEE International Conference on Robotics and Automation, ICRA 2006",
note = "2006 IEEE International Conference on Robotics and Automation, ICRA 2006 ; Conference date: 15-05-2006 Through 19-05-2006",

}

Graphical singularity analysis of planar parallel manipulators

Degani A, Wolf A. Graphical singularity analysis of planar parallel manipulators. In Proceedings 2006 IEEE International Conference on Robotics and Automation, ICRA 2006. 2006. p. 751-756. 1641800. (Proceedings - IEEE International Conference on Robotics and Automation). [DOI] [Link to publication in Scopus]
 

This paper introduces a new approach to identify singularities of planar parallel manipulators (PPMs). This method is based on Maxwell's reciprocal figure theory which establishes a duality between self stressed frameworks and reciprocal figures, which are abstract dual representations of frameworks. We use line geometry tools to introduce a new graphical construction called the Mechanism's Line of action Graph (MLG). The MLG is introduced in order to implement Maxwell's reciprocal figure theory to mechanisms. We show that the configurations where the MLG has a connected reciprocal figure imply a singularity in the mechanism. This singularity analysis tool is also used to trace the singularity loci of the PPM. Finally, we provide detailed examples of the singularity analysis of two common PPMs; one consists of three limbs with a passive revolute joint, actuated prismatic joint and another passive revolute joint (3-RPR), the other consists of three limbs with three revolute joints, where only the first is actuated (3-RRR).

@inproceedings{41437eebcd73453294cb6873a5cb7671,
title = "Graphical singularity analysis of planar parallel manipulators",
abstract = "This paper introduces a new approach to identify singularities of planar parallel manipulators (PPMs). This method is based on Maxwell's reciprocal figure theory which establishes a duality between self stressed frameworks and reciprocal figures, which are abstract dual representations of frameworks. We use line geometry tools to introduce a new graphical construction called the Mechanism's Line of action Graph (MLG). The MLG is introduced in order to implement Maxwell's reciprocal figure theory to mechanisms. We show that the configurations where the MLG has a connected reciprocal figure imply a singularity in the mechanism. This singularity analysis tool is also used to trace the singularity loci of the PPM. Finally, we provide detailed examples of the singularity analysis of two common PPMs; one consists of three limbs with a passive revolute joint, actuated prismatic joint and another passive revolute joint (3-RPR), the other consists of three limbs with three revolute joints, where only the first is actuated (3-RRR).",
keywords = "Graphical analysis, Maxwell's reciprocal figure theory, Parallel manipulators, Singularity",
author = "Amir Degani and Alon Wolf",
year = "2006",
doi = "10.1109/ROBOT.2006.1641800",
language = "אנגלית",
isbn = "0780395069",
series = "Proceedings - IEEE International Conference on Robotics and Automation",
pages = "751--756",
booktitle = "Proceedings 2006 IEEE International Conference on Robotics and Automation, ICRA 2006",
note = "2006 IEEE International Conference on Robotics and Automation, ICRA 2006 ; Conference date: 15-05-2006 Through 19-05-2006",

}

Classifying knee pathologies using instantaneous screws of the six degrees-of-freedom knee motion

Wolf A, Degani A. Classifying knee pathologies using instantaneous screws of the six degrees-of-freedom knee motion. In Proceedings of the First IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 2006, BioRob 2006. 2006. p. 1047-1052. 1639230. (Proceedings of the First IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 2006, BioRob 2006). [DOI] [Link to publication in Scopus]
 

We address the problem of knee pathology assessment by using screw theory to describe the knee motion and by using the screw representation of the motion as an input to a machine learning classifier. The flexions of knees with different pathologies are tracked using an optical tracking system. The screw parameters which describe the transformation of the tibia with respect to the femur in each two successive observation are represented as the instantaneous screw axis of the motion given in its Plücker line coordinate, along with its corresponding pitch. The set of screw parameters associated with a particular knee with a given pathology is then identified and clustered in R6 to form a "signature" of the motion for the given pathology. Bone model and two cadaver knees with different pathologies were tracked, and the resulting screws were used to train a classifier system. The system was then tested successfully with new, never trained before data. The classifier demonstrated a very high success rate in identifying the knee pathology.

@inproceedings{f7bce4bd66854968abbe8271aed544f2,
title = "Classifying knee pathologies using instantaneous screws of the six degrees-of-freedom knee motion",
abstract = "We address the problem of knee pathology assessment by using screw theory to describe the knee motion and by using the screw representation of the motion as an input to a machine learning classifier. The flexions of knees with different pathologies are tracked using an optical tracking system. The screw parameters which describe the transformation of the tibia with respect to the femur in each two successive observation are represented as the instantaneous screw axis of the motion given in its Pl{\"u}cker line coordinate, along with its corresponding pitch. The set of screw parameters associated with a particular knee with a given pathology is then identified and clustered in R6 to form a {"}signature{"} of the motion for the given pathology. Bone model and two cadaver knees with different pathologies were tracked, and the resulting screws were used to train a classifier system. The system was then tested successfully with new, never trained before data. The classifier demonstrated a very high success rate in identifying the knee pathology.",
keywords = "Knee kinematics, Pathology classification, Screw axis, Support vector machines",
author = "Alon Wolf and Amir Degani",
year = "2006",
doi = "10.1109/BIOROB.2006.1639230",
language = "אנגלית",
isbn = "1424400406",
series = "Proceedings of the First IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 2006, BioRob 2006",
pages = "1047--1052",
booktitle = "Proceedings of the First IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 2006, BioRob 2006",
note = "1st IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 2006, BioRob 2006 ; Conference date: 20-02-2006 Through 22-02-2006",

}

Classifying knee pathologies using instantaneous screws of the six degrees-of-freedom knee motion

Wolf A, Degani A. Classifying knee pathologies using instantaneous screws of the six degrees-of-freedom knee motion. In Proceedings 2006 IEEE International Conference on Robotics and Automation, ICRA 2006. 2006. p. 2946-2951. 1642149. (Proceedings - IEEE International Conference on Robotics and Automation). [DOI] [Link to publication in Scopus]
 

We address the problem of knee pathology assessment by using screw theory to describe the knee motion and by using the screw representation of the motion as an input to a machine learning classifier. The flexions of knees with different pathologies are tracked using an optical tracking system. The screw parameters which describe the transformation of the tibia with respect to the femur in each two successive observation are represented as the instantaneous screw axis of the motion given in its Plücker line coordinate, along with its corresponding pitch. The set of screw parameters associated with a particular knee with a given pathology is then identified and clustered in R6 to form a "signature" of the motion for the given pathology. Bone model and two cadaver knees with different pathologies were tracked, and the resulting screws were used to train a classifier system. The system was then tested successfully with new, never trained before data. The classifier demonstrated a very high success rate in identifying the knee pathology.

@inproceedings{8558dc3219444754bb665b0f1fc068d4,
title = "Classifying knee pathologies using instantaneous screws of the six degrees-of-freedom knee motion",
abstract = "We address the problem of knee pathology assessment by using screw theory to describe the knee motion and by using the screw representation of the motion as an input to a machine learning classifier. The flexions of knees with different pathologies are tracked using an optical tracking system. The screw parameters which describe the transformation of the tibia with respect to the femur in each two successive observation are represented as the instantaneous screw axis of the motion given in its Pl{\"u}cker line coordinate, along with its corresponding pitch. The set of screw parameters associated with a particular knee with a given pathology is then identified and clustered in R6 to form a {"}signature{"} of the motion for the given pathology. Bone model and two cadaver knees with different pathologies were tracked, and the resulting screws were used to train a classifier system. The system was then tested successfully with new, never trained before data. The classifier demonstrated a very high success rate in identifying the knee pathology.",
keywords = "Knee kinematic, Pathology classification, Screw axis, Support vector machines",
author = "Alon Wolf and Amir Degani",
year = "2006",
doi = "10.1109/ROBOT.2006.1642149",
language = "אנגלית",
isbn = "0780395069",
series = "Proceedings - IEEE International Conference on Robotics and Automation",
pages = "2946--2951",
booktitle = "Proceedings 2006 IEEE International Conference on Robotics and Automation, ICRA 2006",
note = "2006 IEEE International Conference on Robotics and Automation, ICRA 2006 ; Conference date: 15-05-2006 Through 19-05-2006",

}

More

Shepherd: A fabrication-oriented tool for simulation and control of mobile robotic platforms for collaborative earthworks

Shaked T, Degani A. Shepherd: A fabrication-oriented tool for simulation and control of mobile robotic platforms for collaborative earthworks. 2021. Paper presented at 2021 Association for Computer Aided Design in Architecture Annual Conference, ACADIA 2021, Virtual, Online. [Link to publication in Scopus]
 

Recent advancements in robotics empower the exploration of remote construction methods aimed at reducing the risk for workers. As the global pandemic places construction workers and their communities at high risk for disease, the need for remote construction methods increases. Such methods depend on the complicated task of controlling mobile robotic platforms in real-time. In this context, this paper presents workin-progress in development and experimentation with a tool for collaborative earthworks using multi-agent unmanned ground vehicles. Expanding the field of collective robotic construction, this research simplifies the use of mobile robots and enables their operation using a design platform. Shepherd, a fabrication-oriented tool for simulation and control of mobile robotic platforms is presented, and its capacities are demonstrated in an earthworks case study. The case study exemplifies the potential of this approach to change the role of design tools in the operation and adoption of mobile multi-robotic platforms, thus contributing to robotic fabrication in architecture, landscape architecture, and construction.

@conference{b4e1e541fa634639896fa83972b950fa,
title = "Shepherd: A fabrication-oriented tool for simulation and control of mobile robotic platforms for collaborative earthworks",
abstract = "Recent advancements in robotics empower the exploration of remote construction methods aimed at reducing the risk for workers. As the global pandemic places construction workers and their communities at high risk for disease, the need for remote construction methods increases. Such methods depend on the complicated task of controlling mobile robotic platforms in real-time. In this context, this paper presents workin-progress in development and experimentation with a tool for collaborative earthworks using multi-agent unmanned ground vehicles. Expanding the field of collective robotic construction, this research simplifies the use of mobile robots and enables their operation using a design platform. Shepherd, a fabrication-oriented tool for simulation and control of mobile robotic platforms is presented, and its capacities are demonstrated in an earthworks case study. The case study exemplifies the potential of this approach to change the role of design tools in the operation and adoption of mobile multi-robotic platforms, thus contributing to robotic fabrication in architecture, landscape architecture, and construction.",
author = "Tom Shaked and Amir Degani",
note = "Publisher Copyright: {\textcopyright} Association for Computer Aided Design in Architecture Annual Conference, ACADIA 2021.; 2021 Association for Computer Aided Design in Architecture Annual Conference, ACADIA 2021 ; Conference date: 03-11-2021 Through 06-11-2021",
year = "2021",
language = "אנגלית",

}

Enabling medical robotics for the next generation of minimally invasive procedures: Minimally invasive cardiac surgery with single port access

Choset H, Zenati M, Ota T, Degani A, Schwartzman D, Zubiate B et al. Enabling medical robotics for the next generation of minimally invasive procedures: Minimally invasive cardiac surgery with single port access. In Surgical Robotics: Systems Applications and Visions. Springer US. 2011. p. 257-270 [DOI] [Link to publication in Scopus]
 

Minimally invasive cardiac surgery (MICS) is an evolving strategy aimed at delivering the desired form of cardiovascular therapy with the least change in homeostasis, ideally matching the same degree of invasiveness of percutaneous cardiac interventions. Cardiac surgery is different from other surgical procedures because the large sternotomy incision required to access the heart requires general endotracheal anesthesia (GETA) and the heart-lung machine that is required for open-heart surgery (e.g. valve repair) adds further morbidity. We have developed a novel, highly articulated robotic surgical system (CardioARM) to enable minimally invasive intrapericardial therapeutic delivery through a subxiphoid approach. The CardioARM is a robotic surgical system consisting of serially connected rigid cylindrical links housing flexible working ports through which catheter-based tools for therapy and imaging can be advanced. The CardioARM is controlled via a computer-driven user interface which is operated outside of the operative field. We believe single port access to be key to the success of the CardioARM. We have performed preliminary proof of concept studies in a porcine preparation by performing epicardial ablation.

@inbook{8e8a4de766ca419fbaf6fdc0cf205c5e,
title = "Enabling medical robotics for the next generation of minimally invasive procedures: Minimally invasive cardiac surgery with single port access",
abstract = "Minimally invasive cardiac surgery (MICS) is an evolving strategy aimed at delivering the desired form of cardiovascular therapy with the least change in homeostasis, ideally matching the same degree of invasiveness of percutaneous cardiac interventions. Cardiac surgery is different from other surgical procedures because the large sternotomy incision required to access the heart requires general endotracheal anesthesia (GETA) and the heart-lung machine that is required for open-heart surgery (e.g. valve repair) adds further morbidity. We have developed a novel, highly articulated robotic surgical system (CardioARM) to enable minimally invasive intrapericardial therapeutic delivery through a subxiphoid approach. The CardioARM is a robotic surgical system consisting of serially connected rigid cylindrical links housing flexible working ports through which catheter-based tools for therapy and imaging can be advanced. The CardioARM is controlled via a computer-driven user interface which is operated outside of the operative field. We believe single port access to be key to the success of the CardioARM. We have performed preliminary proof of concept studies in a porcine preparation by performing epicardial ablation.",
keywords = "Minimally invasive cardiac surgery, Single port surgery, Snake robotics, Surgical robotics",
author = "Howie Choset and Marco Zenati and Takeyoshi Ota and Amir Degani and David Schwartzman and Brett Zubiate and Cornell Wright",
year = "2011",
doi = "10.1007/978-1-4419-1126-1\_12",
language = "אנגלית",
isbn = "9781441911254",
pages = "257--270",
booktitle = "Surgical Robotics",
publisher = "Springer US",

}

Graphical singularity analysis of 3-DOF planar parallel manipulators

Degani A, Wolf A. Graphical singularity analysis of 3-DOF planar parallel manipulators. In Lennarčič J, Roth B, editors, Advances in Robot Kinematics. Springer Netherlands. 2006. p. 229-238. Chapter 25 [DOI]
@inbook{e31af5214b4746a2b2786864bbd47352,
title = "Graphical singularity analysis of 3-DOF planar parallel manipulators",
author = "A. Degani and A. Wolf",
year = "2006",
doi = "10.1007/978-1-4020-4941-5_25",
language = "אנגלית",
isbn = "978-1-4020-4940-8",
pages = "229--238",
editor = "Jadran Lennar{\v c}i{\v c} and B. Roth",
booktitle = "Advances in Robot Kinematics",
publisher = "Springer Netherlands",
address = "הולנד",

}

© 2026 Copyright Elyachar Central Library, Technion - Israel Institute of Technology